Annual Index

1 min read 341 views

Click on the issue to view the content
You must be logged in to read the articles

Volume 162 | 2026

Volume 161 | 2025

Filter further magazine issues (2024–2020)
Volume 160 | 2024

Volume 159 | 2023

Volume 158 | 2022

Volume 157 | 2021

Volume 156 | 2020

Filter further magazine issues (2020–2015)
Volume 155 | 2019

Volume 154 | 2018

Volume 153 | 2017

Volume 152 | 2016

Volume 151 | 2015

Annual Index

Author:Title / AbstractRead:
Kai van de Loo
Energy reference projection for Germany to 2030/2050
In July 2014 the Federal Ministry for Economic Affairs and Energy (BMWi) in Berlin published a new Energy Reference Projection for Germany (1). This study was carried out for the BMWi by the Institute of Energy Economics (EWI), Cologne, the Institute of Economic Structures Research (GWS), Osnabruck, and the Economic Research Institute AG, Basel and Berlin, under the title‚ Development of energy markets – energy reference projection‘. The three institutes had already produced case scenarios for the Federal Government back in 2010 and 2011. The current energy reference projection prepared by EWI, GWS and Prognos contains in particular a ‚conditional projection‘ with a timeline to 2030, in accordance with the existing and foreseeable framework conditions and trends in the German energy market. It therefore essentially raises the central question: ‚What is set to be the most likely energy-policy development by the year 2030?‘


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Wolfram Kudla,
Matthias Gruner,
Philipp Herold,
Michael Jobmann
Shaft sealing concepts for high-level radioactive waste repositories based on the host-rock options rock salt and clay stone
Unlike the shaft barriers used for the dry preservation of former mine workings and underground storage sites, shaft seals designed for radioactive-waste repositories must also fulfil additional requirements associated with the design diversity of the sealing system. This diversity makes use of the simple redundancy principle in order to prevent the proliferation of defects. In practice this means combining several sealing elements made from different materials or from materials with different properties. The R&D project, Shaft sealing systems for final repositories for high-level radioactive waste (ELSA) – phase 2: concept design for

shaft seals and testing of the functional elements of shaft seals‘, which was funded by the Federal Ministry for Economic Affairs and Energy (BMWi), set out to investigate potential sealing elements for the two host-rock options rock salt and mudstone. This paper combines the text that the authors presented at the First International Freiberg Shaft Colloquium held at the Freiberg University of Mining and Technology on 01.10.2014 with a presentation on the sealing elements that were investigated as part of the R&D project.


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Marcus Kampen
Shaft filling at RAG – technical options for future requirements
The colliery closure programme under way in the German coal industry has also involved the permanent filling of mine shafts after underground operations have come to an end. The chosen filling technique depends very much on the future requirements that the shaft will have to meet. At RAG-operated sites the fill column in the disused shaft becomes a technical structure that has to take on important functions associated with the coal industry‘s long-term burdens and responsibilities. The planning, execution and monitoring of these shaft filling measures represent a real challenge for everyone involved.


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Thorsten Kratz,
Per Nicolai Martens
Optimization of mucking and hoisting operation in conventional shaft sinking
The mostly applied shaft sinking method is conventional shaft sinking by drilling and blasting. Using this method, almost any shaft geometry is feasible and challenging ground conditions can be sunk through with acceptable sinking performances. Particularly mucking and hoisting operations of the sinking cycle have a relevant impact on sinking performance and offer a considerable optimization potential. Nevertheless further developments concerning sinking performance are only rarely noticeable over the last decades.

At the beginning, this paper discusses parameters influencing mucking and hoisting performance. Furthermore, it is shown with assumed sinking scenarios that the selection of appropriate mucking equipment reduces mucking time significantly. The paper ends with concepts of pneumatic loading technology that offer additional options to improve sinking performance.


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Tim van Heyden,
B. Eng. Björn Wegner
Modern freeze technology in action as five shafts are sunk at two project sites
Thyssen Schachtbau GmbH, based in Mülheim an der Ruhr, has for the last five years been increasingly engaged in drilling and freeze-shaft sinking operations in the Russian Federation. A whole range of projects of this kind have been delivered during this period. The most notable of these has been a shaft sinking in the Perm region and another in the Volgograd area, both of which were commissioned by the Russian chemical company EuroChem. In the Perm -region freeze technology was employed for sinking two potash shafts for the Usolski Potash Combine. The freeze holes employed here were drilled to a depth of 270 m. After the freeze process had been completed the company used an innovative thawing technology for the first time in order to reduce theice-wall around the shafts as quickly as possible after the shaft lining had been installed, the aim being to speed up the project‘s progress. In the province of Volgograd three shafts are currently being sunk at the Gremyachinski GOK potash mining complex, each of these featuring a world record-setting uninterrupted freeze depth of 820 m. In each of the projects completed to date modern and innovative drilling, ground-freezing and thawing technology was successfully employed and as a result the client‘s requirements were met in full. Thyssen Schachtbau GmbH will continue to develop technical equipment and calculation methods for applications of this kind so that highly challenging shaft construction projects of this type can be successfully delivered in the years ahead.


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Andreas-Peter Sitte
Has Mining Report Glückauf a future? Findings of a discussion session held at the “150 years of Glückauf” symposium
The mining journal Glückauf, which was founded by the Association for Mining Interests (VbI) of Lower Rhine and Westphalia, first appeared on 1 January 1865 as a supplement to the Essener Zeitung. When the last edition was published with volume number six in 2014 the journal had been in existence for 150 years. It was against this background that the German Coal Association (GVSt) in Herne and Berlin-based Verlag Ernst & Sohn, which had published the magazine up to the end of 2014 under the name Mining Report Glückauf, decided to arrange a joint technical and scientific symposium at the Philharmonie Essen on 12 November 2014. More than 330 key technical and managerial personnel from the mining and energy sectors, mining supplier companies, trades unions, employee organisations and welfare associations had accepted the invitation to share in an interesting look back over some 150 years of industrial history. In addition to the speeches and presentations, which were reported on in some detail in the previous edition of the magazine (1), there was also a discussion session focussing on the requirements and expectations that should be met by a modern mining magazine. This paper will attempt to summarise the results of this debate.


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Helmut Ehnes
ISSA Mining
SAFETY 7.0 – 7 Golden Rules to VISION ZERO
‘Industry 4.0’ – ‘Mining 4.0’ – perhaps you have already heard of these terms? These keywords signify the next stage of industrial production. The internet and production technologies are growing closer together. Machines can communicate with one another, wherever they may happen to be located. The “Internet of Things” is the appropriate term. But what does SAFETY 7.0 mean? It is both brand new and traditional at the same time. It also has to do with the success of companies, with efficient production. And yet there is a great deal more at stake. It has to do with our lives and our safety – the supreme commodity in this world. What exactly SAFETY 7.0 means, what the number 0 stands for and the meaning of the number 7, and what this all has to do with mining will be explained in the following article.


Order now Mining Report Issue 01_2015 (including this topic)
Read article
Karl-Heinz Wennmohs
Drilling equipment for drifting and rockbolting – current developments and future trends from a manufacturer and user perspective
Over the years underground drilling equipment for drifting and rockbolting were primarily developed with a view to increasing the penetration rate. The computer technology that gradually became available was subsequently employed for control and automation of the drilling systems. This ongoing development
was not continuously pursued in more recent times until it became apparent that because of limitations to the drilling speed users and manufacturers alike were now presented with a new set of challenges.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Albert Daniels,
Ulrich Pelleter
ISSA Mining
Drilling rescue boreholes in the Chinese coal industry
In spite of intensive efforts and significant progress in the area of occupational safety, the Chinese coal industry is still a relatively dangerous environment to work in. As well as introducing a large number of operational and organisational measures, the China National Coal Development Company took another step towards improving passive safety in 2012 by ordering six German-built rigs for drilling rescue boreholes.

The sinking of rescue holes for evacuating trapped mineworkers has already saved many lives around the world, as confirmed by spectacular successes such as the ‘miracle of Lengede’ and the more recent rescue mission in Chile. Yet there is still no organised system that lays down the procedures to be followed in the event of a mining accident.

The Chinese coal industry now faces the challenge of using the available drilling technology to develop the rescue-hole technique as a systematic instrument with clearly defined objectives and results that can be replicated at any time and at any place. This paper will attempt to outline the options for developing such a system.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Kai van de Loo,
Andreas-Peter Sitte
The german coal situation 2014
The year 2014 was marked by a period of stagnation in the international coal market, the first in a number of years. In Germany there was a noticeable fall in coal consumption, mainly due to the decline in electricity production. Here the national energy transition is now making its impact felt and this has had a negative effect on coal use. Political decisions would indicate a further significant downturn in this sector in the years ahead. The year 2014 saw no more pit closures in the German coal industry, which is now in its run-down phase and has only three active collieries still in operation. However, the next closure is planned for the end of 2015 and the industry is already well advanced in its plans for the post-mining era.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Ni Weidou,
Wang Minghua,
Song Shizhong
Developing high-efficiency, low-carbon, clean coal in china
In the last few decades, China has dramatically expanded access to energy and, as a result, has achieved nearly universal electrification (Figure 1). Although this accomplishment is notable, China’s energy mix is facing several pressing issues with important domestic and global implications. China is coal-rich and, for this reason, continues to rely on coal for the majority of its primary energy (over 70 %), resulting in cost, reliability, and energy security benefits. However, coal resources are being consumed rapidly. China has built, and is continuing to grow, massive industries that hinge on the availability of coal; therefore, coal conservation through more efficient utilization is in the nation’s best interest.

This article was originally published in Cornerstone (Vol. 2), Issue 3, 2014, p. 29 – 33


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Franz-Josef Wodopia
Climate-friendly use of coal in power plants and in energy-intensive industrial facilities with carbon capture including the CO2 disposal in the methanol path
Every CO2 reduction strategy should commence with the increase in efficiency of existing power plants followed by investments in state-of-the-art technologies and most advanced plants. EURACOAL’s three step strategy therefore starts in a logical sequence with the replacement and modernisation of existing power plants. In a second step application of state-of-the-art technologies would increase the average efficiency to 45 %. In a third step the most advanced plants can reach efficiencies of about 50 %. Increasing average efficiencies step by step could reduce CO2 emissions per kWh by 21 %, 33 %, or even 40 %.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Günter Horzetzky
Contribution of Domestic Methanol Production by applying Carbon Capture Technologies and the Future Energy Mix in NRW, Germany and the EU with Regard to Security Aspects of Supply
As an alternative to petroleum the methanol production via synthesis gas – based on natural gas or biomass – may be a viable solution. But special attention should get the „green methanol“. Relevant research is to be supported, how to really produce out of CO2, sunlight and water, an important chemistry source of energy and basic raw material. There are already processes in place to use methanol as a raw material for polyethylene and polypropylene, and hence for plastics and many other things. The government of North Rhine-Westfalia supports the chemical industry to find innovative ways to a strong future. The path of ecological renewal of the industry is supported by the state government. The state government welcomes and supports a currently on-going Enquete- Commission on the future of the chemical industry in North Rhine-Westphalia. The subject of methanol economy was and is subject of discussions in the Enquete-Commission. This paper is a conclusion of the author´s speech on the Methanol Technology and Policy Congress at 3 december 2014 in Frankfort/M. in Germany.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Jürgen Beimdieck
Constructing underground water barriers in areas subject to ground movement – a real engineering challenge
Between 2011 and 2014 two new high-pressure water barriers were constructed at Ibbenbüren Mine, RAG Anthrazit Ibbenbüren GmbH, to provide a long-term seal capable of resisting the ground movements expected as a result of the planned extraction of the Beustfeld panel. Two water stoppings had already been erected at the end of the 1970s for the hydrological separation of the western and eastern districts at a depth of about 300 m, the aim being to dam the water in the western district to about + 65 m. The two stoppings now had to be renewed, mainly to counter the influence of the approaching mine workings in the eastern district. The new water barriers with their special sealing segments were completed on time and without accident or incident in the summer of 2014. The two high-pressure dams were of a kind that had never before been constructed anywhere in the German coal industry.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Ralf Schmidt,
Ulrich Barth
Planning and excavation of a special-profile, deep- level face start-up road at Prosper-Haniel colliery
The deepening of number 10 shaft and an extensive programme of development work has given Prosper-Haniel colliery access to new reserves of coal on mine level 7, at a depth of 1,159 m. In order to extract the gas outburst-prone Zollverein 1/2 seam in the Prosper North district, where the coal is up to 4.65 m in thickness, it was necessary to purchase a new set of ‘category C’ shield supports. This paper, which is based on the author’s presentation to the Drilling and Shotfiring Colloquium held at Clausthal University on 24 January 2015, describes the requirements imposed on the face start-up roads, the planning and implementation work and the operational experience acquired in the course of the shotfired drivage phase.


Order now Mining Report Issue 02_2015 (including this topic)
Read article
Matthias Messer
Deep geological repositories in the UK: Current underground planning and competency requirements for waste packaging systems
Nuclear fission has been used for commercial electricity generation in the UK since 1956. This early (and world first) entry into the nuclear energy industry has created a huge challenge in the form of waste disposal and decommissioning, as many of the original facilities have left behind types of waste that by today’s standards are both abnormal and also poorly documented. The UK has already agreed on the concept of using deep geological formations for the permanent storage of this waste, and the material yet to be produced. However, the choice of site is still undecided. This paper outlines the main issues at stake and discusses the previous approach and future proposals for the construction of a permanent waste repository in the United Kingdom.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
François Chauvet
Cigéo: the French deep geological repository for ­radioactive waste – excavation techniques and tech­nologies tested in underground laboratory and forecasted for the future construction of the project
Cigéo is the French project for the repository of the high activity and intermediate long-lived radioactive waste. It will be situated at a depth of 500 m, in a clayish rock formation. An underground laboratory was built in the year 2000 and numerous tests are performed since 15 years, in order to know in detail the behavior of the rock and its ability to confine radioactive elements. In addition, this underground laboratory has brought and will continue to bring many lessons on the excavation methods to be chosen for the construction of Cigéo.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
Daniela Gutberlet
Can multi-criteria analysis models support the site selection for a repository for heat-generating waste?
The decision for or against a potential site for a nuclear waste repository is highly complex and requires decision-makers to consider multiple assessment criteria. The complexity of each site and its characteristics, and the differing opinions among members of the public and advocacy groups mean that conflicts of interest are likely to arise. In this paper, the author suggests that multi-criteria analysis models could be used to provide methodological support during the selection process. The models can map these types of decision situations and suggest coherent solutions with relatively little formal effort. They allow users to compare different options simultaneously and ensure that their decision-making is conscious rather than arbitrary.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
Kai Moeller,
Gerard Bruno
IAEA guidance on disposal and siting
The International Atomic Energy Agency (IAEA) with its Safety Standards provides requirements and guidance on all steps in radioactive waste management. This includes predisposal activities as well as disposal activities. Imperative requirements mainly are given in the IAEA publication “SSR-5, Safety Requirements on Disposal Radioactive Waste”. Currently in many member states siting is a topic of intensive controversial discussions. Whilst site characterization and site confirmation are addressed in this Safety Guides, site selection is not because it includes many aspects that are non-technical and specific to the societal context. In this article the existing guidance on siting is described and an overview on the most relevant existing documents on disposal is given.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
Ulrich Kleemann
The repository commission: a historic chance to solve an ongoing conflict
Germany’s Commission on the Disposal of High-level Radioactive Waste, which was set up in compliance with the country’s Repository Site Selection Act, has been tasked with drawing up criteria for a site selection process and evaluating the act by mid-2016. Lessons can be learned from the failed Asse and Gorleben repository projects, and the selection process should take these into account. Transparency and widespread public participation are crucial to reaching a broad consensus on the issue of permanent disposal. The commission must also produce a plan for avoiding and correcting errors during the selection process. Key elements of a selection process already exist or can be adapted to reflect the current state of the art with relatively little effort. Working from this basis, it should be possible to achieve a result that can end the ongoing conflict surrounding permanent disposal.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
ISSA Mining
Mobile hitching device attaches to rockbolts as an anti-fall personal protection system
Rockbolts are widely used for strata support in the salt and potash mining industries. Large numbers of such bolts are installed in the roof to prevent slabs of salt from breaking away and crashing down.

Many underground tasks have to be performed where there is a risk of falling. A newly developed mobile hitching device now means that for the first time the protruding ends of a mining rockbolt can be used as an attachment point for personal protection equipment (PPE) to prevent falling. The system comprises a mobile, re-usable anchor loop that can be screwed on to the rockbolt. As the rockbolts cannot be reached without some form of technical aid a special screw-on device was also developed for easy and reliable fitting from the roadway floor. The anchor loop is screwed on by hand and then tightened up as far as possible against the anchor nut. An indicator peg drops out to show that the anchor loop has been screwed home and is sufficiently secure. The rotating design of the loop prevents the device from becoming detached when in use. A telescopic rod is used to lift the snap hook on to the anchor loop so that the anti-fall PPE can then be attached.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
ISSA Mining
Magnetic protective caps for milling heads
Extremely sharp cutting heads are used when workpieces are machined in milling machines. There is a danger of lacerations and infections from cooling lubricants when the milling heads are installed/removed and during the measurement procedures.

The trainee Felix Röwekämper had the right idea to make working safer. He developed a new type of individually adapted protective caps for milling heads and an appropriate storage unit to store them in.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
Klaus-Jürgen Röhlig,
Peter Hocke,
Ulrich Smeddinck,
Clemens Walther
The ENTRIA Project: Selected Disciplinary and Interdisciplinary Research Topics
TGermany’s Commission on the Disposal of High-level Radioactive Waste, which was set up in compliance with the country’s Repository Site Selection Act, has been tasked with drawing up criteria for a site selection process and evaluating the act by mid-2016. Lessons can be learned from the failed Asse and Gorleben repository projects, and the selection process should take these into account. Transparency and widespread public participation are crucial to reaching a broad consensus on the issue of permanent disposal. The commission must also produce a plan for avoiding and correcting errors during the selection process. Key elements of a selection process already exist or can be adapted to reflect the current state of the art with relatively little effort. Working from this basis, it should be possible to achieve a result that can end the ongoing conflict surrounding permanent disposal.


Order now Mining Report Issue 03_2015 (including this topic)

Read article
Andreas Hucke,
Nadine Kohl,
Carsten Scior,
Daniela Gutberlet
Disposal facility building also is mining engineering – Germany can tap into this expertise and planning potential
The conventional mining industry has a rich tradition and as mining is practised all over the world under a whole range of different conditions the industry has witnessed all kinds of technical developments aimed at controlling strata behaviour and winning the target mineral as efficiently as possible. The proposed use of deep geological deposits as disposal facilities for nuclear waste has transformed the role of the mining industry and instead of extracting material from the ground mining engineers are now focussing more on how to store waste material safely deep below the earth’s surface. Nevertheless, this new remit retains many of the key aspects of conventional mining and the experience that the industry has built up over the years is still of vital importance when it comes to selecting a suitable disposal site and planning a final waste disposal facility in deep geological formations. These processes benefit from the support of specialists with a mining engineering background, as this can help to avoid unnecessary delays, additional costs and potential damage to public image. The following paper describes some of the expertises and methods developed by the conventional extraction industry that are also of relevance for the construction of disposal facilities.


Order now Mining Report Issue 03_2015 (including this topic)
Read article
Bruno Wiest
Canada’s Natural Resource Potential and Recent Developments
Innovation in Canada’s Mineral Development Model” was the theme of the 19th National Mining Week, which took place in Canada from May 11 to 15, 2015. The fact that a Mining Week is held demonstrates the important role mining plays in the lives of Canadians and the awareness for this sector in society. The theme reflects a trend as well as a commitment: to support the mining sector in its efforts to remain a global leader in minerals and metals, with innovation driving responsible and sustainable development of Canada’s natural resources, creating jobs and future prosperity. This article will present some of the main trends driving the development of Canada’s natural resources sector: Canada as a new supplier of strategic minerals such as rare earth elements; the expansion of exploration and mining efforts to the North and the Arctic; and the focus on innovation to meet technological and environmental challenges, including research to extend mining to depths greater than 2.5 km.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Peter von Hartlieb
The Potential of Southern African Mining Countries
Africa’s growing importance for the global economy is clearly visible in the increasing activities of companies from around the world. Countries such as France and the US have long been heavily represented in Africa, while others such as China, India and Brazil have been increasing their presence for more than a decade. German industry is also present, but is so far keeping a lower profile than in other world regions. Although German companies are well-equipped in many areas for success on the African market, they have so far avoided entering it. Yet numerous opportunities for German suppliers exist along the entire value-added chain, from exploration to processing. Opportunities particularly worthy of note are those in process optimisation, resource efficiency, technology development, modernisation measures for above and below ground, post mining, and education and further training.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Bernd Länger
The Australian Mining Supply Sector: Market Characteristics and Entry Strategies

Australia‘s mining industry has reached the end of its super-boom period. Price collapses in the resource sector, caused by an oversupply on the world market and a decline in demand from China, have put an end to a capital-intensive investment phase that lasted more than ten years. The industry has now entered a phase of short-term targets where the main focus is on plant and process optimisation, cost cutting, productivity improvements and greater cost and energy efficiency. With the mining industry seeing an increasing number of insolvencies affecting both operators and suppliers, the decision to enter the Australian mining supply market should now be given serious consideration. Because of country- and market-specific circumstances it is essential that any market entry strategy is adjusted and aligned to the product or type of services involved. With lead-times to the contract award phase typically amounting to several years in this sector, such ventures require flexibility, good planning and a realistic investment horizon that is funded over several years.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Michael Wiedicke,
Thomas Kuhn,
Carsten Rühlemann,
Annemiek Vink
Ulrich Schwarz-Schampera
Deep-sea Mining – a Future Source of Raw Materials?

The rising global demand for metals is starting to focus greater attention on the extraction of marine mineral resources (MMR) from deep sea. The term MMR essentially covers three different types of formation: manganese nodules, cobalt-rich ferromanganese crusts and massive sulphide deposits. All three of these natural resources provide the potential basis for a whole range of different metals. Germany has developed an interest for the exploration of marine deposits. This paper outlines the types of deep-sea deposits available and their resource potential. It also describes the legal and commercial parameters involved and presents the challenges that will arise during the mining and extraction phase and the possible environmental impact of such operations.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Daniel Schäfer
Value Stream Analysis of the Production Flow in the Zinkgruvan Mine

The Zinkgruvan Mine is Sweden’s southernmost mine located approximately 200 km south-west of Stockholm at the northern end of lake Vättern. The primary metal is zinc, secondary metals are lead, copper and silver. The Zinkgruvan Mining AB plans a 20 % increase of processed ore until 2022. This article examines the production processes and performs a value stream analysis of the production flow. The focus deals with implementing an Overall Equipment Effectiveness measurement and the simulation of the haulage capacity. The article is a conclusion of the author´s graduation paper at the Rheinisch-Westfälische Technische Hochschule (RWTH) Aachen. For his excellent examination he got the Helmuth-Burckhardt-Award by Vereinigung Rohstoffe und Bergbau (VRB), Berlin, in September 2014.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Uwe Maaßen,
Hans-Wilhelm Schiffer
Germany’s Lignite Industry in 2014

From 2013 to 2014, Germany’s domestic lignite output dropped 2.6 % from 183.0 Mt to 178.2 Mt. The 2014 figure is equivalent to a net calorific value of 55.2 Mtce. Of the total output, 159.1 Mt, or some 89 %, was used in utility power plants for the public supply, i.e. 3.0 % less than in the previous year. In addition, 15.0 Mt was input in the factories of the lignite-mining industry to make solid products, while 2.1  Mt was used to generate electricity in mine-mouth power plants. Other sales of raw lignite and changes in stocks accounted for 2.0 Mt. Lignite made a 25.4 % contribution towards Germany’s total power generation in 2014.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Helmut Ehnes
ISSA Mining
Cooperation to Improve Health and Safety in the Turkish Mining Industry

The Turkish Ministry of Mines, Raw Materials and Energy, the International Social Security Association (ISSA) in Geneva and the International Section of the ISSA for Safety and Health in Mining (ISSA Mining) signed a Memorandum of Understanding in Ankara, agreeing to cooperate closely to improve occupational safety in the Turkish mining industry.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Wolfgang Babeck
Legal Survival Strategies in Anglo-Saxon Countries Exemplified by Mining Projects in Australia

Australia is one of the biggest mining countries in the world. In spite of the current recession, the mining industry has continuously grown throughout the past decades. This predictable continuing development in the upcoming decades can undoubtedly be traced back to Australia’s vast and often unexploited landmasses. The country possesses about 10 % of the world’s known coal deposits. It further harbors great amounts of iron ore, bauxite and copper. Australia plays an important role in the global supply of raw materials. Many German companies are toying with the idea of entering Australia’s large and attractive market that is characterised by gigantic and continuously growing reserves and compels due to the possibility of outstanding revenues. Yet, how is it possible to minimize the risk and the expenditure for expansive contracts, exorbitant procedures and elaborate rules governing compliance? This article will provide answers to these questions. It is mainly based on a lecture held by the author at the Australian embassy in Berlin on the 25th of March 2015 entitled “The Future of Mining in Australia. Technology. Innovation. Sustainability. Finance.”


Order now Mining Report Issue 04_2015 (including this topic)
Read article
Volker Osterholt
Making an Exploration Investment Case

Exploration expenditure is closely linked to commodity prices and in the current low commodity price environment pressure on exploration budgets and reduction in spending has been dramatic. This calls for making robust business cases for exploration spending to demonstrate value-added to senior management. This contribution examines exploration and related resource definition in the context of the mine production value chain which is conceptualized by means of Theory of Contraints. This framework allows to link uncertainty around the deposit being mined with production costs and hence deriving a value to improved resource definition. A demonstration study in a bulk commodity shows the application of the framework with impressive cost savings and return on capital achievable, supporting a business case for considerable resource definition spending. The Value of Information concept is introduced to help establishing upper bounds for expenditure on a project.


Order now Mining Report Issue 04_2015 (including this topic)
Read article
ISSA Mining
Joachim Löchte,
Bernd Langhanki
Zero Accidents and 100 % Value Added. Utopian – Challenging – Natch?

Occupational health and safety and process efficiency are outstanding action items in coal mining. At first glance, the goals like risk minimization for the employees and steadily rising productivity, seem to stand in opposition to each other, specifically taking into account the potentially higher risk in underground mining. History shows that different approaches, i.e. various management systems have been used to achieve these goals. Experiences in recent years show that an integrated, systemic approach with close interaction provides even greater efficiency and effectiveness in both areas. Zero accidents and waste-free processes, representing 100 % added value, are no longer an utopia but targets that can be considered as realistic. Six factors play the main role for success, which will be achieved with altered behavior and mind-set of the staff and the management, in connection with a profound change in corporate culture.

The paper is based on the authors’ presentation on the Aachen International Mining Symposium (AIMS) at 27th May 2015.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
George Barakos,
Helmut Mischo
Setting the REE Industry-Specific Criteria and their Significant Role in the Viability of Rare Earth Underground Mining Projects

To evaluate the feasibility of a future underground mining operation is a complex problem in itself, with several different parameters to be accounted for and evaluated to secure investment decisions over the viability of any potential underground mining project. This procedure gets even more complicated when it comes to exploiting rare earth deposits. Various concerns are expressed regarding the environmental impacts that an underground mining operation may cause due to the radioactivity of the rare earth elements during mining and in waste treatment. Furthermore, the fragile market and the diversified supply and demand of the different rare earth elements can significantly affect the viability of such a venture, among other factors. This paper deals with the definition and classification of the specific criteria that govern the REE mining industry. Moreover, a thorough investigation is made of how these criteria can determine not only the selection of the underground mining method to be applied, but also of the impact that they may have to the overall feasibility of any given potential project.

This paper was presented by George Barakos at the conference of the Society of Mining Professors (SOMP) on 24th June 2015 at the TU Bergakademie Freiberg, Germany.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
Mark Becker,
Philipp Martin,
Martin Junker,
Intelligent Face Systems with a Direct Link to the Mine Control Room Provide New Technology for the International Coal Industry

This paper discusses the intelligent interaction of the key systems that make up a longwall mining installation. The high level of automation that can be achieved with an interlinked system is the key to greater efficiency, by way of energy and resource savings, and a significant improvement in workplace safety. The involvement of operator know-how is the essential element in developing solutions for intelligent face systems. RAG Mining Solutions GmbH, Herne/Germany, has been working closely with RAG Deutsche Steinkohle, Herne/Germany, to develop a software solution for the interaction of the main operating systems that go to make up a longwall face installation. This paper uses practical examples to describe how operators have helped shape the development process, resulting in promising new technology for the international coal industry. It also explains how the chosen software solution is connected to the downstream control-room systems. It is based on the second author´s presentation on the Aachen International Mining Symposium at 28th May 2015.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
Heinrich Höhl
New Teeth for Chain Conveyor – Innovative new Sprocket Reducing Costs and Increasing Efficiency

In 2012 Halbach & Braun Industrieanlagen GmbH & Co. in Hattingen/Germany, which has almost 100 years experience in the design and manufacturing of chain conveyors, made an innovative step to improve the exchange of worn sprockets by changing only teeth bars instead of complete sprockets. This new design was successfully tested on a mine in China, proving advantages in handling and efficiency.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
Andreas Merchiers,
Gregor Brudek,
Markus Dammers
Advantages and Applications of Rail Haulage Systems in Underground Hard Rock Mining Operations

In the past twenty years, substantial efforts have been made to introduce improvements to rail haulage systems and to catch up with the advantages of the other methods of haulage and conveyance in underground hard rock mining operations. Modern high performance rail haulage systems eliminate the historical disadvantages and have been able to take over the ‘number-one’ position with regard to productivity, reliability, servicing and maintenance. Together with the global trend of going underground using bulk mining methods within hard rock mining this leads to an increasing usage of rail haulage systems.
With regard to the choice of the most suitable haulage system it is necessary to analyze the advantages and disadvantages dependent on defined background conditions as well as to assess their economic influences and their ‘weighting’ within the overall context of mining operations. Therefore, an evaluation tool has been developed to identify the cost drivers of the various haulage systems through which especially the advantages but also the reduction of possible disadvantages of rail haulage for underground mining operation can be made transparent.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
Kai van de Loo
BGR Energy Study 2014 – Observations from a Coal-Industry Perspective

In December 2014 the Federal Institute for Geo-Sciences and Raw Materials (BGR) presented its new ‘Energy Study 2014’ that takes stock of ‘reserves, resources and the availability of energy supplies’ at national and global level in 2013. In publishing the study the BGR hopes to contribute to the public debate on Germany’s current and future energy supply situation by providing specialist information from its area of competence and in so doing to offer resource-specific advice to German industry and to the Federal Ministry of Economics and Energy (BMWi), a body that plays such a key role in this field. In the following paper the author examines the BGR Energy Study from the perspective of the German coal industry.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
Christoph Dauber,
Hans Georg Blasgude
FABERG – 93 Years of Mining Industry Standards

FABERG, the Herne-based mining standards committee, is part of the German Institute for Standardisation (DIN) in Berlin. As a joint institution of the German mining industry FABERG is supported by the Berlin-based VRB (German Association for Raw Materials and Mining) and in terms of its organisation and staff is affiliated to the Deutsche Montan Technologie (DMT) for Mining, Energy and the Environment. FABERG is responsible for national standardisation in the field of mining and also acts as a representative on European and international standardisation committees. It supports the introduction into all relevant areas of those German standards that are part of its specialised field. It has now been decided that FABERG will be disbanded at the end of 2015, some 93 years after its foundation in 1922. More than enough reason to look back on and take stock of its achievements.


Order now Mining Report Issue 05_2015 (including this topic)
Read article
Franz-Josef Wodopia,
Michael Weberink
Coal 2015 – Acting Responsibility. Creating new Perspectives.

In November 2015 the German Hard Coal Association (GVSt) in Herne, Germany, presented its annual report titled “Coal 2015 – Acting responsibly. Creating new perspectives.” The report outlines all kinds of ways in which the coal industry is already readying itself to deal responsibly with the post-mining era. Additionally it presents the current situation of the German coal industry and discusses the national and international background conditions also including the newest working, social and tariff regulations. Moreover it includes a review of the international commodity markets and an analysis of energy and climate policy. The report can also be downloaded from the GVSt website: www.gvst.de


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Friedrich-Carl Benthaus,
Oliver Totsche
The Groundwater Raise in Lignite Mining Induced Areas in Lusetia – Actions taken to reduce the Follows Ups

While mining of lignite in opencast ceased in Lausitz and Leipzig area, groundwater level raises fast. Housing areas and roads partly were erected without considering former ground water levels. In the drained soil strata, pyrite oxidized and formed vast quantities of iron hydroxide and sulphate. These substances are now carried out into nearby water courses. Investigations show some areas endangered from groundwater raise. Water quality problems occur along rivers and creeks due to inflowing iron hydroxide and sulphate. The Lausitzer and Mitteldeutsche Bergbau-Verwaltungsgesellschaft mbH (LMBV), Senftenberg/Germany, developed dewatering wells as well as draining systems in order to lower water table. Innovative concepts were developed to reduce occurrence of ochre. This requires cleaning up the river course as well as running settling ponds along the streams. At hot spot areas the iron rich groundwater will be collected by drains and filtering wells. In the medium term the iron load of the ground waters will be reduced before entering the streams. Iron reduction by enhancing bacteria activities is a challenging approach. The economic reuse of the iron hydroxide is to be investigated.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Michael Paul,
Jürgen Meyer,
Ulf Jenk,
Andrea Kassahun,
Andrea Schramm,
Delf Baacke,
Norbert Forbrig,
Thomas Metschies
Water Management – a Core Task of the Wismut Remediation Programme

Water management and conventional technical water treatment are by far the most cost-intensive long-term tasks of the Wismut remediation programme. Over the medium term, there is no viable alternative to the operation of active systems to catch and treat contaminated mine waters at the Ronneburg, Schlema, Königstein, Pöhla, Seelingstädt and Helmsdorf sites. Based on the status quo this paper outlines the key issues of the Wismut GmbH water management strategy over the medium and long term. It is focused primarily on achieving protection goals for potentially impacted water bodies in the surroundings of Wismut sites and on optimising associated remediation expenditure as well as on creating the prerequisites for achieving low post-remedial care and maintenance or walk-away system status over the long term.

The topic of this paper is the presentation of priority tasks related to future water management at Wismut sites in Saxony and Thuringia. The reflections are based on experiences and lessons learned and take into account current statutory management requirements referring to ground and surface water bodies affected by Wismut. The paper is based on a presentation made at the International Mining Symposium WISSYM 2015 on 2nd September 2015 in Bad Schlema, Germany.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Karl-Heinz Brandt,
Wolfgang Kühn,
Emanuel Grün,
Hans-Willi Jakobs
Water Authorities in Structural Transformation in the Rhenish-Westphalian Industrial Belt – a (new) Perspective with the Decline of the Mining Industry

The water authorities of the Rhenish-Westphalian industrial belt, namely the Emscher and Lippe river management associations and the Lower-Rhine catchment area authority, have been responsible for managing the water resources of the region as a public service for over 100 years (Figure 1). The impact of the mining industry has been such that local water resources have had to be adapted on a continuous basis and it was these measures that first made the industrial and commercial development of the region possible. The functional aspects of the waste-water disposal and purification systems and flood protection measures also played a decisive role.

The northwards migration of coal mining has created a huge potential for the development of the region and the opportunities that this now affords have been further increased with the prospects of a cessation of all mining activities. Water management systems can be transformed and new schemes put into place, new habitats can be developed for man, nature and the environment. These changes also reflect the social transformation that is under way from a sustainability point of view. A holistic approach to the natural water cycle, supported by the technical innovations and established management structures operated by modern companies, can serve as a model for tackling other large-scale problems and issues caught in the crossfire between mining and water management, and may even apply on a global scale too.

In the Ruhr coalfield this conflict zone is still there, for the mining industry and its impact have not disappeared. While keeping a close watch on the remaining hazards, and on any threats that may emerge in the future, the bodies responsible also need to recognise, develop and exploit the potential that is there.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Bernd Lottermoser
Predicting Acid Mine Drainage: Past, Present, Future

Total worldwide liability associated current and future remediation of acid mine drainage (AMD) is approximately 100,000 million US-$. Consequences of failing to predict AMD for individual operations and for the mining industry include unplanned spending on remedial measures and reputational damage. Despite these severe risks, predicting AMD properties of mine wastes is typically not an attribute that is strongly embedded into the development of mineral resources. While the research community needs to establish practical state-of-the-art AMD characterisation tools, industry has to accept and use such tools, if we are to achieve more cost-effective mine closure and reduce environmental liabilities in the long term. In future, AMD predictive tests and methodologies should rely on integrated field and laboratory tools measuring mineralogical, geochemical, textural and geometallurgical properties. Such an approach supports more effective waste management during operation and ultimately leads to less costly mine closure outcomes. The paper is based on the author´s presentation on the Aachen International Mining Symposium (AIMS) at 27th May 2015.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Christian Melchers,
Peter Goerke-Mallet,
Laura Henkel,
Wilhelm G. Coldewey,
Dominik Wesche
Density Stratification in Mine Water Bodies as a Contribution to Better Long-Term Water Management

In flooded shafts of the Ruhr-area distinct boundaries between differently mineralised water bodies have been observed at diverse locations. The influx of higher mineralised water from the rock mass and from the mine workings on the one hand and the penetrating less mineralised surface water on the other hand causes significant density differences in the water column. The formation of a stable stratification can be proven by measurements of temperature and conductivity. These measurements confirm that columns of water in flooded shafts display stratification with distinct boundaries between individual, homogeneous layers. The stable conditions are driven by convection currents which generate from the influx of higher tempered and mineralised mine water. Therefore, the observed density stratification can be considered as the result of a complex flow pattern which is governed by the mineralisation and temperature of the water in the shaft. The phenomenon of density stratification is an important criterion in the flooding of existing mine facilities after mine closure and requires further research. The formation conditions of natural density stratification are based on thermodynamic processes. The paper is based on a presentation made at the International Mining Symposium WISSYM 2015 on 2nd September 2015 in Bad Schlema, Germany.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Christian Melchers,
Peter Goerke-Mallet
Research Institute of Post-Mining, TFH Georg Agricola University of Applied Sciences, Bochum – Strategies, Activities and Research Priorities

In the Federal Republic of Germany the hard coal production will be phased out by the end of 2018. The abandonment of the coal mining industry triggers a crucial structural change in the former mining regions which has to be planned and shaped actively. In order to come up with the challenges, risks and chances of post-mining, the TFH Georg Agricola University of Applied Sciences, Bochum, Germany, established a new master program for post-mining which is unique in the world. In addition, the Research Institute of Post-Mining is founded. It investigates possible solutions for central issues in coping with the perpetual obligations. A major task of the Research Institute is to maintain and pass on the mining-based know-how. The establishment of the Master course and the Research Institute is specifically promoted by the RAG-Foundation, Essen, Germany. This includes the foundation of an endowed chair.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Gerd Grabow
250 Years of the Bergakademie Freiberg, the World’s Oldest Mining University

Throughout its long history, the Bergakademie Freiberg has played an important role in the mining sciences and was a major driving force in the development of the geosciences and the natural and engineering sciences. Its high-level scientific education attracted students from all over the world. Among the most famous to enrol were Alexander von Humboldt (1769 – 1859) and Georg Philipp Friedrich von Hardenberg (1772 – 1801), or Novalis as he was known. The Bergakademie Freiberg’s reputation benefited from the presence of renowned scientists who either taught or studied there, such as Abraham Gottlob Werner (1749 – 1817), Clemens Winkler (1839 – 1904), Ferdinand Reich (1799 – 1882) and Hieronymus Theodor Richter (1828 – 1898). The list also includes Julius Ludwig Weisbach (1806 – 1871), a polymath and pioneer of modern engineering in fields such as mining machines and mine surveying; Gustav Anton Zeuner (1828 – 1907), a talented organiser in introducing new scientific structures and study content to higher education; and Erich Rammler (1901 – 1986), who developed the world’s first high-temperature process for producing metallurgical coke from lignite.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Jürgen Kroker
Auguste Victoria Colliery – a Reliable Partner through the Years

Auguste Victoria colliery in Marl will cease production on 31th December 2015. The town of Marl owes its origins to the mine and coal mining, along with the chemical industry, has been a major factor in the economic development of the local community and region right up to the present day. The author traces the history and technical developments of the colliery and previews the structural changes that will be needed to prepare former colliery sites, and that of Auguste Victoria in particular, for future use.


Order now Mining Report Issue 06_2015 (including this topic)
Read article
Terrie Romano
Potentials of the Mining Region “Ring of Fire” in the Province of Ontario

Canada is the second largest country in the world and one of the most important raw material suppliers worldwide. The country’s diverse natural resources include energy sources such as oil and gas, as well as many agricultural commodities, in addition to mineral deposits. Therefore mining has a long tradition in Canada. The province of Ontario, which is the motor of the country’s economy and is bordered to the north by Hudson’s Bay and to the south by the Great Lakes, is also a center for the mining industry.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Peter v. Hartlieb
Current Developments in the Russian Mining Industry

The Russian economy is set to shrink by 3.5 to 4.0 % in 2015 and this recession is expected to continue through 2016. Oil prices are now at an all-time low and are predicted to remain so for the time being. The conflict in eastern Ukraine has flamed up again and this makes any lifting of Western sanctions unlikely. The prospects for economic recovery in Russia therefore remain poor. Yet while Moscow seems to be intent on forcing an upturn in the fortunes of the coal industry, there were by the end of 2015 clear warning signs for the government. Russian coal exports were on the decline throughout the year and imports of coal to China, including those from Russia, were dramatically cut back, while renewables based electricity is growing in popularity, even in Russia. Despite all this the Russian Government remains resolved to invest heavily in expanding coal production and to subsidise the building of power stations along with the coal export sector.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Peter v. Hartlieb,
Ulrich Ruppel,
Dirk Wagner
Coal Mining in Turkey

Over the past ten years, thanks to billions in loans from the International Monetary Fund, a consistent policy of austerity, and strict spending discipline, Turkey has managed to avoid national bankruptcy and has experienced an economic boom with growth of up to 9 %. A stable political situation, economic reforms, low wages and the privatisation of most state-owned companies have been attracting Turkish and international investors for a decade. Protests against the government’s hard line did cost the country points in terms of its global reputation and in the economy, but they did not raise any prolonged doubts among investors regarding Turkey’s political stability. In addition to China, Turkey is one of the most important future markets for German manufacturers of mining machines and for German mining consultancy firms. This paper provides an overview of the status and outlook for mining activities in Turkey, and pays particular attention to the production of coal for Turkey’s energy supply.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Rebecca Schmücking
Mining in Mongolia – Everything is Possible

In 2011 Mongolia experienced an economic boom with growth recorded at 17.5 % (1). This was triggered by the start of the first phase of the Oyu Tolgoi (OT) project that involved investments totalling 6.6 bn US$ (2). The International Monetary Fund (IMF) believes that Mongolia has natural resources worth between 1,000 and 3,000 bn US$ (3), including the world’s second-largest reserves of copper. Mongolia is therefore one of the most resource-rich countries on the planet (4), having as it does plentiful supplies of gold, copper, coal, molybdenum, fluorite, tin and uranium.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Tim Langenbach
Financing of International Mining Projects

As an industrial nation, Germany is obliged to safeguard its supplies of natural resources by obtaining a number of different raw materials that are not available, or cannot be supplied in sufficient quantities, on the domestic market. From a German perspective the development of overseas mineral deposits therefore plays a vital role when it comes to externally sourced commodities, and particularly energy resources, metals and/or metal ores and a number of industrial minerals. Although there are just a few German companies currently engaged directly in their own foreign mining operations, including AMG Mining AG (Graphit Kropfmühl), Cronimet Mining AG and K+S AG, it would not be possible to develop new mineral deposits without some form of financial backing. This applies equally to projects that contribute indirectly to the supply of raw materials through intermediaries or purchasing agreements.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Ulrich Schmitz,
Dr. Hans-Hermann Hunfeld
Measuring and Dosing System for Operating Fluids Used in Longwall Hydraulic Systems for the Economic Optimisation of Shield Supports

The fall in prices for thermal and coking coal experienced for a long time now has forced all hard coal mines worldwide to resort to a special economy drive. A considerable part of their costs are caused by the operation of shield supports. The economic efficiency of the latter does not only depend on low acquisition costs, though. Other essential factors are maintenance costs and repair costs incurred within the useful life of the shield support. Besides mechanical damage to shield supports, corrosion damage within the hydraulic system is one on the biggest cost drivers. This does not only require an enormous expenditure of money due to repairs and possible production downtime but may in the worst case also endanger lives.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Holger Lieberwirth
Redefining Deposit’s Reserves by Advanced Mineral Processing Approaches

The estimation of a deposit’s reserves depends on the geological and mineralogical characteristics as well as the market value of the product. It is also influenced by the mining and mineral processing technology applied and the respective costs generated. Ongoing challenges such as decreasing prices, lower grade ores, rising labour and equipment costs call for new approaches. This paper highlights some of those in the processing of ores such as selective comminution or confined particle-bed breakage which might lead to increased recovery and reduced costs. Those advanced mineral processing approaches are based on in-depth knowledge of the comminution behaviour of the ores. Such knowledge is gained through investigation of the minerals using Mineral Liberation Analyser or Quantitative Microstructural Analysis. The option of recovering even low grade ores economically using advanced mineral processing technologies may finally lead to a re-evaluation of the reserves of deposits. The paper is based on the author´s presentation on the 26th Annual General Meeting and Conference SOMP 2015 at 24th June 2015 in Freiberg/Germany.


Order now Mining Report Issue 01_2016 (including this topic)
Read article
Jürgen Kretschmann,
Stephan Düppe
Future since 1816: Celebrating 200 Years University of Applied Sciences TFH Georg Agricola

In 15 April 2016 the University of Applied Sciences TFH Georg Agricola is celebrating its bicentennial of existence. On this very day in 1816 the first fourteen students commenced their studies at what was then the Bochum Mining School from which, after quite a few transformations, TFH Georg Agricola eventually emerged. It is the oldest still existing institute of education for hard-coal mining in the Ruhr-area and enjoys the longest tradition of all universities in our region. Our anniversary year also sees us pursuing a new direction under the heading: “Future since 1816”.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Martin Wedig
Developments of the International Mineral Markets Considering the Chances of German Mining and Conveying Technology

Following-up with recent press news it becomes obvious that the international mining industry is in deep crisis latest since 2014. This was initiated by lesser demand from China which in-turn is well known for setting records over the past but calmed down their mineral consumption and own mining activities as well as. In consequence there is a larger impact to the international mining markets and to the mining equipment companies offering their products for the international mining markets. The question is how deep the effect on the mining equipment technology provider will be today and in the future. The following contribution is based on the presentation held by the author to opening up the 7th colloquium on ”conveying technology in mining” at Technical University (TU) of Clausthal on 20th January 2016 in Clausthal-Zellerfeld/Germany.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Kai van de Loo,
Andreas-Peter Sitte
The German Coal Situation 2015

Following a lengthy period of almost unbroken growth the coal market was seen to undergo a slight contraction in 2015. World market prices continued to fall and in some cases reached an all-time low. In Germany there was only a slight downturn in coal consumption, which was mainly due to a period of temporary stability in supplies to the electricity production sector, though the general trend here is still downwards. The German mining industry, where the phasing-out process is still under way under socially acceptable terms, reached another key milestone with the scheduled closure of Auguste Victoria colliery at the end of 2015. Germany is now left with just two operational coal mines and the industry is now forging ahead with its plans for the post-mining era.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Karl-Heinz Wennmohs
Underground Loading and Transport Systems and the Challenges Posed by Increased Production Levels at Ore Mines around the World

Developments in production levels at ore mines as a result of the transition from large opencast mines to deep mining have forced mine operators and machinery manufacturers towards greater modernisation and innovation, especially when it comes to methods and technology for ore loading and transport. Large-scale opencast mines producing copper ore, such as Grasberg and Chuquicamata, employ modern, highly efficient surface mining techniques. However, as Chuquicamata and other large mines have shown, this kind of technology tends to reach its limits at working depths of more than 1,000 m and as a result any further extraction can only be carried out cost effectively by switching to deep mining methods. There are also examples where deposits at existing mines have been developed to achieve production rates similar to those of opencast operations, such as at the LKAB-owned Kiruna mine in Sweden.
The loading and haulage machines that have become standard equipment in opencast mines cannot be transferred directly for use under deep mining conditions because of their dimensions. However, as the profitability of underground production operations is calculated on the basis of almost identical output planning, even allowing for the reduced metal content of the ore, new loading and haulage systems are needed to handle the production volumes – not least because of the ever increasing safety demands and the type of operating conditions being encountered.
This paper is based on a presentation given by the author at the 7th colloquium “Transport and conveying in the mining industry”, which was held at Clausthal University of Technology in Clausthal-Zellerfeld/Germany, on 20th January 2016.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Günther Philipp,
Alexander Gerth
Assessing the Corrosion Risk to Coal-Face Chains

Coal winning is now generally associated with the mechanised longwall face system. Data on the actual number of such production units is currently only available for a few countries, though recent estimates have suggested that there are about 2,000 longwall faces in operation at collieries around the world, with about three quarters of these to be found in the Peoples Republic of China (1). This paper will seek to focus on longwall operations of this kind.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Elisabeth Clausen,
Amit Agasty
Using a Hierarchical Approach for the Dilution of Gases

In order to ensure safe underground working conditions, especially in case of gas outbursts, it is essential to develop ventilation concepts for the necessary dilution of harmful gases with respect to the occurring gases, gas concentrations and general operational conditions as to cross-sectional areas and existing ventilation systems. Therefore, a concept for a hierarchical approach for the dilution of gases was developed, combining Computational Fluid Dynamics (CFD) and Ventilation Network modeling. For the two-phase gas/air flow that occurs during a gas burst, a CFD simulation was performed and the behavior of the gas burst and its impact on the existing ventilation were analysed. Based on the simulation, various measures for the dilution of air dependent upon the severity of the gas burst as well as the geometrical conditions were tested and evaluated according to their efficiency. An integration of the simulation results into the existing superior ventilation network calculations was then performed with the Mine Ventilation Simulation Software VentsimTM, a tool that provides compressible ventilation system calculations and is capable of delivering the requirements for the development of quick, effective and safe ventilation concepts.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Viktor Semenovich Zykov,
Hee Un Lee
About Possibilities to Improve Current Outburst Hazard Prediction Based on Updated Mechanism of Coal and Gas Outburst

In this paper the problem of coal and gas outburst – the coal pit’s most complex and dangerous induced geodynamic phenomenon – occurrence and development has been considered in details. Based on the theoretical and experimental researches it has been shown that this phenomenon may occur in full strength only with sufficient quantity of total potential energy available in the massif’s face area together with the conditions required for development of each stage of the phenomenon. However, the main condition shall be occurrence and development of the intensive opening and extension of cracks quasiparallel to the seam’s exposed surface and saturation of these cracks with pressurised free gas in the face area.
Updating of the coal and gas outburst process allows to improve current prediction of the mine opening hazards with respect to the coal and gas outbursts.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Peter Goerke-Mallet,
Frank Mersmann,
Thorsten Beermann,
Max Thomas Stöttner
Optimizing Long-term Mine Water Management of Mining Sites with the Help of Directional Drilling and Liner Technology

The exploitation of raw materials in opencast or subsurface mining is usually followed by an impact on the water balance. To guarantee a secure and efficient production process the water must be drained. The environment-friendly mine water management should be implemented during the active mining as well as in the post-mining phase. Moreover, abandoned mine sites are often marked by unsolved hydrogeological questions.
This article deals with a number of options to optimize the mine and geothermal water management on the basis of liner technology. This proven technology can be adapted on the specific hydrochemistry, on the construction form and the conditions of the given infrastructure. Also in combination with directional drilling and horizontal or inclined bore holes, the liner technology can be used.
From the authors´ point of view, the mine water management in active and abandoned mine sites lend itself to implementing interesting approaches for using hose liners. The currently available technology for the drilling of long horizontal bore holes can support the synergetic effect. This contribution should also give suggestions for the improvement of a secured planning of new mining projects.


Order now Mining Report Issue 02_2016 (including this topic)
Read article
Friedrich Wilhelm Wagner,
Andreas Welz,
Ulrich Hoppe
The NRW Mines Inspectorate Approach to the Hazards Posed by Abandoned Mines

North Rhine-Westphalia can look back at a long tradition of mining and there is even verifiable evidence of mining activities dating back to the 13th century. The economic development of some regions – including the Ruhr, Siegerland, Aachen and the Oberbergish Land – is closely associated with the mining industry. The natural resources of North Rhine-Westphalia have been worked for many generations and include lignite, coal, rock salt, slate and various metal ores. The legacies of the mining industry still have damage relevance to this day and the dangers posed by abandoned mines can extend right up to the surface. This paper describes the measures being taken by Arnsberg District Government to develop a risk management strategy for the abandoned mines of North Rhine-Westphalia.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
Christian Melchers,
Peter Goerke-Mallet,
Karl Kleineberg
Elements and Aspects of the Post-Mining Era

The subsidised German coal industry will cease to exist on 31.12.2018. The post-mining era will then set in, not just in the coalfields of North Rhine-Westphalia and Saarland, but in many other German mining regions too, where it has already been a reality for some time. The elements and aspects of the post-mining age will mean a permanent weighing-up of opportunities and risks, and this is a task that will also face coming generations. The post-mining era will be a time for risk prevention, restoration and the re-development of former mining sites. Two of the key challenges will be to protect and secure surface structures and to manage mine-water flow. Specially developed monitoring systems will play a vital role here, while in terms of land recycling and conversion the focus will be on drawing up plans for attracting and establishing new businesses, developing renewable-energy production facilities, ecological upgrading and promoting tourism and cultural attractions.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
Stefan Hager,
Peter Frank Wollnik
Mine Surveying and Post-Mining Activities of RAG Aktiengesellschaft

RAG Aktiengesellschaft, Herne/Germany, owns the last two coal mines in Germany: the mine Prosper-Haniel in Bottrop and the Mine in Ibbenbüren. At the end of 2018 the production of hard coal will be finished. But even then the RAG Aktiengesellschaft remains responsible for the consequences caused by the coal industry. The area of responsibility will include settling of mining damage and the handling of closed mines among others. RAG Aktiengesellschaft is intensively dealing with this matter, bears the responsibility and takes action. This article demonstrates how the risks of historical mine building and former surface openings are consequently met in the post-mining sector. The majority of these risks date from long before the foundation of RAG Aktiengesellschaft. Important elements are a well-functioning risk management system, an optimized monitoring system and preventive exploration and remediation measures which are state of the art.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
Jasmin Korbmacher
Residual Lakes in the Rhineland Lignite Area

The lignite mining area of the Rhineland/Germany is bounded by the three cities of Dusseldorf, Cologne and Aachen. Lignite has been mined in this locality since the 18th century and the three opencast mines currently in operation, namely Inden, Hambach and Garzweiler, produce between 90 and 100 mt of fuel a year. About 85 % of the annual production is used for electricity generation, with the remaining 15 % being delivered to processing plants. The following paper sums up the authorisation and approval status of Rhineland’s three remaining opencast lignite mines in terms of their future land-use and development.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
Michael Mackenbach,
Nikolaus Linder
Investigation, Securing and Remediation of the Former Coal Mine Vihovići in Mostar, Bosnia-Herzegovina

The City of Mostar is located in the South of Bosnia and Herzegovina. In the West and in the North of the city, lignite was exploited in underground mining in the suburban municipalities Ilići, Cim, Vihovići and Raštani since the mid of the 19th century. In Vihovići, lignite was also mined in open pit. Since the 1980ies, large parts of the exploitation area were overbuilt by expanding residential areas.

The lignite was sedimented in a basin formation with maximum five seams. Each seam shows a thickness of up to 20 m. The seams are embedded in a carbonate rock sequence consisting of limestone and clay with a thickness of about 240 m interbedded with sandstone banks. Due to tectonic conditions, the overburden of the seams in the area of the former open pit mining varies from 20 to 80 m.

Between 1919 and 1992, more than 11 mt of high quality coal were mined, 3.5 mt thereof from the open pit mine in Vihovići. The open pit extended to an area of approximately 120 ha and was partly used as a waste deposit site by the City of Mostar from 1991 to 1998. Now there is a remaining pit of approximately 20 to 35 ha and a maximum depth of approximately 75 m, partly filled with water.

In 2006, the necessity of a sealing of the landfill surface was assessed. Drillings revealed a self-ignition of the underground coal in the north of the remaining open pit. In the framework of the underground coal fire extinguishing works, 68 drillings were sunk. In total, approximately 58,000 m3 of water, 3,250 t of fly ash and 436 m3 sand were pumped into the underground.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
Rüdiger Schwarz,
Dennis Bastian,
Rebecca Reiche
The Project ''Sustainable Site Development of the Mining Region Erdenet, Mongolia’’

The project “Sustainable site development of the mining region Erdenet, Mongolia” was commenced in spring, 2014 by the partners and project sponsors the government of the province of Orkhon and mayor of the city of Erdenet, the management of the Erdenet Mining Corporation (EMC) and the management of the Berlin-based mining consulting company geotec Rohstoffe GmbH.

The overall objective of the project is defined as follows: Development and implementation of a program of measures for the ecological rehabilitation and economic re-valorization of the mining region Erdenet. From the very beginning the guiding principle was to develop the project “Sustainable site development of the mining region Erdenet, Mongolia” as a pilot project for Mongolia as well as to develop the project under the bilateral cooperation between Germany and Mongolia.

This publication describes the objectives and the background of the project and summarizes the status of the overall project as well as the various subprojects.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
Uwe Maaßen,
Hans-Wilhelm Schiffer
The German Lignite Industry in 2015>

Germany’s domestic lignite output decreased by 0.1 % from 178.2 mt to 178.1 mt between 2014 and 2015. 2015’s extracted lignite had a net calorific value of 54.9 mtce. 159.3 mt, or almost 90 %, of that output were used in utility power plants supplying the general public. This translates into an increase of 0.2 % compared to the previous year. 14.9 mt were used in the factories of the lignite mining industry for the manufacture of solid products. 2.0 mt were used to generate electricity in mine-mouth power plants. 1.9 mt accounted for other sales of raw lignite and changes in stocks. Lignite’s contribution to Germany’s total electricity production amounted to 23.8 % in 2015.


Order now Mining Report Issue 03_2016 (including this topic)
Read article
AHK Canada,
AHK Chile,
AHK Australia,
AHK Southern Africa,
DERA
The German Mining Network – International Mining and Raw Materials Expertise for German Businesses

The German Mining Network is a platform of mining and raw materials experts that comprises the German Mineral Resources Agency (DERA) in the Federal Institute for Geosciences and Raw Materials (BGR), Germany Trade and Invest (GTAI) and six international competence centres affiliated to each of the bilateral Chambers of Commerce (AHK) in Australia, Brazil, Chile, Canada, Peru and Southern Africa. The German Federal Ministry for Economic Affairs and Energy (BMWi) supports the network’s activities, while the Association of German Chambers of Commerce and Industry (DIHK) has a coordinating role.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Guido Heinz,
Peter Fischer,
Frank Borkent,
Thomas Rotert
Planning and Execution of the First Direct Face Transfer in Zollverein Seam at Prosper-Haniel Colliery

The coal deposits of the gassy Zollverein 1/2 seam at Prosper-Ha-niel colliery were developed from the Prosper Nord working district on mine level 7 (1,159 m below sea level). This comprised the three coal panels numbered 123, 121 and 124. Preliminary gas drainage was a key factor leading to the success of the panel extraction projects in Zollverein 1/2 seam. The thickness of the seam meant that a new ‘category C’ shield support system had to be procured. Following the successful extraction of panel 123 the new support installation was transferred directly into the new face sequence with the supports being transported as complete units weighing nearly 40 t a piece. This report describes the first direct face transfer from panel 123 to the next panel in the sequence, number 121, an operation that was completed on schedule. The planning work, operating parameters and underlying conditions associated with this operation are all described in detail.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Andreas Wahl,
Jan Sprakel
Recent Developments of Pump Stations for Longwall Hydraulics

Increasing lengths of longwalls, increasing support forces of shields leading to higher hydraulic pressure, bigger cylinder diameters in the roof support as well as increasing speed of extraction machines place high demands on the hydraulic supply. Modern hydraulic stations for high production longwalls provide reliably and at high availability more than 2,000 l/min emulsion at a system pressure of 350 to 420 bar for the hydraulic cylinders in the roof supports of the longwall. In addition, more and more water is used for dust suppression purposes. Pumps with an input power of up tp 500 kW per pump are already used today in high production longwalls. To manage the big flow per pump, valves with wear resistant ceramic inner parts are used. The flow of the pumps is controlled using Variable Speed Drives (VSD) and thus adapted to the demand of the longwall operation. KAMAT, worldwide leading system supplier for high pressure technology, is the driving force for further developing pump stations for longwalls.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Ralf Schmidt,
Torsten Niklaus
Long-Distance Pumping of Injection Resins

The German coal industry has been using two-component resin injection as a strata reinforcement and consolidation technique for more than 30 years. Up until the early 1990s these products were mainly processed and delivered via simple pneumatic and hydraulic piston pumps, with pneumatically driven geared pumps also being employed in some cases. The resin products were supplied in disposable cans and drums. Because of increasing geomechanical stresses underground, which was a direct result of ever greater working depths and the high excavation ratio of German coal-bearing measures, it was realised that new solutions were needed for the transport and processing of synthetic resin materials, and this was ultimately to lead to the development of an effective remote pumping system. This paper will describe the various development steps that were taken to arrive at the technology currently in use today.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Nicole Prochnau
Successful Implementation of Innovative Technology into an Existing Operation – Surface Miner Case Study

The implementation of new technology into an existing mining operation can deliver a step change in operation and commercial benefits. But it also comes along with risk. Integrating new technologies is connected to a number of challenges that could result in the rejection of the innovative technology. Detailed planning, robust project management, a good customer relationship and an evaluation of meaningful Key Performance Indicators are main aspects to manage and overcome those risks. At the New Acland Coal Mine in Queensland/Australia an innovative mining system, a Wirtgen Surface Miner, was recently adopted into the existing mining fleet. This paper aims to give an overview of the structured trial that was conducted to support the implementation of a Wirtgen 4200 SM at New Acland Coal Mine. The Wirtgen Surface Miner was successfully implemented and has proven benefits in regards to Health, Safety and Environmental performance, productivity, particle size distribution, loss and dilution and unit costs. This paper is a summary of the Master’s Thesis “Comparison of the conventional mining process to the Surface Miner mining system at New Acland Coal Mine.” conducted in conjunction with New Acland Coal Mine, RWTH Aachen University and Wirtgen.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Axel Bruns,
Timm Kuhlmann,
Johann-Christoph Thiele
Simulation Based Decision Support of Vehicle Usage in Room and Pillar Processes Concerning Productivity, Outcome and Energy Consumption

Saving energy in industrial processes and also in mining underground processes is crucial for modern production. The dependency of different solutions not only on the energy consumption but also on the productivity and the process outcome has to be concerned. For this reason, the Fraunhofer Institute for Manufacturing Engineering and Automation (IPA), Stuttgart/Germany, developed a simulation based model which simulates the production process of injection mold parts and parallel tracks the energy consumption. It makes it possible to try various control strategies for production process or different resources in the process. In the European Union funded I2Mine (Innovative Technologies and Concepts for the Intelligent Deep Mine of the Future) project this simulation based approach will be transferred to a typical room and pillar potash mine of K+S mining company, Kassel/Germany. Here the whole mining cycle could be adapted the methods of energy saving aspects.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Mining Sector, Ministère de l’Energie et des Ressources naturelles, Québec/Canada
Québec’s Mining Sector

The Québec Government is currently working to introduce a stimulating and advantageous investment framework for the mining sector. The aim of the new Plan Nord, launched in the spring of 2015, is to develop mining, forestry, energy, social, cultural and tourist potential in the area of Québec located north of the 49th parallel, and to create jobs and wealth for all Québecers. Responsible mining development plays a primary role in this project. The Government has also launched a Strategic Vision for Mining Development for Québec that promotes mining exploration, the acquisition of geoscientific knowledge to better understand the mineral potential available in the area covered by the Plan Nord, as well as research and development on responsible mining development, to open new horizons for Québec’s mining sector.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Peter v. Hartlieb
China Coal 2016: an Update

The Chinese economy has continued its downward trend in 2016. Poor sales prospects have resulted in no more than a moderate increase in investment in most sectors. As a result, the mining industry is not expected to make much of a headway this year and for those German supplier companies that have manufacturing bases in China efficiency improvement has now become a major issue. A fresh impetus in this area is expected as a result of the industrial modernisation programme ‘China 2025’.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Peter v. Hartlieb
Mining in Kazakhstan 2016

The Kazakh mining sector is gearing up for long-term expansion in the years ahead. The country remains a major supplier of raw materials to the Asian and European markets and while the price of coal, copper and iron ore could well remain weak up to 2020 this sector is still well placed to meet the future. Though Germany and Kazakhstan signed a governmental agreement in 2012 that established a partnership in raw materials, industry and technology, this has still not resulted in any significant projects. This paper describes the main raw materials now being extracted by the Kazakh mining industry and discusses the opportunities that may exist for German mining equipment suppliers.


Order now Mining Report Issue 04_2016 (including this topic)
Read article
Christoph Möller
Fire Prevention in Underground Mining – Requirements for Equipment in Germany and Europe

Fires have been one of the major hazards for miners. In order to minimize fire risks in underground mines, preventive measures need to be taken. Such means are for example using materials which are hard to ignite and hardly spread fire or hydraulic fluids with low flammability. Testing and assessing those properties is standardized in Germany and Europe. In addition, there are international regulations which define such test methods. The following article describes different classification and testing standards for hydraulic fluids as well as plastic components such as conveyor belts, foams and others.


Order now Mining Report Issue 05_2016 (including this topic)
Read article
Walter Hermülheim
Hazard Analysis on Underground Mine Fires in Collieries

Since the mid sixties, there were over 200 spontaneous combustion fires in German collieries, with more than a dozen cases of CH4 ignitions. It should be agreeable that the related mine rescue work for the prevention of damage to property should not be more hazardous than ordinary underground work. This claim requires a regular check of safety regulations for the fighting of fire types which include the potential danger of an explosion. The paper points out the experiences of the German coal mining industry gathered on ignition hazards related to spontaneous combustion fires.


Order now Mining Report Issue 05_2016 (including this topic)
Read article
Bernhard Vogel,
Stephan Großwig,
Bernd Jatho,
Ulrich Palzer
Early Detection of Smouldering Fire Using the GESO-FireFinder M-System – Description and Experiences

The arising of smouldering fire of slack coal in close proximity of conveyer belt systems still cannot be prevented despite of all safety engineering. That is why it is necessary to find the source of fire at an elementary stage and detect it locally. The GESO Firefinder M is based on the technology of fibre optical distributed temperature sensing and guarantees a complete and continuing detection of any temperature anomalies along the whole conveyer belt system. Intelligent analysing software differs between normal running variation in temperature and possible fire occurrence. In case of a fire it generates an alarm even with the exact location to a permanent occupied place (mining control stand). This publication describes the system and shows some experiences.


Order now Mining Report Issue 05_2016 (including this topic)
Read article
Thomas Stöttner
One Seven MINING – an Innovative System for Firefighting and Prevention in Mining

By adding a special foam concentrate and compressed air to water the One Seven MINING system produces compressed air foam (CAF). The foaming agent is a surfactant and a non-flammable substance unlike phenol or polyurethane. By inundating a mine space with foam it displaces any explosive gases and prevents oxygen contact with the fuel. The foam has strong penetrating and lasting inhibitory properties. In spite of many efforts being made to improve occupational safety, the risk of fire and explosions in mines remains due to a risk of spontaneous combustion of the materials, e.g. coal or waste, and because of the presence of explosive gases and dusts, e.g. methane gas and coal dust. The CAF system can be used preventively to cover dangerous areas in the goaf, preventing fire damps and dust explosions. It can also be used for actual fire suppression both on machinery and on the coal itself. Examples for both preventive and active firefighting will be given in this article. One Seven MINING has references from applications in the Czech Republic, in Germany, China and Turkey.


Order now Mining Report Issue 05_2016 (including this topic)
Read article
Nina B. Fietz,
Thomas Bartnitzki
Latest Developments in LIBS for Distinction of Coal and Waste Rock in Explosive Areas

The Institute for Mineral Resources Machine Technology (IMR) at the RWTH Aachen University, Aachen/Germany has been working on options to enable boundary layer detection as well as horizon control for underground coal operations for more than a decade. One of these tested options is laser-induced breakdown spectroscopy (LIBS). After a short introduction into the technology of LIBS, this article describes the challenges to enable LIBS in underground coal operations. Furthermore, an overview of the latest results in examining dust-water suspensions will be given.


Order now Mining Report Issue 05_2016 (including this topic)
Read article
Lothar Schumacher
Commemorative Silver Medal marks 250 Years of Mine Engineer Training at Freiberg University of Mining and Technology 1766-2016

Freiberg Mining Academy was established in November 1765 by Prince Xaver, regent of Saxony, based on plans drawn up by Friedrich Wilhelm von Oppel and Friedrich Anton von Heynitz. It was set up as a training institution for mine engineers and was known as the Electoral Saxon Mining Academy of Freiberg. Teaching began in May 1766. The new institution was badly needed, as in the aftermath of defeat in the Seven Years’ War Saxony urgently had to expand its mining industry in order to make its reparation payments. The present Freiberg University of Mining and Technology is therefore the oldest university of mining and metallurgy in the world. To mark its 250-year anniversary the University is presenting a series of historical coins, culminating in the latest anniversary issue.


Order now Mining Report Issue 05_2016 (including this topic)
Read article
Aarti Mona Soerensen,
Thomas Hillig
Requirements Related to Renewable Energy Solutions for the Mining Sector

Renewable power options are fairly new to the mining sector and are now just at the beginning of the scaling stage. However, they have gained a lot of momentum in recent years and an increasing number of projects are being realized across the globe and in various climate zones. Nonetheless, the largest share of the overall potential is still untapped – largely due to low electricity or diesel prices and to the on-going low commodity prices that put mine operations under extreme cost saving pressure and don’t allow for any larger upfront investments. Once the current market conditions change it is expected that renewables will see an additional surge in the mining sector.


Order now Mining Report Issue 06_2016 (including this topic)
Read article
Alex Fournier,
Bernard Moulins,
Eva-Lotta Schmidt,
Patrice Godin,
Michael Morrow,
Felix Rehwald
Technology, Processes and People: a Simple Recipe for the Successful Integration and Operation of Wind Turbines in Off-Grid Mining Operations

ENERCON GmbH, Aurich/Germany, is a privately-owned manufacturer, constructor and operator of high-performance wind turbines. The company is built on values such as innovation, quality and entrepreneurship; all of which help achieve the goal of providing renewable energy to the world – wherever the need for energy may be. With this vision in mind, ENERCON accepts the challenge of building windfarms in remote and harsh environments such as Antarctica, Caribbean Islands and Northern Canada. This article discusses the factors that contributed to the success of the Diavik and Raglan projects – two projects where wind turbines were integrated to the electrical grid of mining operations in Northern Canada. Despite all the challenges associated with the construction, operations and maintenance of those turbines; performance has exceeded forecasts and financial targets have been attained. Three aspects have made this possible: technology, processes and people.


Order now Mining Report Issue 06_2016 (including this topic)
Read article
Felix Wächter
The Cost Savings Potential of Solar Power and Battery Storage for Mining Companies, Taking the Example of the DeGrussa Solar-Diesel Hybrid Off-Grid Project in Australia

In many countries, the cost of solar power is already at about the same level as the cost of power from coal-fired power stations. Especially in comparison with existing diesel power stations, solar power has been able to develop its cost advantages to the full as a result of the continuous fall in system costs. As a decentralized source of energy, solar power stations can also be installed at almost any remote location. This makes them economical especially for energy-intensive industries such as the raw materials industry, with facilities located at a considerable distance from mains power grids. The DeGrussa project implemented by the juwi Group in Australia shows how a solar farm with battery storage can be integrated into the existing diesel generator network of a copper mine and demonstrates the cost savings potential that can be realized.


Order now Mining Report Issue 06_2016 (including this topic)
Read article
Volker Wachenfeld,
Rollie Armstrong
Sun Instead of Diesel: The Largest PV Diesel Hybrid System in South Africa Supplies a Chrome Ore Mine

Electricity generated from photovoltaic (PV) systems can mean a great deal to mining industries who either have limited or no grid access at all. For companies that rely on a diesel power supply, a PV plant can reduce fuel consumption and thus operating expenditures dramatically. Grid connected facilities could also profit from an additional renewable power supply as it provides a solution for well-known intermittent rolling blackouts or so called load-shedding, of which major parts of South Africa are currently suffering.
In 2012 Cronimet Mining Power Solutions GmbH (CRMPS), Unterhaching/Germany, in collaboration with SMA Solar Technology AG (SMA), Niestetal/Germany, completed the first project combining diesel generators and PV systems at a chrome ore mine in the off-grid region in the South African province Limpopo. With the hybrid system, the mining operator now saves 450,000 l of diesel fuel and 2,000 t of CO2 per year, making it a showcase project for mining applications all over the world where logistics are challenging and where grid power is frequently either unavailable or unreliable.


Order now Mining Report Issue 06_2016 (including this topic)
Read article
Laura Bischoff,
Johanna Summereder
Current Examples of Renewable Energy Use in the Chilean Mining Industry

The mining sector represents the largest source of revenues and the most important sector of Chile´s economy. At the same time the Chilean mining sector is the largest of the country’s industrial energy consumers. The share of energy costs in the total operating costs of Chilean mining operations is between 20 and 40 % and therefore represents a significant factor influencing business profitability. This context has made mine operators increasingly aware of the need for efficient energy supplies. On a political level, the 2050 Energy Agenda – an ambitious Chilean government energy program – sets important political points to drive energy prices down. One of the main long term goals of the program is to increase the share of renewable energy in the national energy mix to 70 % by 2050.


Order now Mining Report Issue 06_2016 (including this topic)
Read article
Michael Weberink
Coal 2016 – Still Dependable in a Changing World

This year’s Annual Report of the German Coal Association (GVSt), Herne/Germany, is entitled “Still dependable in a changing world”. This reflects not only the fact that all the industry’s agreements and commitments are being kept but also that reliability is the defining theme for the end of the coal mining industry in general and for the future tasks that will result from it. The publication focuses the actual situation in the German coal mining industry, the national and global operating environments, developments in the environmental and climate policy relating to the coal mining industry and discusses the national and international background conditions. In addition, the GVSt report picks up RAG´s actual and prospective responsibility for the coal regions. The report can be downloaded from the GVSt website: www.gvst.de


Order now Mining Report Issue 06_2016 (including this topic)
Read article
Thomas Lautsch
From Dog Hole to Zero Entry Mining

This paper builds the bridge in mining developments from the 1980s to the presence and to what will happen in the future. It not only includes technical developments but especially social ones. The article is the conclusion of the author´s presentation, given at the “Forum Bergbau 4.0” conference of the RWTH Aachen University on 1st December 2015.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Thomas Bartnitzki
Mining 4.0 – Importance of Industry 4.0 for the Raw Materials Sector

Today, it seems like everyone is talking about Industry 4.0 concept. However, only a few know what really is behind it: The Federal Government has set a goal to advance Germany with its high-tech strategy towards becoming a global innovation leader. The concept of Industry 4.0 is one of ten future projects that makes a featuring part of this “new high-tech strategy”.

A reliable, sustainable and transparent raw material supply of the economy is of great importance for the development of future technologies. Economic strategic resources enable industrial production processes and innovations and are therefore indispensable for the German high-tech production centers.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Rüdiger Schroedter
How Digital Technology and SAP Can Help Mining Companies Mine Smarter

Digital technology, digital transformation or digital economy are currently big buzzwords as we have seen many industries disrupted by new sales channels, digitized products, new business models or market players. What started with digital music at the turn of the century is now finding its way into more and more industries. Even the mining industry is increasingly looking at how it can benefit from these technologies. Commodities are not on the brink of being replaced by digital versions of them any time soon, so why are mining companies interested in digital? This article will give an answer on this question. The paper is based on the author´s presentation on the SAP International Conference for Mining and Metals from 12th to 14th July 2016 in Frankfurt am Main/Germany.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Ormond O´Neill
Digitalization in Mining – Industry 4.0

The term Industrie 4.0 originates from the German government initiative to integrate manufacturing with state-of-the-art information and communication technology. It is synonymous with the digitalization of industrial processes. While some industries are far along in the digitalization of their processes others, like the mining sector, still have a lot of ground to cover. However technologies are already available today to help mining companies increase their digitalization and at the same time tackle the woes currently plaguing the industry.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Peter Mühlbach
Digital Transformation in the Mining Industry – Next Level mining

Like all industries, the mining industry must face the challenges of digitalization. Today, automation and software already play an important role in controlling the variability of deposits and commodity price fluctuations. This trend will rapidly further accelerate with the digital transformation since the mining industry still has a lower level of automation compared to other industries and thus has correspondingly high potential. Only companies that consistently take advantage of and use the opportunities of new technology can meet the due to the decline in commodity prices increased competitive pressure. In the future, it will be important to combine the “automation islands” still existing today with each other and to optimize all stages of the value chain in total.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Holger Boxnick
The Digital Mine – Transparency in Operational Management for a Higher Level of Efficiency and Effectiveness

Mine operators have been facing enormous cost pressure caused by low prices for raw materials and challenging political para-meters for some time now. A growing demand for cost reduction, increased efficiency, and minimization of maintenance efforts are some of the logical consequences. In order to meet these requirements, extensive optimization in the world’s mining operations is essential. However, it should be noted that almost all optimization potential for the current technology has already been exploited to the greatest possible extent in the past. Thus creating additional possibilities to improve efficiency and effectiveness requires development of a new range of topics, and to be open to reviewing current developments such as Industry 4.0 with respect to specific implementations.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Fiona Mavroudis,
Lars Pierburg
Smart Mining Creates New Openings in the Global Commodities Market

The general fall in prices and high degree of volatility in the commodities market are now having a major impact on the viability and strategic focus of raw materials companies and machine manufacturers. Irrespective of whether the situation is set to continue long term or undergo a complete change of direction, it has already had a transformative effect on the activities of mine operators and their suppliers. Increased productivity, efficiency, workplace safety and flexibility are now very much at the forefront and this has raised the issue of automation to a new level. The rapid development of digital technologies has created all kinds of innovative design possibilities for automation. Fully-integrated systems with (part-)autonomous machines that can move reliably in and through different types of environment and make decisions independently and without human control are no longer the stuff of fantasy in the mining world. The industry has already made a successful start on implementing Mining 4.0.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Christian Niestroj,
Christian Niedringhaus,
Karl Nienhaus
Development of an Underground Positioning System Based on the Ultra-Wideband Radio Technology

For the automation of underground mobile equipment in the scope of the Mining 4.0 initiative, it is necessary to have precise and continuous position information of that very mobile equipment. Different indoor positioning systems are available these days. However, not every system is suitable for use in underground mining operations. At the Institute for Mineral Resources Machine Technology (IMR) of RWTH Aachen University the ultra-wideband radio technology was identified as a suitable candidate. This -article is supposed to give an overview of the past and current research as well as development activities for an underground positioning system based on the ultra-wideband radio technology. Part of this overview will also be the presentation of an improved positioning system by means of sensor fusion.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Bastian Winter
Securing the Long-term Supply of Raw Materials – Protection on Corporate Level

This paper provides an overview of methods to secure long-term supply of raw materials, potentially applicable on corporate level. The feasibility of the methods was investigated with regard to strategic metals. In addition to the general applicability of the instruments, the limits of the implementation on corporate level have been assessed. The paper is based on the evaluation of literature on long-term supply of raw materials and different protection methods. The results point out the importance of the debates held and the continuing search for alternative instruments to secure long-term supply of raw materials at corporate level. The author identifies the relation of long-term supply of raw materials to current challenges and opportunities, related to the strategic goal of a successful transformation of the economy into Industry 4.0.


Order now Mining Report Issue 01_2017 (including this topic)
Read article
Jörg Ritter,
Thomas Rotert
Working the Zollverein 1/2 Seam at Prosper-Haniel Colliery Using Dedicated Fire and Explosion Protection Measures

The plan was to extract three coal faces in the Zollverein 1/2 twin seam in the Prosper North district at Prosper-Haniel colliery of RAG Aktiengesellschaft, Herne/Germany. A new safety concept was specially developed for this operation and its essential features would then be adopted for use in the subsequent production faces in Zollverein 1/2 seam. Coping with the high desorbable methane content of the seam placed huge demands on the team responsible for the first winning face (panel 123). The high risk of spontaneous combustion in Zollverein seam was another real challenge that had to be faced. This paper describes the procedures that were used to combat these hazards, with a focus on preventive and protective fire control measures.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Ivan Akinshin,
Christian Missal,
Lothar te Kamp
Simulation of Pressure- and Time-Dependent Behavior of Backfill Material in Numerical Calculations

The influence of underground openings due to mining activities on ground subsidence and sinkholes can be minimized by the use of backfill material. Mechanical properties of the backfill material, e. g. material stiffness, are depending on the pressure, and if binders are used, are also developing with time. Numerical simulations are an efficient tool to help estimating the influence of the backfill material on the deformation behavior and the stress distribution.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Sebastian Mundry,
Christoph Sandgathe
Efficient Mining of High Seams with Automated LTCC Operations

Longwall mining is an expensive undertaking – from the preparation of the site to capital investment in the equipment. That is why longwall owners have high performance expectations, especially in tough economic times when commodity prices are low. One of the ways longwall mines achieve or exceed their owners’ expectations is through the use of high efficient Longwall Top Coal Caving (LTCC) technology production, in combination with the extensive use of automation. LTCC remains a seldom used method for mining high seams efficiently and ecologically with sustainable use of deposits. If this mining methodology is used in combination with the advantages of automated longwalls, these technologies enable longwall mines to use the deposits in the most efficient and sustainable way possible, which reduces operational costs, improves profitability and boosts efficiency.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Krzysztof Krauze,
Waldemar Rączka,
Grzegorz Stopka
Innovative Hydraulic Roof Support for Low Seams

One of the basic problems of Polish underground mining is low seams extraction. The main impediment in this case are extremely harsh exploitation and operation conditions of long-wall complex machines, which in most cases result from mining conditions and the characteristics of powered hydraulic roof supports. According to this, in the Department of Mining, Dressing and Transport Machines at the AGH University of Science and Technology, Krakow/Poland, the research was undertaken in the scope of development of principles and guidelines for the design of innovative hydraulic roof support for low seams, based on model and experimental studies. In this paper virtual models of new hydraulic roof support and the conception for a structure of a control system are presented. Research in this field was conducted for the project entitled “Studies of development of innovation hydraulic roof support for low seams”. The project is funded by the National Center of Research and Development (NCBiR).logy is used in combination with the advantages of automated longwalls, these technologies enable longwall mines to use the deposits in the most efficient and sustainable way possible, which reduces operational costs, improves profitability and boosts efficiency.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Robert Jesumann,
Michael Eichhorn
Cabling for Energy and Control Technology in Deep Mining

In the harsh conditions of raw materials extraction underground, people and machines alike are pushed to their absolute limits. Every single component matters. If just one of the “cogs” fails in a mining operation, the cost of repair and reinstatement is many times that in other branches of industry or production. One of those cogs is the cable required for supplying energy to the individual machines underground. Explosion-proof, wear-resistant, flexible and durable – these are the fundamental requirements for cable and wiring in this sector. Equally subject to these requirements are data and communication cables, which are gaining increasing importance in mining. More and more technical solutions are also demanding additional monitoring of energy and communication. So the need for space for such wiring systems is increasing. Therefore Prysmian Group, Neustadt near Coburg/Germany, has developed a new flat cabling which incorporates up to six wiring systems and thus considerably reduces the space required for a machine’s energy-supply chain.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Frank Bauer,
Siegfried Harhoff,
Sven Heuer,
Christoph Kuchinke
System Solutions for Drill and Blast Drivages in Small-Profile Roadways

The MINING Division of HAZEMAG & EPR GmbH, Dülmen/Germany, which is one of the partners in the SK Mining Alliance, specialises in client-specific machines for drill and blast drivage operations in the mining and tunnelling industries. These system solutions are employed for drivage and rebuilding of roadways and as well as using suitable machine technology are also designed to help improve the process cycle. Multifunction machines such as the HBL 800 drill-loader, along with innovative developments like the HRE 300 roadhead excavator, have proved their effectiveness and have as a result become part of the user’s operations planning process. The HRE 300 in particular represents a very interesting solution for high-performance drill and blast drivage operations in small-section roadways of 9 m2 and above.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Roland Grafe
Electro-Mobility in Underground Mining

The market for machines and equipment in underground mining will experience significant growth in the coming years. Siemens AG in Nuremberg/Germany has spent years cultivating long-term and successful business relationships with a number of major vehicle manufacturers in the field of mobile mining technology. These relationships are the foundation for expansion of the company´s portfolio to include diesel-electrical drive systems for underground mining vehicles. The conversion from diesel-mechanical to diesel-electrical drive technology represents an important step toward reducing the overall costs of mining activities, complying with increased requirements for environmental standards, and improving work conditions. This development is part of a general trend of electrification, automation, and digitalization that has been emerging for some time in other sectors of industry.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Ivan Akinshin,
Christian Missal,
Lothar te Kamp
Simulation of Pressure- and Time-Dependent Behavior of Backfill Material in Numerical Calculations

The influence of underground openings due to mining activities on ground subsidence and sinkholes can be minimized by the use of backfill material. Mechanical properties of the backfill material, e. g. material stiffness, are depending on the pressure, and if binders are used, are also developing with time. Numerical simulations are an efficient tool to help estimating the influence of the backfill material on the deformation behavior and the stress distribution.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Peter von Hartlieb
Coal & Co. – China’s Raw Materials Sector at the Turn of the Year

China, the world’s largest coal market, is also showing signs of increasing sensitivity in the face of environmental and social issues. The Chinese Government has reacted to this and the coal industry – which admittedly is also suffering from over-capacity and a high level of debt – has as a result been obliged to adopt with a wide range of measures. In addition, investment has been stepped-up in renewable energies – particularly solar power. It should not be forgotten that China is in fact the world’s main producer of the rare earth minerals that are vital for high-tech technologies such as renewable energies. With coal prices rising again the pressure is beginning to lift somewhat from coal mining companies in China and it can therefore be assumed that the country is still a long way from the decarbonisation efforts now underway in the Western economies.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Kai van de Loo,
Andreas-Peter Sitte
Coal Market 2016

World coal consumption and production declined through 2016, though there were significant regional differences. The global downturn in consumption was mainly a result of significant reductions in China and the USA. While in Europe coal has been in retreat for many years, it has been making further gains in parts of Asia, and especially in India and in the south-east. In Germany coal consumption again showed a substantial downturn during the course of the year, especially in the power generation market. National coal production will cease as planned at the end of 2018 and the industry continued to downsize accordingly through 2016. At the same time the Herne-based RAG company, which has overall responsibility for coal mining operations, has been making strategic preparations for the post-mining era. Coal prices rallied strongly in mid-2016, this benefiting steam coal as well as coking coal and coke.


Order now Mining Report Issue 02_2017 (including this topic)
Read article
Stefan Hager
Frank Wollnik
The End of the German Coal Mining Industry and RAG’s Transition to the Post-Mining Era

The cessation of coal production at Herne-based RAG’s last two collieries at the end of 2018 will mark the end of several hundred years of mining in the Ruhr, Saar and Ibbenbüren coalfields in Germany. The end of the production period will immediately be followed by a decommissioning phase during which the current underground workings will have to be evacuated of their equipment and the disused shafts safely filled-in. Only then can the post-mining era really begin. For the companies involved this step into the post-mining world will bring major, fundamental changes. Accepting permanent and sustainable responsibility for the legacies of the mining industry will therefore mean helping the affected businesses to accept a new set of structures that are adapted to meet the challenges of the future. This applies both to the company organisation as well as to the introduction of appropriate risk-management and monitoring systems.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Andreas-Peter Sitte
Frank Schwarz
We Can Do Transformation in this Region – Interview with Prof. Hans-Peter Noll

For some 40 years Essen-based RAG Montan Immobilien has been helping shape structural change in North Rhine-Westphalia and Saarland by way of future-oriented and sustainable development projects. Based on former mining land these initiatives range from sports centres, business parks and logistics sites through to smart, liveable urban quarters. RAG Montan Immobilien is currently responsible for around 9,400 ha of RAG property that is no longer being used by the mining industry. Some 1,500 ha of this land is now being put to good use in the form of some 77 individual development projects in North Rhine-Westphalia and Saarland. In the following interview Prof. Hans-Peter Noll, Chairman of the Board of Directors of RAG Montan Immobilien, presents some examples from the company’s successful development portfolio.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Klaus Zschiedrich
Thorsten Pietsch
Mahmut Kuyumcu
Meeting Technical, Ecological, and Social Challenges in the Decommissioning of Potash Mines in Eastern Germany

With annual production of almost 3.5 mt of K2O, former East Germany (GDR) was the third-largest producer of potassium, ranking behind only the Soviet Union and Canada. More than 80 % of production was intended for export, to obtain urgently required hard currency. For this reason, beginning in the 1970s, East Germany also began mining of otherwise unprofitable hard-salt deposits and geomechanically problematic carnallitite fields. In the course of increasing concentration of available mining resources on maximizing production, moreover, the backfilling of mined-out cavities, necessary over the long run, was increasingly neglected. An additional development was the increasingly smaller dimensioning of the pillars used for supports in the mined fields, as well increasingly long spans between supports in the mined-out cavities. The purpose here was to further reduce the specific expense of mining. All these developments led to a critical increase in geomechanical risks in the underground workings.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Ulf Jenk
Carsten Wedekind
Progress Report on the Wismut Decommissioning Project at the Flooded Königstein Uranium Mine

Prospecting for uranium began in the Upper Cretaceous sandstones of the Elbe river valley southeast of Dresden in 1961. Systematic mine operations commenced 1964. As a response to low and decreasing ore grades alternatives to conventional mining were precociously searched for. Development of in-situ leaching technology started at the end of the sixties leading to a changed exploitation method using sulphuric acid. Uranium mining (exploitation) was terminated at 31st December 1990. Accompanying to the physical underground remediation operation including closure of mine workings and removal of technical equipment and installations comprehensive R&D-Efforts were carried out for preparation of the mine flooding. Flooding of mine section I – up to 140 m a.s.l. – started January 2001. Since January 2013, the water level is maintained in the flooded mine at 139.5 m a.s.l. by continuous pumping. About two thirds of the volume of mine workings and pore space is flooded at present. Wismut GmbH, Chemnitz/Germany, intends to continue the flooding to the natural level of groundwater. The permitting procedure – initiated in December 2011 – is still pending. Currently, technical discussions with respect to potential scenarios and connected risks with authorities are conducted. As a result, Wismut applies for a hydraulic test end of March 2017 to obtain basic data for prediction of hydrological and geochemical conditions as result of a further flooding.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Peter Goerke-Mallet
Christian Melchers
Andreas Müterthies
Innovative Monitoring Measures in the Phase of Post-Mining

Mining activities often influence huge areas which can only be observed efficiently with remote sensing methods. Recently the European Programme of Earth Observation Copernicus began to offer the opportunity to pursue this monitoring with innovative attempts in the production phase as well as in the post-mining phase. The combination of spatial data gained from satellite-supported sensors allows a precise verification of mining-induced environmental impacts with high resolution in time and space. This paper describes early experiences with innovative monitoring measures and discusses the perspectives of a sustainable mining process. It is based on the presentation of the first author on the Congress of the International Mine Water Association (IMWA) 2016 in Leipzig/Germany.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Stefan Fuchs
Occupational Safety as Central Element of a Modern Open Pit Planning Project

This article calls for a better consideration as well as integration of health and safety issues into all parts of the surface mining industry and points out the strong affiliation of occupational safety and modern mine planning projects. By the example of four major occupational safety issues – slope stability, bench width and height, planning of driveways and ramps, schedule of mining – the strong existing link between operational safety and planning aspects in open pit mines will be pointed out. The efficiency of a modern integrated reservoir management can be increased significantly in the earlier planning phases by considering and including the requirements of operational safety management. The content of this article was subject matter at a presentation held on the 1st Vision Zero Europe Conference of the International Social Security Association (ISSA) on 8th September 2016 in Bochum/Germany.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Thomas Berens
Mixing Technology in Mining Applications: Make the Mixer Match

It is often necessary to stabilize the backfill material in mining applications. The spectrum can range from stabilizing powdery materials with particle sizes of a few tenths of a millimeter, to mixing filter cake with lumps larger than a human fist, to dry processing or to manufacturing nearly liquid sludges. Mixers that cost-effectively process large quantities of materials into homo-genous mixtures are also used to moisten materials, such as fly ash, for transportation purposes to minimize dust emissions and for safe disposal. There are many different types of mixers to cover this wide range of applications. The task is to select the right mixer for the various applications, meaning a system that is suitable both in terms of the homogeneity of the mixture and the mixer’s performance. This article is intended to act as a guide in this selection process.


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Michael Lersow
Energy Source Uranium – Resources, Production and Adequacy

Germany is one of the first developed industrialized countries that is leaving the peaceful use of nuclear energy. It is important to note that other industrialized countries, such as Austria and Australia, did not start and Italy confirmed its exit after Fukushima. In addition to the risk technology “nuclear power”, two other factors have been and are still being argued against the use of nuclear energy; the lack of long-term disposal facilities, in particular for the spent nuclear fuels and the waste from the reprocessing process, as well as the lack of resource security for the nuclear fuel uranium (thorium). In this article the second question is to be considered which focuses the resource security for the energy raw material uranium. For the energy source uranium it is clarified as to what extent natural resources are known, what results coming from further exploration are to be expected, and under which boundary conditions the resulting adequacy can be quantified and assessed. In addition the extent will be discussed to which the amount of known resources has so far developed and the time dependency, from which forecast a discussion of adequacy should be based. The author explicitly refers to the contribution to the same problem, which appeared in Glückauf 144 No. 3 (2008).


Order now Mining Report Issue 03_2017 (including this topic)
Read article
Elisabeth Clausen
Mine Ventilation in the 21st Century – Development Towards Adaptive Ventilation Systems

Mine ventilation and climatization became increasingly important over the last decade. Main challenges and drivers have been the development of mining activities towards greater depths, more complex deposits with a larger areal extent, the further introduction and implementation of diesel-powered vehicles as well as stricter occupational exposure limits and rising energy costs. To meet these requirements and to keep the operation viable, new holistic ventilation concepts, methods and tools need to be developed for providing and guaranteeing sufficient fresh air for safe and efficient operations in underground mines at all times and all locations. Current approaches focus mainly on the development and implementation of ventilation on demand concepts (VOD) and systems. However, the smart and intelligent, safe “Mine of the Future” demands the further development of advanced and adaptive ventilation systems. In this paper, a holistic concept for an advanced and adaptive ventilation system will be introduced and its key components and elements described. Furthermore, the implications on the higher education in the field of mine ventilation and climatization discussed and an exemplary teaching concept presented.


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Felix Dicks
Elisabeth Clausen
Ventilation on Demand

As mining activities advanced throughout the centuries, mines increased in depth and complexity, resulting in the development of new technologies and processes. Ventilation was not only affected in terms of increased air quantities to be supplied, but controlling the airflow also gained attention. Until today, these trends are ongoing, meaning mines are still increasing in complexity, depth and machinery used, thus ventilation is facing new challenges. This paper introduces past mine development as a motor for progress and describes historic challenges in ventilation with corresponding solutions. Further on, today’s and possible future challenges are being discussed. Under the conceptual name “ventilation on demand” (VOD), research institutes and mining companies are designing new concepts for coping with these challenges regarding air quality, system optimisation and energy efficiency. This article describes and explains different attempts in terms of VOD, including their specific requirements.


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Sascha Engler
Jens Kegenhoff
Matthias Papesch
Ventilation on Demand – Controllable Mine Fans, Applications and Limitations

Worldwide interest in developing technology for the automatic control of mine ventilation systems has existed since the 1980s and has mainly been driven by the need to save costs. Demand-oriented ventilation technology is based on the fundamental idea that those areas of the mine where a lot of work is being done should be provided with a greater flow of ventilation air, appropriate to their needs, that those parts where there is little or no activity whatsoever. In this way it is possible to increase the volume flow in the active production areas at the expense of the ventilating air that is delivered to the non-active zones. The aim is to achieve the optimum volume flow control at the lowest operating cost based on the minimum volume flow requirement in the areas concerned. This paper examines in detail the fundamental concept of ventilation on demand (VOD) and the basic approach that is being taken from today’s perspective. As the technical options available have been improved over the course of the last two decades it seeks to present the systems developed to date and to examine their advantages and limitations along with the opportunities provided by fan control technology.


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Craig M Stewart,
Saiied M. Aminossadati
Mehmet S. Kizil
Use of Live Sensor Data in Transient Simulations of Mine Ventilation Models

The implementation of sensor systems to monitor mine ventilation atmospheres offers numerous safety and operational benefits to mines. Detection of various mine gases, changes to airflows and temperature, and detection of clearance of fumes or contaminants are some of the obvious benefits of using atmospheric sensors in mines. The prediction of atmospheric conditions between sensors, however, is potentially difficult, and to gain complete coverage a mine will require either many sensors or a method of extrapolating and predicting atmospheric conditions between and downstream from a sparser array of sensors.


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Heinz Engelke
Photoionization Detectors (PIDs) – Theory, Uses and Applications

Photoionization technology and operation PIDs effectively detect and monitor for numerous hazardous substances, providing maximum benefit and safety to users. While many hazardous gas detection methods are available, photoionization detectors offer the combination of speed of response, ease of use and maintenance, small size, and ability to detect low levels, including most volatile organic compounds (VOCs).


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Adrian Halim
Refuge Chambers in Underground Coal Mines – Do They Represent a Good Strategy to Manage Emergencies?

The 2006 Sago, Darby, and Aracoma mine disasters in the USA forced the US government to implement legislation (MINER Act) that, among other measures, requires all US underground coal mines to install and maintain refuge chambers to manage emergencies in fires or explosions. However, there is still a debate on whether this is a good strategy. Australian coal mines adopt a strategy that focuses on instructing mine workers to self-escape to the surface. They are not required to use refuge chambers by Australian mine safety legislation. This paper discusses these two strategies and analyses their merits and problems.


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Jürgen Brune
What Can Go Wrong with Mine Refuge Chambers?

Following the 2006 explosion at the Sago mine in West Virginia/USA twelve miners were trapped without communications for 47 h in a self-made barricade. When mine rescuers finally arrived, eleven of the twelve had died of CO poisoning. This prompted the US government to enact the MINER Act and follow-up regulation, requiring all underground coal mines to maintain mobile underground refuge chambers that provide life support for up to 96 h. This paper examines some of the engineering challenges associated with refuge chambers, including:


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Uwe Maaßen
Hans-Wilhelm Schiffer
The German Lignite Industry in 2016

Germany’s domestic lignite output decreased by 3.7 % from 178.1 mt to 171.5 mt between 2015 and 2016. 2016’s extracted lignite had a net calorific value of 52.7 mtce. 155.2 mt, or more than 90 %, of that output was used in utility power plants supplying the general public. This translates into a decrease of 2.6 % compared to the previous year. 14.2 mt was used in the factories of the lignite mining industry for the manufacture of solid products. 1.7 mt was used to generate electricity in mine-mouth power plants. 0.4 mt accounted for other sales of raw lignite and changes in stocks. Lignite’s contribution to Germany’s total gross electricity production amounted to 23.1 % in 2016.


Order now Mining Report Issue 04_2017 (including this topic)
Read article
Oliver Langefeld
Fully Automated Underground Mine

Since its mechanisation – mainly 1950s to 1970s – and first approaches for automation of single processes – since late 1980s – the mining industry is now developing solutions for complete automation systems for independent mine sections or, ideally, entire mines. Applications will be found first in countries of intensive mining activities, such as the USA and Australia, as well as in countries of highly demanding mine climates, such as South Africa with its deep gold mines. Generally, with no people in the mines, automation can lead to a significant decrease in accident numbers. Heat and gas levels (NOx and CO) will be no major concerns. Ventilation has to remove the heat from machinery and to support it with oxygen if it is a combustion engine. These goals could be achieved within the next ten to 15 years. However, this will require systems that are highly integrated and fitted with adequate communication opportunities. Finally, fully automated mining systems will be a requirement for deep-sea mining and sky mining.

What exactly are the demands in the future? What shall future products look like and concepts be about? To answer these questions, it is important to first discuss expected advancements and to define the parameters of influence. Besides technological aspects, also social changes and new ideologies have to be respected. The world of future mining will be interconnected and operating with tolerant approaches. The relevant influencing factors are being discussed in this paper.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Lev Filippov
Caroline Izart
Horst Hejny
Knut Ansgar Hirsch
Barrie Johnson
René Kahnt
Horst Märten
Wickus Slabbert
The BIOMOre Project – A New Mining Concept for Extracting Metals from Deep Ore Deposits Using Biotechnology

BIOMOre is an EU funded project within the Horizon 2020 funding scheme that addresses the topic “Mining of small and complex deposits and alternative mining”. This three year project, started in February 2015, comprises 23 partners located in nine different countries with five universities being included. Germany, Poland, Austria, United Kingdom, Finland, France, Sweden, Spain and South Africa are involved.

The EU is highly dependent on the import of mineral and metallic raw materials and therefore supports developments that strengthen European mining of these commodities. The aim of the BIOMOre project is to develop a novel base metal mining technology that has lower environmental and social impacts and operates at a lower cost than conventional mining techniques.

BIOMOre’s key concept is the coupled use of in situ leaching and bioleaching technologies applied to deep deposits. Kupferschiefer, a copper ore mined at three sites in Poland by the company KGHM, which is Europe’s largest producer of copper, has been selected to carry out a feasibility test of the technology.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Tobias Krichler
Holger Lieberwirth
Maria Ussath
Nils Hoth
Selective Excavation of Spoil Dumps Using Heavy Machinery: Study Based on a Chilean Tailings Impoundment

Mine tailings are often disposed of in slurry dumps. Older facilities of this kind may include relating dams that have been poorly designed and constructed. This can pose a threat to local residents and the environment. Progressive oxidation can result in the dissolution of metals. This may impose an increased pollution burden on the aquifers. The stability and design of these structures is also very important. Impoundments of this kind, depending on the particle size distribution of the stored material and the degree of moisture penetration, can become transformed into a completely fluid state when poorly constructed, even when the activation energy is relatively low. This can cause damage by breaching of the dam wall over a wide area. Tailings excavation can therefore be a necessary measure in order to address environmental and safety issues in the long term. Such an excavation operation may even be justifiable for economic reasons. Many of these tailings impoundments were filled several decades ago and by today’s standards contain considerable quantities of raw materials in comparatively high concentrations. There are many reasons for the upsurge in economic interest being shown in old waste dumps, including the development of new mineral processing techniques, a change in the price structure of the main valuable metals, a growing interest in accessory minerals and secondary mineralisation actions at certain horizons due to processes taking place within the body of the impoundment.

With all these aspects in mind the Freiberg Mining Academy and other partners carried out investigations into a Chilean tailings impoundment as part of a scientific Secondary Mining Project (SecMinStratEl). The installation in question has been assessed as lacking long-term stability, according to Chile’s current structural standards. One aim of the project was to investigate a cost-effective option for the excavation of the tailings material with possible selective recovery of the enrichment zones.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Frank Otto
Jürgen Kanitz
A First Step Towards Landfill Mining

The term “urban mining”, which is now a well-known concept, refers to the reclamation of compounds and elements from man-made sources. When buildings are being demolished, e. g., any valuable materials encountered, such as copper pipes and cables or old lead piping, can be extracted separately and the metals reused. Concrete rubble can also be recycled to produce new aggregate and scrap brick material can be turned into plant substrate. A sub-type of urban mining is “landfill mining”. Household waste dumps have been widely used over the years and sites of this kind are to be found in practically every major residential area. In Germany alone there are an estimated 106,000 abandoned installations of this kind as well as 372 old landfill sites (based on figures obtained for 1988). Until the year 2005 the latter were in some cases also allowed to be used for the storage of organic waste.

However, before old landfill sites and waste tips of this kind can be opened up again with a view to extracting the valuable materials they contain it will be necessary to carry out investigations into the biological activity of such installations. It must be assumed that most of these 100,000-plus abandoned sites will still be biologically active and will therefore contain huge quantities of reactive organic matter. Opening up a waste dump or landfill site of this kind will cause oxygen to be introduced into the system and this will in turn trigger chemical and biological reactions. This will inevitably result in the emission of gases and unpleasant odours. When combined with rainfall the outcome will be washouts and a contamination of the groundwater.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Tobias Vraetz
Ralph Baltes
Nina Fietz
Karl Nienhaus
Acoustic Emission Technology and Thermal Imaging for Material Flow Characterization in Mining

Successful process control during the extraction process, as well as the enrichment process of primary raw materials, requires the sensor-based determination of the material composition. Typical technologies, which have been utilized successfully in the mining industry, make use of the electromagnetic spectrum, e. g. XRF, LIBS, NIR, etc. These technologies are usually integrated into the respective process by either establishing a bypass of the main mass stream, which is then measured, or directly along the main mass stream. These so-called inline processes are usually supported by traditional offline sampling techniques. However, state-of-the-art sensor technologies do not cover the determination of all mineral compositions in material streams. Based on test measurements in a laboratory scale two more technologies feasible for the inline-characterization of bulk material flows could be identified: first, the acoustic emission (AE) technology and second, thermal imaging based on long-wavelength infrared emissions. Based on characteristic values generated from the respective raw emission signals it is possible to utilize machine learning algorithms, which could in turn detect recurring signal patterns according to the material composition of the bulk material. Machine learning algorithms usually make use of given data sets from similar use cases in order to generate a so-called prediction model. Based on this, the algorithms are able to allocate different characteristic values to specific classes – in this case different types of material – within the bulk material flow.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Aarti Mona Soerensen
Impacts and Implications of Hydraulic Fluids for the Total Cost of Ownership (TCO) of Mining Equipment

According to a recent industry survey, only 25 % of mining companies believe that cost savings of more than 10 % can be achieved with the right choice of hydraulic oil. 43 % of the surveyed companies even question if the use of high-quality lubricating oil can lead to cost savings at all. At the same time, 95 % of mining companies claim to have experienced unscheduled machine shutdowns in the last three years, and 56 % of these companies have indicated that they are aware that these production stops were due to the wrong choice or poor handling of lubricating oil.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Alexej Zich
Yuriy Nikolayevich Linnik
Vladimir Yuryevich Linnik
Ways of Enhancing Endurance of Fastening for Cutting Bits of Coal Mining Machines

This article presents the outcomes of a research project to determine the mechanisms of loads imposed on fasteners of cutting bits as well as the resulting wear. Reasons have been identified for the deterioration of the cutting steel under static loads during different cutting profiles. In this context research has also been undertaken to identify means to increase the useful life of fasteners under varying operating conditions.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Jože Kortnik
Underground “Green” Mining of Dimension Stone – Limestone in Slovenia

In total eleven dimension stone – limestone quarries in Slovenia, underground mining is carried out today in five quarries, Hotavlje I quarry, Lipica I quarry, Lipica II quarry, Doline quarry, and Debela griža quarry. In all five quarries the reason was primarily the geological structure of the site, the quarry’s condition, the potentially large amounts of the overburden in the event of an expansion of the surface part of the quarry, and the increasing needs for this raw material, i. e., natural/dimension stone. The Management of the companies with a transition to underground extraction of dimension stone meets the highest environmental standards, greater competitiveness of their dimension stone on the market, and provides environmentally-friendly mining or so-called green mining. The underground extraction of dimension stone blocks is done using a modified room-and-pillar excavation method that is adjusted to each site’s geological and geomechanical characteristics, with regularly or irregularly distributed high safety pillars. In this article will be shown in more detail the current state in the quarries with technical parameters of underground dimension stone extraction and the results of the geotechnical monitoring by measuring the stress state of the high safety stone pillars.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Manuel Probst
Janes Bohlen
Export Finance in the Mining Industry

This article deals with export finance for the mining industry. Although the issue has already entered the industry, the hurdles for small to medium-sized enterprises seem to be too large to make a full use of export finance. For this reason, the following article is addressed to exporters who have not yet dealt with the subject in detail. The topic is explained by an example from the mining industry. It highlights the challenges faced by exporters as well and provides a solution approach.


Order now Mining Report Issue 05_2017 (including this topic)
Read article
Guido van den Berg
Coal to Chemistry. On the Material Utilisation of Lignite

There are many who believe that Germany’s lignite industry has no future. After all, the country has committed itself to the energy transition and it is a fact that Germany’s ongoing turnaround in its energy policy will gradually drive lignite out of the energy mix. For the mining companies this means having to safeguard lignite supplies as a reserve for renewables-based electricity in the long term and under reasonable economic conditions, and this in spite of the declining production of solid fuel for energy generation. On the other hand, however, it represents an opportunity for identifying and developing “smarter” solutions in which this particular natural resource can be used. It is certainly worthwhile considering potential uses for lignite outside the electricity market. This fact has also been recognised by a cross-party expert committee from the North Rhine-Westphalian State Parliament that has now recommended lignite to be used as a feedstock …


Order now Mining Report Issue 06_2017 (including this topic)
Read article
Rüdiger Schwarz
Craig Griffiths
Brendon Hausberger
Simon Holland
Axel Juch
Rebecca Reiche
Case Study for the Construction of a 10-bpd-ALF-FT Plant for the Production of Sustainable Synthetic Kerosene for the German Aviation Industry Based on Different Carbon Sources

The authors have successfully completed several desktop studies for German and international coal producers over the past two years. The main focus of these studies was on the one hand on the presentation of the market environment for sustainable synthetic fuels and on the other hand on the explanation of the technical and technological process and plant concept of ALF-FT technology. The strategic goal is to provide proof of the basic technical and economic feasibility (proof of concept) of the production of sustainable “green” fuels for the German aviation industry. Initial model calculations show that this 10-bpd system can be operated under certain conditions with a positive economic result.

The authors are also currently involved in project developments aimed at using “green” hydrogen from alternative sources as a feedstock on the one hand …


Order now Mining Report Issue 06_2017 (including this topic)
Read article
Franz-Josef Wodopia
World Coal Market 2016/2017 and the Shifting Parameters of the Energy Transition

This paper reviews the developments that affected the coal markets in 2016 and assesses the prospects for 2017. It also reports on market developments in Germany and on energy policy actions and goes on to examine the social responsibilities of the coal importers as far as coal production is concerned (CSR). These observations are based on the Annual Report of the Association of Coal Importers (VDKi) 2017 – Facts and Trends 2016/2017. The VDKi, Berlin/Germany, is a market-based association that traditionally represents the interests of coal merchants and coal consumers, as well as those of logistics companies operating both in Germany and elsewhere in Europe.


Order now Mining Report Issue 06_2017 (including this topic)
Read article
Michael Weberink
Coal 2017: Taking Responsibility for Generations

After a history stretching back more than 200 hundred years the German coal industry will close down for good at the end of 2018. The Essen-based RAG company is now committed to finding solutions for the inherited liabilities of the mining industry that will prove sustainable in the long term. Yet the transition to the post-mining era will not happen overnight. When production comes to an end in late 2018 the industry will enter a closure phase that will last from 2019 to 2021. During this period the last few collieries will be decommissioned and the remaining workforce will be downsized in a socially compatible manner. RAG will then continue to be responsible for post-mining operations from 2022 on. The company has already drawn up a sustainability strategy that sets out the methods it intends to use in tackling the legacy of the mining industry. This covers the three thematic focal points of post-mining operations, employees and business units, and cultural and social issues. The Annual Coal Report published by the German Coal Association (GVSt) in Essen, which this year bears the title “Taking responsibility for future generations”, presents the RAG sustainability strategy in some detail and …


Order now Mining Report Issue 06_2017 (including this topic)
Read article
Eckehard Büscher
Peter von Hartlieb
Mining Does Not End with the Closure of Our Coal Mines: Network Mining – Smart Mining Global

For more than two and a half years, the Network Mining “Smart Mining Global” has been dealing with the concerns of mining related companies in North Rhine-Westphalia. The network is organised by the EnergyAgency.NRW on behalf of the Department of Trade and Industry of the state of North Rhine-Westphalia. The main focus lies on medium-sized enterprises of the supplying industry. By today, the network has integrated more than 600 companies, institutions and associations. Members of the network profit by the chance to get in contact with each other to exchange information. Furthermore, with more than 50 publications and more than 30 conferences, the network informs about the situation and changes on the world market.


Order now Mining Report Issue 06_2017 (including this topic)
Read article
Peter von Hartlieb
Outlook Turkey

Eight in ten of Germany’s mid-sized companies generate a significant part of their turnover abroad – and the same goes for many mining suppliers too. In spite of current uncertainties and geopolitical crises nearly one in every two small and medium-sized companies intends to maintain its overseas business strategy for the next three to five years and many are even planning to expand these operations. These were the findings from an SME study conducted by DZ Bank. In view of the protectionist economic policy announced by US President Donald Trump the Federation of German Industry (BDI), Berlin/Germany, has advised German companies to look increasingly towards Asian markets, thereby confirming the views of the Network Mining Group of the EnergieAgentur.NRW in Dusseldorf/Germany and many association experts. As a result, attention is shifting increasingly to countries on the Balkan peninsula, the Black Sea region …


Order now Mining Report Issue 06_2017 (including this topic)
Read article
Oliver Langefeld
Angela Binder
Responsible Mining

Mining influences the natural and social environment to a great extent. More than other industries, the mining industry is aware of this impact, especially regarding their historical legacy. Responsible mining is characterized by this awareness and the dealing with the impact. The common definition of sustainable development reflects the combination of that awareness and the handling of development in present and future. Refusal of mining does not represent a sustainable development because the present generation needs raw materials for their living. Rather, mining needs to be performed with regard to the responsibility for the present and the future. Therefore, the mapping of needs and impacts represents an essential task for sustainable activities. Taking up the definition of sustainable development, responsible mining should shape the presence, add value …


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Tom Butler
Mining Has Never Been More Important – So Let’s Mine with Principles

Germany played a leading role in planning for a low-carbon economy, introducing the Energiewende policy five years before the 2015 Paris Agreement on climate change. Energiewende helped catalyse the renewable energy market and the growing electrification of economies around the world. Helping the world decarbonise is one important role that mining will play in the coming decades. The other driver of demand for mined products is population growth. With the increasing demand for mineral resources societal demands will grow too. The International Council on Mining and Metals (ICMM), London/UK, proclaims ten principles, which form the core of a sustainable development framework. ICMM´s members are committed …


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Karoline Kickler
Certification of Responsible Mining Practices and Mineral Supply Chains

The term “seal jungle” shapes the debate on sustainability initiatives and their standards in various sectors of the economy, such as agriculture or the textile industry. But what about standard initiatives for mineral raw materials? A German research consortium from 2015 to 2017 has dedicated itself to this topic, including the Federal Institute for Geosciences and Natural Resources (BGR), Hanover. The following article discusses the background, objectives, and differences between sustainability initiatives in the mining sector and the problem of standard diversification. Greater cooperation and harmonization of standards, a more transparent presentation of the state of implementation and the impact on the ground and an open approach to lasting challenges are recommended as important next steps.


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Heinz-Werner Voß
Certification of Responsible Mining Practices and Mineral Supply Chains

For almost 500 years, hard coal has been extracted from the Ibbenbüren deposit. Started as near-surface mining in the outcrop deposit in many, partly private, small creeks, modern anthracite coal mining is currently taking place in a depth of up to 1,550 m. The technical and economic challenges with the increasing depth and the economic conditions cannot be compared to the beginnings of mining. RAG Anthrazit Ibbenbüren GmbH in Ibbenbüren/Germany operates in an economically and politically very complex environment. The environmental and social requirements have changed, and the occupational safety, health and environmental responsibilities of the company have become much more demanding. The company has faced these increased challenges and acted forward-looking. Dealing with people and the environment is based on the principle of sustainability …


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Tobias Pinkse
Robert Quensel
Alexander Lechner
Dittmar Lack
Axel Stäubert
Heiner Marx
High Yield Potassium Extraction Reducing Impact on Nature (HYPERION) – a Vision into the Future of Global Potassium Extraction and Processing

The global importance of the potassium extraction and processing industry has been significant for over a century and will continue to be in future. Potassium is a vital resource for intensive agricultural land use and as such essential to improve food stock independence and localised food production. For the European Union (EU), the survival of the industry is crucial to retain independence from the main potash producing countries Canada, Russia and Belarus.

A sustainable continuation of the potassium industry that takes the general public view into concern should be established. Its typical challenges, such as risk of surface subsidence, pollution of surface and ground water as well as complex mine abandonment, should be addressed in a new vision of environmentally friendly yet economical potassium extraction and …


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Tuija Mononen
Environmental and Community Impacts of Mining

Local impacts of mining are various and can affect the environment, economics, politics and cultural concerns. All together influence the well-being and every-day life of the local people. Among negative impacts of mining, there are also positives, such as economic growth and wealth brought to the region. This article discusses both, positive and negative effects of mining businesses. The information given refers to a defined mining project in Eastern Finland, the Kylylahti multi-metal mine and the investigation of its influences executed on behalf of the Finnish Funding Agency for Innovation with the project “Preconditions and Tools for Social License to Mine”.


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Michael Hitch
Australia, Leading the Practice in Sustainable Mining

Which, at first impression, the notion of sustainable mining seems to be a paradox due to a limited endowment of minerals, Australia’s mining sector, shines bright to illuminate how mining contributes to sustainable futures. When we think of something possessing sustainable characteristics, we think of something that will continue forever. Mining as a practice or activity on any given deposit is most certainly not sustainable, however a more complex picture emerges where we include aspects of technology and social and environmental are considered.


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Kliment N. Trubetskoy
Sergey D. Viktorov
Alexander A. Osokin
Mining-Induced Generation of Submicron Particles and their Application in Rockburst Hazard Assessment

Researches aimed at gaining an insight into the processes of deformation and failure of materials on a submicron scale that have become of increasingly higher priority in recent years. Destruction of rocks is the integral part of mineral mining processes and directly connected with the generation of submicron size particles at any stage of production. Generation of submicron particles during deformation and failure of rocks exerts aggravating effect on the environment. At the same time, from the experience of laboratory testing, this effect can be used in stress state control in rock masses both under quasi-static and dynamic loading. The accomplished investigation results are the basis for elaboration of a method to monitor and predict hazards …


Order now Mining Report Issue 01_2018 (including this topic)
Read article
Christian Niedringhaus
Tobias Vraetz
Christian Bernet
Karl Nienhaus
Intelligent Telescopic Boom for Underground Scaling

The cooperation between the TML Technik GmbH, Monheim/Germany, and the Institute for Advanced Mining Technologies (AMT)of the RWTH Aachen University, Aachen/Germany, will create a synergy between the innovative construction and design of telescopic arms and the development of intelligent, mining-capable condition monitoring systems. As a result, an intelligent telescopic arm not yet available on the market will be build. A mining-capable system for online load monitoring and condition monitoring of individual machine components has never been used before in any comparable machine. For an optimized design of the new telescopic boom, innovative technical approaches will be applied and evaluated accordingly. The investigation and definition of parameters of the dissolution process will enable optimal and efficient operation in the future. The realization of open communication interfaces, and the definition of standards for data communication in the field of telescopic booms, result in a platform for future emerging industry 4.0 services under the special requirements of mining. Thus, a step towards attaining the goal of what is internationally commonly described as …


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Christel Füllenbach
Smarter Mining – Machine Maintenance by Epiroc

Advances in the operating life and durability of plant and machinery also mean higher maintenance and repair costs due to greater wear and tear. Parts increasingly have to be replaced or repaired as a result. At the same time the true value of the machine will fall as it becomes older. Many companies are therefore repeatedly faced with having to decide whether it is worth repairing a machine or having it overhauled, or instead opting to purchase something new. This kind of problem has a particular impact on efficiency in the mining industry – a sector that requires large machines whose purchase price and operating cost play a crucial role when it comes to economic viability. For this reason further clarification is needed as to whether it is economically more viable to carry out …


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Günther Philipp
From Conveyor Element to Intelligent, Interlinked Operating Assistant: Chains – Smarter and more Reliable with Sensors

Advances in the operating life and durability of plant and machinery also mean higher maintenance and repair costs due to greater wear and tear. Parts increasingly have to be replaced or repaired as a result. At the same time the true value of the machine will fall as it becomes older. Many companies are therefore repeatedly faced with having to decide whether it is worth repairing a machine or having it overhauled, or instead opting to purchase something new. This kind of problem has a particular impact on efficiency in the mining industry – a sector that requires large machines whose purchase price and operating cost play a crucial role when it comes to economic viability. For this reason further clarification is needed as to whether it is economically more viable to carry out …


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Patrick Schneider
Corinna Both
Main Mine Fan “Made in Germany” for the Uvalnaya Russian Coking Coal Mine

There is a new coking coal mine, Uvalnaya, close to the Russian town of Novokuznezk. The Russian company JSC “UK Sibirskaja” operates this mine. The first coal was mined from the first developed working panel in August 2017. It is planned to start mining further seams successively in a two-year cycle. The coal reserves are so big that it is envisaged extraction will continue for a number of decades. In addition, studies and tests have revealed that the coking coal to be found there possesses a number of outstanding characteristics in comparison to other deposits, such as low internal gas pressure. The planning of an efficient ventilation system was of paramount importance for two reasons: to facilitate the underground work carried out in advance for the “Uvalnaya South-West” district, which will be the next to be developed as well as to secure the workplace safety for the miners employed there in future. The planning operations for the complete deposit …


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Iván Valenzuela
Expanding Processing in Chile. A necessary challenge.

Extractive industry is vital for modern civilization, but operations are subject to a number of restrictions centering largely on their negative environmental impacts. This industry is therefore forced to adopt new technologies and processes in order to mitigate factors that drive up costs and threaten profitability. This article sets out to address a key structural factor in the Chilean mining industry – the presence of complex concentrates – and how one of the projects of EcoMetales Ltd., Santiago/Chile, offers a possible solution, with the additional bonus of answering some of the other challenges outlined above.


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Peter von Hartlieb
Learning from China!

The rise of China must be one of the most impressive transformations of our times. And yet many of us fail to comprehend this phenomenon or fully realise the implications of China’s ascendancy, whether in the form of political influence or the impact on world security and the global economy. It therefore cannot hurt to further raise our awareness of these events, especially as China is now actively involved in overseas activities aimed at providing its economy with the fuel it so very much needs. In this regard the regime in Beijing has now also ordered its businesses and expert bodies in China, and Chinese investors abroad, to take into consideration aspects such as sustainability and social justice. China is now the world’s second-largest economic power and operates a clear geopolitical foreign-trade and resources strategy. The Chinese appetite for raw materials …


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Kai van de Loo
Andreas-Peter Sitte
Coal 2017

In 2017 the German coal market suffered a serious collapse and consumption fell overall by more than 11 % to a figure of 50.3 mtce, its lowest level since 1990. By West German standards the decline was the worst since 1945. The slump was mainly due to displacement effects in the power generation sector. Domestic coal production was further reduced as planned in accordance with the political objectives laid down for a socially acceptable rundown of the mining industry, which has now entered its final year. Over the last year coal production and consumption has held steady around the world, though with some reverse trends at regional level.


Order now Mining Report Issue 02_2018 (including this topic)
Read article
Frank Schwarz
Green Energy Generating a new Impetus

The property developers RAG Montan Immobilien GmbH, Essen/Germany, are now planning a series of forward-looking change-of-use projects on some 9,020 ha of company-owned land and properties that were previously part of the RAG corporate portfolio. Proposals for potential new developments also involve schemes based on the use and generation of renewable energies, including the use of solar power, spoil-tip wind and biomass to produce heat energy and electricity. The projects are to be implemented in association with outside partners and investors, starting with local authorities and municipal utilities through to energy supply companies.

All these initiatives have one central aim, namely to safeguard the scientific and technical know-how of the mining industry as a basis for future-proof products and to include the company’s property holdings as part …


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Tobias Reiners
Hermann-Josef Wagner
Nils Penczek
Lisa Altieri
Michael Gross
Climate-Friendly Heating with Heat Utilisation from Mine Water in Post-Mining

With 5.5 million inhabitants, the Ruhr Area is one of the largest urban centers in Europe. In times of the industrialization, the Ruhr Area became an industrial conurbation. The coal mines which are now part of the RAG Aktiengesellschaft, Essen/Germany, provided work.

Due to the underground coal mining in depths of more than 1,000 m, there is an area with several mines and chambers in the underground of the Ruhr Area. Rainwater seeps into the resulting cavities. On the way through the rocks, minerals dissolve in the water. The rainwater becomes mine water. In the past, pumping the accumulated mine water was necessary to protect the active underground tunnels and shafts. In 2018, all coal mines in and around the Ruhr Area will be closed. Nowadays, the most important goal is…


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Oliver Langefeld
Utilisation of Underground Mining Infrastructure as Pumped Storage Power Plant

Pumped-storage power plants are an efficient option for energy storage to address short-term variances. In general, pumped-storages are dependent on high differences in altitude and therefore located in mountainous areas. An advantageous variation is the installation of pumped-storage power plants completely or partially underground. Three variations are feasible: usage of the infrastructure of closed mines, usage of the infrastructure of operating mines, and usage of unexploited rock. Feasibility studies for the installation of pumped-storages in closed and operating mines have been presented and discussed. Pumped-storage power plants are crucial for the restructuring of Germany´s energy system but until they can be economically implemented it is up to the politicians to encourage the realisation of such projects.


Order now Mining Report Issue 03_2018 (including this topic)
Read article
André Niemann
Jan Peter Balmes
Ulrich Schreiber
Hermann-Josef Wagner
Tobias Friedrich
Proposed Underground Pumped Hydro Storage Power Plant at Prosper-Haniel Colliery in Bottrop – State of Play and Prospects

The German coal industry will leave an extensive infrastructure behind when it finally comes to a close at the end of 2018. Mine shafts up to 1,200 m in depth, a huge network of underground workings and extensive water drainage and pumping facilities create real prospects for all kinds of after-use projects. The development of underground pumped hydro storage power plants (UPHS plants) at existing mine sites could provide an answer to the energy storage problem. A collaborative project currently under way seeks to address all the aspects involved on a result-oriented basis and has chosen Prosper-Haniel colliery, the last of the Ruhr mines, as a reference point. The colliery will cease operations at the end of 2018 and with the end of active coal production this site offers prospects for after-use after more than 200 years of mining tradition in the Ruhr.


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Peter Goerke-Mallet
Michael Kirchner
Albert Daniels
New Technologies, new Deposits, new Prospects? Economic and Legal Reflections on Raw Materials

A (post-)mining Germany produces approximately 750 mt of resources per year. The top position is held by the German rock industry with its annual production of approximately 500 mt aggregate (gravel, sand, and stones). It might be difficult to imagine that the rapid development of open data, digitalisation, modern communication systems, driverless cars, smart technology and the Internet of Things might be suffering from a lack of resources in the foreseeable future. But exactly that is the central issue to explore: how secure is our supply and the physical availability of resources?

This essay will be looking at current informations and aspects to develop prospects from those. It will be picking up the deposit potential of former mine workings and landfills and link them with the expertise of the mineral resource industry. Moreover, it will deliver an initial assessment of the legal framework and appreciate current research projects in this field.


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Andy Post
Kent v. Maubeuge
The Use of Geosynthetics in Mining Works

The use of geosynthetics in mining operations grows annually, as mining companies focus on the technical and economic advantages of geosynthetics. These polymeric materials enable more efficient barriers, stronger access roads, space-saving and safety-enhancing retaining structures and much more. This paper presents a summary of geosynthetics in mining works, with a particular emphasis on heap leach pads, tailings management, evaporation ponds and mine closure activities. The benefits of geosynthetics for other applications, such as steeper dams, are also discussed. And most important, the water situation should always be taken into consideration, because quite often we have to operate in a water scarce environment and this reflects the importance of maintaining aquatic ecosystems in a healthy functioning condition.


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Kai van de Loo
The Post-Mining Era – a new Research Programme also for Economics

There is a new industry sector emerging in Germany that concerns itself with the post-mining era. This will very much involve various aspects and issues that will be of interest to the world of economics. While most of the potential solutions being proposed for the tasks and problems arising in post-mining Germany has involved the mobilisation of geological and engineering expertise, a closer examination of the situation, along with an assessment of the challenges that lie ahead, has shown that a number of new economic problems will also emerge that are likely to inspire an economics-based research programme that will include both business management and economics. The following paper will seek to examine this topic further, with special emphasis on the economic issues.


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Walter Frenz
Will Nature Conservation Spell the End of Opencast Mining at Hambach?

Nature protection has now moved onto the agenda for Hambach lignite mine. Environmentalists have set up a camp on the site and the Berlin-based German Federation for Environment and Nature Conservation (BUND) has petitioned for legal protection as an environmental organisation. Can habitat and species protection as part of EU legislation stop lignite mining in its tracks?


Order now Mining Report Issue 03_2018 (including this topic)
Read article
Bernd Pflüger
From Mining Waste to Load-Bearing Support Material?

Underground stowing material has to meet all kinds of divergent requirements. From an economic viewpoint the overall costs should be kept as low as possible, while from a stowing point of view the material as a load-bearing element often has to satisfy very high standards. Moreover, the preference is generally to use discard from the colliery itself, as this will reduce the cost associated with tipping and/or disposal.

The transition from residual waste to load-bearing support material is a complex process that combines support engineering, material technology and process-related elements. These individual aspects will be described in detail in order to explain the basic approach used and to highlight the interdependent nature of the factors involved. The development process is presented using the example …


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Hans-Joachim Engelhardt
Thomas Meyer
Holger Schmidt,
Matthias Heydorn
Jonas Weber
Injection Processes for Rock Salt and Salt Backfill – Tried and Tested Materials and New Developments

According to the classic approach, fissure or pore systems in solid rock or backfill are to be injected with particle-laden, and thereafter particle-free material when a high level of impermeability is required. The suspensions used in the salt and potash mining industries are usually in the form of magnesia binders. Waterglass is also frequently employed as a particle-free injection medium because of its capacity to react with salts and saline solutions to form a solid. Waterglass reacts with magnesium oxide (MgO) and many other substances containing magnesium. This served as a basis for developing a new type of injection medium. Unlike magnesia binders these mixtures move out along their flow paths and force …


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Peter Peschken
Hydraulic Driven Piston Pumps for the Transport of Pastes and Slurries in the Mining Industry

More and more mines are using double piston pumps for conveying pastes, cakes and slurries. Stiff pastes are normally used for the stabilization of underground workings. Cement and ash are added to create a construction material with sufficient strength. For tailings and ore transportation above ground, slurries are produced and transported over long distances to deposits or preparation plants. In this article the author shows various job sites around the world where different materials are pumped, providing the relevant information about the pastes and slurries that were pumped, information about the paste preparation plants, advantages of the paste systems and when to use which type of piston pump.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Olaf Schmidt
Eduard Dorn
Chromite Ore Mining in Kazakhstan – Experiences with Fibre-Reinforced Shotcrete

In the Donskoy Mine GOK in Chromtau/Kazakhstan, the TOO Schachtbau Kasachstan, a joint subsidiary of the German companies Schachtbau Nordhausen GmbH and Thyssen Schachtbau GmbH is driving a roadway in tricky geology with a small cross-section by means of New Austrian Tunnelling Method (NATM). Apart from the application of suitable engineering, the innovative shotcrete with polymer fibre reinforcement and consistent quality assurance in particular contributes towards ensuring that requirements are fulfilled.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Hary Maucher
PERI VARIOKIT in theTunnelling Sector: A Special Application in Formwork Construction

A key indicator regarding the efficiency of formwork systems is their suitability for special applications. More specifically, the cost-effectiveness depends largely on how much the work processes differentiate for different applications and how high the ratio of special components is relative to the standard components of the system. In this context, PERI GmbH, Weissenhorn/Germany, has developed the VARIOKIT, an engineering construction kit that has a high degree of consistency across all types of applications – in terms of its assembly logic as well as the type and quantity of the basic components required.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Bettina Pielka
Part-Automation Makes for Greater Production Efficiency

The RAG-managed Prosper-Haniel colliery in Bottrop/Germany, has some very impressive equipment operating on its high-performance coal faces 1,200 m below ground. These underground workings, where miners have been busy digging out the coal, have been the scene of some rapid technological developments over the last five decades. 50 years ago the only way to find out what was going on down there was to travel down in the cage and see things for yourself. However, advances in information technology have brought about a huge change in the operational processes. This paper will attempt to describe an automation system that RAG Mining Solutions has developed in collaboration with RAG Deutsche Steinkohle with the aim of interlinking the various modules that make up the longwall face installation. This part-automated face installation serves as an effective safety system for the coal winning team and thanks to the computer-supported visualisation of all relevant operating data enables the colliery management to monitor and control the underground operations from a surface command centre.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Heinz-Werner Voß
Highly Effective Mining of Anthracite Coal on the Ibbenbüren Mine

The Ibbenbüren mine produces coal under the special conditions of large depth and low-thickness seams with high methane content with the risk of gas and gas/coal outbreaks. In this essay the path to a modern, high-performance mine under these conditions is described. Special emphasis is given on the roof support and plowing technology (Gleithobel) in view of the development up to the automation, which is essential to increase performance and miners´ safety. Measures for occupational safety, health protection and employee-based improvement processes are presented as essential steps on the way to the high-performance mine.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Christel Füllenbach
Digitisation in the Mining Industry: Networked Machines Making for Greater Efficiency

Industry 4.0 is now being introduced into the mining sector in an attempt to save valuable time and money. This helps speed up the workflow and improve safety standards at mines. The following paper discusses the progress to be made in this area and what is already possible today.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Antje Matthäus
Epiroc Boomer E1C-DH Implemented in a Quarry

Truffer AG, Vals/Switzerland, is a company extracting Vals Quartzite in its own quarry. The material is further processed in Truffer’s factory located in Vals. Founded in 1983, Truffer is now one of the leading stone processing companies in Switzerland. The firm employs 60 workers and fabricates a wide range of natural stone products, which are used for projects around the globe. Previously Truffer only used surface equipment, but since fall 2017 a Boomer E1C-DH of Epiroc, is in the operation for blasting dimension stone blocks. Usually this boomer is used in underground or tunneling operations.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Gerhard Schmidt
Continuing to Add Value Across a Wide Variety of Material Handling Requirements

More than a century after their invention, belt conveyors remain a key element in delivering bulk material to the process and production of products and material that feed the worlds burgeoning economies. The technology has evolved significantly throughout the 20th century and continues developing to keep pace with the demands of the 21st century. Today’s belt conveyor systems are capable of continuously transporting high volumes of material efficiently over long distances and challenging terrains negotiating through curves and rough relief areas. Recent conveyor installations have exceeded 20 km in length and have had multiple thousands of tons per hour in capacity, and up to 25 MW in installed power. Although generally having greater initial capital costs, these systems are able to recover them through significantly less operational costs stemming from the higher quantities of material moved, energy efficiency, reduced labor requirements, higher availability and lower maintenance demands.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Uwe Maaßen
Hans-Wilhelm Schiffer
The German Lignite Industry in 2017

Germany’s domestic lignite output decreased by 0.2 % from 171.6 mt to 171.3 mt between 2016 and 2017. 2017’s extracted lignite had a net calorific value of 52.5 mtce. 153.2 mt, or almost 90 %, of that output were used in utility power plants supplying the general public. This translates into a decrease of 1.3 % compared to the previous year. 14.7 mt were used in the factories of the lignite mining industry for the manufacture of solid products. 2.5 mt were used to generate electricity in mine-mouth power plants. 0.9 mt accounted for other sales of raw lignite and changes in stocks. Lignite’s contribution to Germany’s total gross electricity production amounted to 22.5 % in 2017.


Order now Mining Report Issue 04_2018 (including this topic)
Read article
Elisabeth Clausen
Oliver Langefeld
Helmut Mischo
Carsten Drebenstedt
Ulrich Paschedag
Ludger Rattmann
Studying Mining Engineering in Germany: General Conditions, Locations and Study Programmes

Mining education in Germany has undergone significant changes and development over the past decade. On the one hand, this is due to the changing framework conditions and requirements of industry, science and society. On the other hand, this process has been accelerated by the introduction of a European study reform, also known as the Sorbonne Declaration and Bologna Process. All in all, this has led to an increasing number of study programmes – today there are around 19,000 study programmes in Germany (1) – and the associated increasing complexity. For this reason, this article is dedicated to …


Order now Mining Report Issue 05_2018 (including this topic)
Read article
Elisabeth Clausen
Aline Christina Herz
Aarti Mona Sörensen
Erik Hulthén
Panagiota Papadopoulou
Angela Binder
Juan Herrera Herbert
David Tanner
Michael Försth
Rethinking Mining Engineering Education – Implementation of Conceive – Design – Implement – Operate (CDIO™)

In the context of the fourth industrial revolution, mining is bound to undergo significant changes within the coming decades. Mining in the sense of Mining 4.0 will not only prioritise the efficient, sustainable and responsible use of available resources, but will also be characterised by digitalisation and automation. In order to adapt to those changes and challenges of the future working environments, the requirements and training profiles of future mining engineers will have to adapt accordingly. Founded in 2000, as an initiative between four universities from Sweden and the USA, the CDIO Initiative provides an innovative framework for the conceptual design of future engineering courses. Its superordinate goal is to define principles and standards, so that engineering principles can be combined …


Order now Mining Report Issue 05_2018 (including this topic)
Read article
Angela Binder
Oliver Langefeld
Michael Hitch
Integration of Sustainability in Mining Engineering Education

Since sustainability is an integral part of mining, it is necessary to emphasise the topic in mining engineering education curricula. This article examines selected definitions of sustainability and assesses them with regards to their suitability for educating future mining engineers. Finally, approaches for the integration of sustainability principles and priorities are presented through selected examples.


Order now Mining Report Issue 05_2018 (including this topic)
Read article
Angela Binder
Oliver Langefeld
Helmut Mischo
Elisabeth Clausen
Peter von Hartlieb
Innovative Learning Spaces

The increasing complexity of mining operations results in increasing requirements for the mining engineering education. The demand of broad skills sets in constantly equal sized programs is the reason to blend the addressed skills in teaching and learning activities. A promising approach represents the experiential learning in an authentic environment. The article introduces the challenges in mining engineering education as well as the approach of experiential learning and skill sets. Subsequent, opportunities for innovative underground learning spaces are described using the examples of the training mine Recklinghausen, the research and teaching mine Reiche Zeche and the research and teaching mine Rammelsberg.


Order now Mining Report Issue 05_2018 (including this topic)
Read article
Kian Will
Silja Vendla
Underground Cut-off Grade Optimisation in Narrow Vein Deposits Based on an Innovative Mine Design Algorithm

Cut-off grades are crucial strategic parameters in maximising a mine’s net present value (NPV). As the state of the art underground cut-off grade optimisation approach is very time and resource consuming, this article presents a rapid innovative algorithm-based solution for the given problem. Based on a geological block model and given input parameters, the developed algorithmic approach automates the entire underground mine design and the financial evaluation, ultimately resulting in the identification of the optimum cut-off grade. The key element of the algorithm is the translation of the three-dimensional problem into two dimensions, enabling the usage of Dijkstra’s algorithm for the development design, allowing to compute a single mine design within three to four hours on a standard workstation. Due to the effortless repeatability and the resulting enhanced …


Order now Mining Report Issue 05_2018 (including this topic)
Read article
Ernesto Buholzer Sepúlveda
Simon Mayerhofer
Intercultural Competencies as Success Factor for the Transfer of Technology and Know-how to Chile

The Chilean mining industry is developing continuously. New requirements regarding materials, environment and security issues imply the need for more sophisticated and efficient technologies. Instead of being fabricated in Chile, these technologies are usually imported from abroad. But how can foreign producers make their way to Chile? And how can they identify requirements that are necessary in order to improve non-automated processes? With this article, we want to provide insights into the transfer of technology and know-how from Germany to Chile. In this context, we focus on selected principles about the country as well as current challenges in the Chilean mining sector. The second part will analyze intercultural and change-management concepts and finally discuss possible solutions for supplying companies.


Order now Mining Report Issue 05_2018 (including this topic)
Read article
Detlef Imgenberg
Michael Lemke
Martin Junker
Documentation of Technical Developments at RAG on Examples taken from Coal Winning, Development Works and Logistics

The special geological conditions prevailing in the German coalfields have ensured that the methods and technologies for mining and conveying coal that were developed by the mining companies and equipment suppliers would gain recognition and today be used the world over. The series of books published by RAG Aktiengesellschaft, Essen/Germany, to mark the end of the German coal mining industry, under the title “Documentation of technical developments at RAG”, has set out to preserve the know-how that the German coal industry has built up over the last 50 years, to make this information available to the specialist reader and at the same time to disseminate it to an international audience.


Order now Mining Report Issue 06_2018 (including this topic)
Read article
Jürgen Kroker
A Success Story: Bottrop and the Mining Industry

On 15th December 2016 the Prosper-Haniel roadway drivage team completed the last of Bottrop colliery’s development projects with the final breakthrough into the Haniel-West panel on the 1,240 m level. This would provide access to all the remaining coal that was to be extracted before the mine was finally closed for ever. Prosper-Haniel colliery, with its 1,400-strong workforce, is on course to achieve its target output of 1.9 mt before the mine ceases production at the end of 2018. This is in line with the provisions of the Coal Industry Financing Act requiring the German coal industry to shut down its operations this year. The end of coal mining will bring with it profound changes – not just for the mineworkers but for the entire region. Coal mining in Bottrop can look back over a 160-year history marked by economic dynamism and, more particularly, by technical innovations that would have a profound impact on the industry. Modern equipment paved the way for higher safety standards and increased profitability and the colliery pioneered the introduction of state-of-the-art mining technology.


Order now Mining Report Issue 06_2018 (including this topic)
Read article
Heinz-Werner Voß
Last Shift for the Mine in the deep North – the Ibbenbüren Coal Mining District looks back on nearly 500 Years of History

With the hoisting of the last skip on 4th December 2018, the last chapter of hard coal production at the mine of RAG Anthrazit Ibbenbüren GmbH, Ibbenbüren/Germany, ended, and thus by the end of 2018 the hard coal mining in Germany. Despite all the melancholy, the team has been highly motivated to the last moment and has done his job reliably. All mining objectives were reached ahead of time, the last coal was mined on 17th August 2018. Ibbenbüren coal mining has an extraordinarily long and varied history. Faced with exceptional geological challenges, and in crisis situations, often threatened by closure, the Ibbenbüren miners often performed astonishing pioneering feats in the field of mining. Till today a state-of-the-art coal mine has produced hard coal in Ibbenbüren. This mine has often been a pioneer in the German hard coal mining industry with its numerous technical developments and innovations.


Order now Mining Report Issue 06_2018 (including this topic)
Read article
Gunter Hagen
Stefan Hager
RAG post-2022

The RAG company, which is based in Essen/Germany, has always been known as a coal producing business. However, following the coal-policy decisions taken in 2007 and 2010 this era is set to come to a close at the end 2018 after more than 150 years of coal production in the Ruhr Basin and an even longer history of mining in the Saar and Ibbenbüren areas. This paper describes the services that RAG will still have to provide after 2018 and in addition explains how the company will be constituted and what has been done to prepare for these fundamental changes.


Order now Mining Report Issue 06_2018 (including this topic)
Read article
Michael Weberink
Coal 2018 – the Annual Report of the German Coal Association

The Essen-based German Coal Association (GVSt), formerly known as the Association of the German Hard Coal Industry, was set up immediately after the founding of Ruhrkohle AG in 1968. The aim at that time was to place the German coal mining industry on a new footing after more than ten years of pit closures. The following years were to see all manner of negotiations, initiatives and operational measures, up to and including legislation aimed at bringing about a basic change in energy policy and contributing among other things to the complete closure of the German coal industry at the end of 2018. This paper is a synopsis of the latest Annual Report of the GVSt, which as coal production finally comes to a close in Germany attempts to look back over fifty years at what the Association managed to achieve on behalf of the nation’s mining industry.


Order now Mining Report Issue 06_2018 (including this topic)
Read article
Oliver Langefeld
Martin Tegtmeier
Underground Farming

Mine closure is a topic that is being discussed frequently as illustrated by the closure ceremonies of the last two German deep coal mines in December 2018. Besides the commemoration of the miners, the main question is what is to be done with the underground infrastructure of the abandoned mines? The closure of a mine can be cost-intensive; backfilling of cavities and shafts, and the necessary operation and maintenance of pumping systems, are only a few examples of this expense. Therefore, experts all over the world are researching possible subsequent uses of closed mines. Some interesting ideas for a subsequent use of underground cavities can be found under the keyword “Underground Farming”.


Order now Mining Report Issue 01_2019 (including this topic)
Read article
Martin Junker et al.
Technical Developments at RAG over the past 50 Years

The new series of publications under the generic title “Documentation of technical developments at RAG” aims to preserve the know-how that the German coal industry has built up over the last 50 years, to provide a knowledge platform for specialists in this area and to disseminate this information to an international audience. This initiative may well also inspire engineers to develop new technologies for the future. Of course it would not be within the scope of this series to cover all the individual themes in full along with all the individual features and particularities involved. Nevertheless, the authors have attempted to collate and present all the key relationships that have marked the development of the technotope that is “RAG Mining”, as based on the framework conditions and parameters prevailing over the last 50 years. The following article gives a general overview of the technical development at RAG during the last 50 years.


Order now Mining Report Issue 01_2019 (including this topic)
Read article
Karsten Jaeger
50 Years of Research and Development at RAG

This article aims to lay out the basis of and steps toward the variety of technical developments leading to the current state of technology. It starts with a quantitative overview of the past 50 years of research at RAG Aktiengesellschaft, Essen/Germany, followed by some aspects of the research content, the financing and organisation. This contribution can be seen as a summary of all, whereas the other contributions in this issue will go into further detail with the individual developments and subjects.


Order now Mining Report Issue 01_2019 (including this topic)
Read article
Oliver Langefeld
Ulrich Paschedag
Longwall Mining – Development and Transfer

Longwall mining technology has made significant progress in the last 50 years of German hard coal mining. At the same time, the geological conditions in multi-seam mining where all but favorable, hard coal was mined in the world’s greatest depths in the Ruhr area. At the same time, coal seams had different heights and varying inclinations. Furthermore, they were often geologically disturbed. High support resistance of long-life shield supports, powerful and low-wear face conveyor systems, extremely productive shearers and plough systems and foremost an extremely high degree of underground automation when compared to other markets have helped German longwall mining technology to become the products of choice of customers worldwide. The main steps in product development at RAG, Essen/Germany, since its foundation in the year 1968 will be described hereafter (1).


Order now Mining Report Issue 01_2019 (including this topic)
Read article
Holger Witthaus
Ruhr Area – Strata Control under Challenging Conditions

Main achievements in strata control at German hard coal mines of RAG Aktiengesellschaft, Essen/Germany, are described in this report. Exemplarily it is figured out for the Ruhr area – one of the great hard coal deposits in Europe. After a short review on geological orogenesis the challenges of the deposit will be explained regarding matters of strata control in roadways. From the last 50 years of development, only some fundamental results are highlighted. There are additional attainments of strata control in longwall faces, which are included to the report of technical development in longwall mining. An important restriction of this report is a focus on the last 50 years – so this is not a complete summary of historical retrospection.


Order now Mining Report Issue 01_2019 (including this topic)
Read article
Michael Lemke
Developments in Mine Logistics at RAG

The history of mine logistics at RAG, Essen/Germany, since the company was founded some 50 years ago traces the developments that took place at a wide spread of collieries where multi-seam working was practised on different levels and at different depths. As the overall evolution of this technology is extremely complex it would not be possible here to describe these events in their entirety. For a more complete picture of how logistics developed at RAG refer to the recent publication “Technical developments in logistics at RAG”.


Order now Mining Report Issue 01_2019 (including this topic)
Read article
Martin Wedig
The FAB and the Development on the International Mining and Minerals Markets

The German Federation of International Mining and Mineral Resources (FAB) headquartered in Berlin/Germany is an association of German companies which are active within international mining. Since years FAB promotes the German positions in the global mineral sector and is active in continuous development of German international mining. The ongoing German economic boom requires further investments in order to ensure mid- to longterm minerals supply. In this regard the export of German know-how related to technical innovations and environmentally friendly mining is important. Since 2011 the worldwide exploration activities are on decline. The reason is the very good reserve basis which meets upon a gradually increasing demand situation for minerals. On the other hand the meanwhile increased global mineral consumption, mainly initiated by Asian consumers, may lead to supply bottlenecks in short term.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Felix Lehnen
Sebastian E. Volkmann
Bernd G. Lottermoser
Mirjam Rahn
Peter A. Kukla
Economic Evaluation of Deep-Sea Mining

In view of increasing import dependencies and decreasing ore grades in conventional mining, societies with large resource needs such as those of the EU are looking for new potential sources of mineral supplies. Seabed areas in international waters host considerable amounts of mineral resources that contain various elements, among them metals such as cobalt, copper, nickel and manganese that are used in today’s high- and green-tech applications, e. g., electric vehicles. The EU-funded (FP 7) Blue Mining project has investigated the resource potential of manganese nodules and seafloor massive sulphides. Blue Mining has studied and developed associated exploration methods and mining technologies. This paper gives insights into RWTH Aachen University’s work focussing on the economic relevance of deep-sea mining – both from the markets and the mining perspective.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Franz-Josef Wodopia
Hard Coal 2018

Any attempt to look ahead at the likely economic developments in 2019 must necessarily take into account a number of significant political events, some with potentially disruptive consequences. The first of these would be the trade disputes arising between the USA and other countries, most notably China, the hope being that these matters will soon be resolved. Another no less problematic issue for the European Union is Brexit, where the current negotiations seem at present to point to a less optimistic outcome. There are now fears of a recession because of these threats and because we may well be nearing the end of a long period of growth in many parts of the world. While any assessment of the German hard coal market also has to get an idea of the general economic developments, it is in fact more important to examine how the recommendations of the “Coal Commission” are being implemented at a political level. Looking back we can see that hard coal is already being subjected to disruptive development, to use that now familiar buzzword.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Kai van de Loo
The Coal Exit – a High-Risk Adventure for the Energy Sector and Regional Economy

The recommendations contained in the so called “Coal Commission” roadmap for phasing out coal-based electricity production will oblige the German energy industry and regional economies to embark on an adventure that is the result of climate-policy ambitions that no other sector has yet been asked to engage in. The Duden German language dictionary defines the word „adventure“ as an unusual and risky undertaking of uncertain outcome, an enterprise of an experimental nature that promises to deliver an exciting experience. And this author would argue that this exactly sums up the coal phase-out project. It is in fact rather like the Brexit debate in the UK. While the political decision-makers have a clear picture of what they want to get away from, they only have somewhat idealistic and hazy ideas about what can take its place. Now that the decision has been taken it is time for them to examine, or at least to find out, what kind of practical economic and social impact their decision will cause, and what serious financial implications it will have for the state sector. What is more, the main consequences of the coal phase-out process for the energy sector and regional economies were entirely foreseeable from the outset.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Mirko Liebetrau
Alexey Shalashinski
Michael Suciu
A Tech Company’s View on IoT-Based Condition-Monitoring – Utilizing Web-based Data Assessment Platform and Connected Devices to Improve Machine Utilization and Productivity

Condition monitoring and analysis of mining equipment requires more than suitable and reliable sensor technology, but also a holistic approach that makes use of interdisciplinary capabilities and intelligent software applications. Today, modern sensors consist of hardware and software components and ensure that machine data can be recorded and transmitted at any time. The Internet of Things (IoT) uses innovative software solutions to process the data collected on huge data platforms to make it available as valuable information.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Felix Heinrich
Empirical Evaluation of Application Parameters of Iron-Clay-Buckets

A decrease in output, caused by iron-clay or rather siderite, has been detected on the fifth and sixth floor of the opencast mine Hambach of RWE Power AG, Essen/Germany, since 2005. The material is known as hard to extract, so several special types of buckets were developed and used on the bucket wheel excavator 293. In this summarized diploma thesis the adjusted operating parameters up to now in the area of iron-clay should be verified with the current type of bucket, the iron-clay-bucket. Therefore, systematic trials were conducted locally and evaluated statistically. The increase in output with constant downtime mattered. The output increase especially depends on the protection of the bucket wheel excavator and the following conveyors. In this summary the topic of iron-clay in the opencast mine Hambach is presented first. After that, the empirical verification is described commencing by the design of experiments following by a trial realisation and evaluation. Finally, the results and recommendations for action are shown. An optimization potential can be pointed out.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Rüdiger W. Heinrich
Simulation of Mineral Processing Plants with NIAflow®

Mineral processing plants are complex systems. Their products need to meet certain ridged criteria be it for use as a construction material or for further processing as an ore concentrate. The properties of a material entering the plant however may vary considerably. This is due to the location in the deposit it originates from as well as climate conditions. So one has to cope with varying particle size distributions (PSD’s), moisture content and material contaminations. During its way through the individual processing steps each piece of equipment will contribute to change the material towards the intended final product. Even though processing equipment is usually carefully selected and operated, the outcome is effected by its wear condition and operating setup. With all this influencing parameters it takes a lot of experience to run a mineral processing plant and keep the product within specification limits.
Plant simulation is a great help to achieve this goal. With NIAflow® an entire processing plant can be simulated.


Order now Mining Report Issue 02_2019 (including this topic)
Read article
Isabel Balzer
Markus Roth
Mine Water in the Ruhr Area – Opportunities for the Future

With the end of German hard coal mining in 2018 the dewatering of the mine working is, from a technical point of view, not necessary any more. Therefore new options arise to redesign the mine water management in the post-mining future. The mine water conception of RAG Aktiengesellschaft, Essen/Germany, includes a reduction of the number of dewatering stations, their conversion into well-operated pumping stations and the rebound of the mine water level. Especially with regard to the discharge into streams there is the chance to keep numerous rivers and their tributaries free of mine water. In the Ruhr coalfield, only six out of currently ten dewatering stations are supposed to stay in operation.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Dennis Edelhoff
Jürgen Kunz
Heinz-Dieter Pollmann
Tunnel Construction meets Underground Mining – Special Technical Challenges in Development and Planning of the Mine Water Sewer Ibbenbüren

According to political guidelines the withdrawal from the coal production in Germany took place at the end of 2018 and with this the retreat from the mine site Ibbenbüren of RAG Anthrazit Ibbenbüren GmbH is currently being carried out. In order to fulfil the purpose of eternity of the mine water draining and to reduce operating costs in the long term, the rising mine water is to be captured safely at a defined level and permanently fed to a water treatment system by gravity. In order to fulfil this task a new about 7.3 km long mine water sewer has been projected.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Bastian Reker
Peter Goerke-Mallet
Christian Melchers
Protecting Aquifers from Rising Mine Waters: Managing Mine Water in the Durham Coalfield (UK) and a Comparison with Methods used in Lorraine (France)

When a coalfield finally ceases production there will no longer be any operational requirement to continue with the mine pumping and dewatering operations. Switching off the pumps generally results in an increase in mine-water levels. This process can take place very quickly or may even last several years or decades. Rising mine-water levels are an ongoing event in many places, not only in Germany but around the world, and the public is sometimes completely unaware that they are happening. In the former mining area of South Butterknowle in the Durham coalfield (United Kingdom) an inaccurate assessment of the hydrogeological conditions resulted in mine water and groundwater being mixed together.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Christian Forkel
Sara Hassel
Piercristian Rinaldi
Christian Müller
Restoration of Groundwater Levels in the Rhineland Lignite Basin

When an opencast lignite mine is closed the artificially lowered groundwater essentially has to be restored to its pre-mining level as quickly as possible. This means taking account not only of the impact that mining operations have had on the water landscape but also of any local infrastructural features and housing developments. The various hydrological problems and responsibilities associated with such an operation are presented and discussed below from the perspective of the Rhineland lignite mining area. This paper is an updated version of an article of the same title that was published in Wasserwirtschaft (no. 4, 2017).


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Eckhard Scholz
Doris Mischke
Uwe Steinhuber
Flooding Operations in the Lausitz Area in 2018: an LMBV Report

For the Lausitzer und Mitteldeutsche Bergbau-Verwaltungsgesellschaft mbH (LMBV), Senftenberg/Germany, 2018 was marked by a wide range of activities focused around the planning and implementation of restoration and redevelopment measures, this work being particularly affected by the extreme dry weather, which had an impact on the remediation efforts and on the management of water resources in the Lausitz lignite basin. 2018 was the first year that more water was drawn off from the recently completed LMBV-managed residual lakes and storage ponds than from the region’s river basins. The situation in the residual lakes, where geotechnically prescribed water limits were reached in the Lausitz area, was successfully kept under control by means of an active management regime. The only incident occurred at the Senftenberg public lake where the low water levels caused some slippage on the island. During 2018 work in the Lausitz area continued to focus on developing a hydrological regime that would be as self-regulating as possible.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Juliane Günther
David Hagedorn
Maria Ussath
Marlies Grimmer
Nils Hoth
Understanding of Hydrogeochemical Systems – Findings on Inflow Systems of Opencast Ore Mines and on the Recovery of Valuable Elements from -Tailings or Mine Waters

Mining is not possible without consideration of the component water. This is coupled to a variety of questions. These include, e. g., dewatering in underground and open-cast/pit mining, the post-mining flooding of open-cast/pit residual holes, the remediation of acidic post-mining lakes, general management and treatment of such acid waters (Acid Mine Drainage – AMD) etc. In relation to the above-mentioned aspects, but also for the re-mining of secondary mining bodies (tailings), it is essential to gain a detailed process and structural understanding of the respective site.

Uncontrolled water influxes into open pit mines impair the efficiency of ore extraction and production conditions. Therefore, it is important to understand the inflow system, to detect the sources of these water influxes and so to initiate targeted and effective dewatering measures. The detailed hydrogeochemical investigations of the water inflows and of the potential “source terms” showed that the system is significantly more complex, than toughed in before.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Maik Günther
Christoph Rapp
Mostafa Fallahnejad
Why Underground pumped Hydro Storage Plants despite their Broad Advantages are not built?

As the share of energy generation from intermittent renewable sources increases, energy storages become more important. Among various direct and indirect power storage technologies, pumped hydro storage power plants are known as the only proven large-scale storage technology for more than a century. Pumped hydro storage power plants have many advantages: They have a long service life, can store energy over several hours or days, and have relatively low specific costs compared to other storage technologies. Nonetheless, pumped hydro storage power plants use large areas of land and people are often hostile to new projects. A solution to these problems are underground pumped hydro power plants. However, under the current market environment, their construction is neither economical today nor in the future. Therefore, new policies are required to establish attractive frameworks for this technology in the context of the energy transition.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Stephan Conrad
Making Homes where Collieries once stood

The Essen-based company RAG Montan Immobilien GmbH is currently responsible for the management and development of some 8,750 ha of land comprising its own property portfolio along with real estate owned by the RAG Aktiengesellschaft. Since its founding the company has revitalised another 9,260 ha of former mining land and has developed these locations for various uses, ranging from industrial estates and technology parks, new office locations and residential quarters through to logistics centres and leisure parks. Thousands of jobs and homes too for several thousand people have now been created on these sites, some of which had previously been home to heavy industrial operations. RAG Montan Immobilien has also been focusing efforts on projects associated with the use and generation of renewable energy, this including solar radiation, spoil-tip wind and biomass, which can be used to produce electricity and heat energy.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Thomas Penk
Site Restoration and Compensation and Replacement Measures in the Lausitz Coalfield

One in every two hectares of restored former lignite mining land in Germany is to be found in the Lausitz area, a testament to the skills of mining and restoration specialists. And the active mining industry, in the shape of the current Lausitz Energie Bergbau AG (LEAG), Cottbus/Germany, has played a key part in this work. The company’s remit is to extract and process the indigenous resource and to ensure rehabilitation and recultivation of the landscape after mining operations have ceased. In the course of the last two decades the LEAG has restored nearly 6,900 ha to arable use. Any attempt at compensating for an industrial incursion into the natural environment must ensure that the affected land is restored in as effective a way as possible – which means shaping a sustainable, economically viable and secure post-mining environment. This paper will provide an update on the Lausitz approach to developing a post-mining landscape – one that will obviously be based on the status before industrialisation but without seeking to replicate the land in its previous state of development and cultivation.


Order now Mining Report Issue 03_2019 (including this topic)
Read article
Elisabeth Clausen
Aarti-Mona Sörensen
What is High Performance Mining? A Discussion

Fluctuating commodity prices, high upfront investment costs, long development periods, the high variability due to the uniqueness of each deposit, and the imperfection and uncertainty of information about mineral reserves even after mining commences, have always been challenges for the mining industry. However, in addition to those inherent challenges, today’s new deposits have increasingly complex geological formations, are at greater depths or in climatically and/or geographically partly inaccessible and remote areas. With regard to socio-economic conditions, mining today is confronted with increased requirements. The technological transformation in mining also brings with it changing demands on the employees and an increased need for qualification. In this context of profound changes in the socio-economic context, available technology and the imperative of increasing productivity, it seems an immense task to define a clear course for the future considering that the future itself is uncertain.


Order now Mining Report Issue 04_2019 (including this topic)

Read article
George Hemingway
Aarti-Mona Sörensen
High Performance Mining Today and Tomorrow – A Conversation with George Hemingway

George Hemingway leads the Innovation Practice for Stratalis, a New York-based growth strategy consultancy dedicated to helping companies to become future-focused and to develop the foresight, flexibility and focus to win in uncertain markets. Through his Seven-Lenses technique, he helps companies to outperform others by facing the future in a focused and guided way.
Aarti-Mona Sörensen is a scientific research assistant at the Institute for Advanced Mining Technologies at RWTH Aachen University. In 2018, she was a leading part in the organization and implementation of the first International Conference on High Performance Mining at RWTH in Germany with 175 professionals from over 20 different countries.


Order now Mining Report Issue 04_2019 (including this topic)
Read article
li H. Beyglou
Aarti-Mona Sörensen
Elisabeth Clausen
Håkan Schunnesson
Improving Productivity Performance in Aitik: An Insight into the World’s most efficient Mine

Declining ore grades and increasing extraction costs have given a high priority to productivity in operational mines. However, improving productivity in an industry with decades long plans and budgets requires a certain level of agility. Boliden´s Aitik open pit copper mine in Northern Sweden has been through a long journey to reach the title of world’s most productive open pit copper mine. This article discusses the different factors contributing to the success of Aitik, from long-term strategic planning to incremental and short-term adjustments and from implementing and integrating new technologies to tackling “the human factor”.


Order now Mining Report Issue 04_2019 (including this topic)
Read article
Michael Suciu
Sebastian Kowitz
Digitizing Raw Material Mining – End-to-End Integration into an IIoT Platform for the Analysis of Machine Data

Using machine data and related software to identify unproductive downtimes, recognize foreseeable faults and errors or initiate suitable preventive measures, the challenges in mining remain unchanged. Many of these tasks can be mastered with the use of digitalization. However, digitalization has many dimensions that need to be considered in order to implement a holistic and target-oriented solution. This applies above all to the IoT-platform, the platform of the Internet of Things, on which interconnected hardware is linked with appropriate analytics software for machine data.


Order now Mining Report Issue 04_2019 (including this topic)
Read article
Joel Fuchs
Christel Füllenbach
Epiroc Control Tower – The Digital Mine in Action

The recently by Epiroc developed Control Tower is a central data processing and automation unit. The Control Tower is much more than a showroom – it is part of Epiroc’s strategy to support customers in taking the right steps in terms of security, productivity and improvement. Epiroc’s High-Tech Control Tower allows remote-controlled and automated machines to be explored and controlled anywhere in the world. In addition, the control tower incorporates Epiroc information management solutions such as data processing via telematics or other integrated systems. Thus, the new Control Tower is a great opportunity to help customers digitize – by joining several cutting-edge technologies.


Order now Mining Report Issue 04_2019 (including this topic)
Read article
Kai van de Loo
Social Engineering for Coal Mine Closures – a World Bank Report, the International Research Deficit and Reflections from a German Perspective

At the end of 2018, just before the Katowice Climate Change Conference, the World Bank published a special report entitled “Managing coal mine closure: achieving a just transition for all” (1). The stated aim of the report was to provide governments and regions confronted by extensive colliery closures, whether for reasons of climate policy or due to other factors, with practical assistance for the“social engineering” of such closure processes in order to prevent or at least minimise any associated economic distress and social tensions. As experience has shown that the large-scale closure of coal mines will have a significant and negative socio-economic impact on the employees and communities involved, the World Bank report states that a proactive, state-supported closure management initiative with regional and socio-political flanking measures is needed to achieve a socially fair transition for all concerned. These measures will be directed mainly, though not exclusively, at those developing and emerging countries that currently have an active coal mining industry (2). The World Bank will be basing its efforts uniquely on an international in-practice comparison of the coal sector and can draw on a rich …


Order now Mining Report Issue 04_2019 (including this topic)
Read article
Uwe Maaßen
Hans-Wilhelm Schiffer
The German Lignite Industry in 2018

Germany’s domestic lignite output decreased by 5.0 Mt, which equals 2.9 %, from 171.3 Mt to 166.3 Mt between 2017 and 2018. 2018’s extracted lignite had a net calorific value of 51.0 Mtce. 148.2 Mt or almost 90 % of that output were used in utility power plants supplying the general public. This translates into a decrease of 3.3 % compared to the previous year. 14.6 Mt were used in the factories of the lignite mining industry for the manufacture of solid products. 2.5 Mt were used to generate electricity in mine-mouth power plants. 0.9 Mt accounted for other sales of raw lignite and changes in stocks. Lignite’s contribution to Germany’s total gross electricity production amounted to 22.5 % in 2018.


Order now Mining Report Issue 04_2019 (including this topic)
Read article
Frank Charlier
Comparative Survey of International Repository Projects

In 2011 the Federal Republic of Germany decided that it would completely phase out nuclear power by the end of 2022. However, nuclear energy continues to be developed at international level and this means the ongoing generation of radioactive waste. While many different disposal and storage solutions have been implemented around the world to deal with low and intermediate-level radioactive waste, there are as yet no final disposal facilities in operation for high-level radioactive waste. Nonetheless, the expectation is that in the course of the next ten years repositories will start operations in Finland, France and Sweden. Concrete plans and projects have also been developed in many other countries in the search for suitable sites for building repositories and initial decisions have been taken for a potential repository design. It can therefore be expected that somewhere in the region of 15 to 20 repositories for high-level radioactive waste will be in operation between the end of the current decade and the final years of this century.


Order now Mining Report Issue 05_2019 (including this topic)
Read article
Hans-Joachim Engelhardt
Disposal of Radioactive Waste in Germany – An Overview of Ongoing Projects

In the field of radioactive waste disposal, a particularly wide range of mining activities has to be carried out using state-of-the-art technology and high safety standards. This is especially true when a broad range of objectives is persued under different site conditions, as is the case in Germany. If the focus is on waste with negligible heat generation, the Konrad project is an example of the conversion of a mine into a repository, which requires extensive reconstruction, expansion, conversion, and complex securing of shafts and drifts. The Morsleben repository, on the other hand, is currently being kept open and work on decommissioning the repository is progressing vigorously. A focal point is the design of the sealing structures. They, as well as backfilling measures for stabilisation, are indispensible for the long-term isolation of the radionuclides from the biosphere. In the Schachtanlage Asse II, these precautionary measures are routine tasks to protect the emplacement chambers (radioactive waste) from saline solutions and to stabilise the mine workings. To arrange for the retrieval of the radioactive waste, extensive exploritory measures are carried out within the framework of the so-called fact finding survey. The progress and success of these projects is a primary corporate objective of the Federal Company for Radioactive Waste Disposal (BGE), Peine/Germany. It is supported in these projects by its subsidiary, BGE TECHNOLOGY GmbH.


Order now Mining Report Issue 05_2019 (including this topic)
Read article
Tino Rosenzweig
Wilhelm Bollingerfehr
Christin Dieterichs
Maxi Herold
Wolfram Kudla
Matthias Reich
Deep Borehole Disposal of High-Level Radioactive Waste – Results of the Project CREATIEF

Currently, more than 30 countries throughout the world use nuclear energy to generate electricity. Almost all countries contemplate how to safely store and dispose of radioactive waste in the long term. Repositories for low- and intermediate-level waste of various designs have been in operation throughout the world for decades. In 2015, Finland was the first country, however, that obtained a license to construct a repository for spent fuel elements. In Germany, the disposal of heat-generating radioactive waste and spent fuel elements in a mine was favored from the very beginning. With regard to safety and licensing aspects, a mine solution was considered to be the most feasible of the disposal options.
However, in several other countries, other disposal options have been considered. One of these considerations is the disposal of spent fuel elements in “deep boreholes”. Within the scope of the research project CREATIEF (Investigations on the opportunities and risks of the disposal of heat-generating radioactive waste and spent fuel elements in deep boreholes, funded by the Federal Ministry for Economic Affairs and Energy, project numbers: 02E11526A and 02E11526B), “deep boreholes” were considered to be boreholes with a depth of 3,000 to 5,000 m from ground level where the emplacement area is located in crystalline rock. This article gives an overview of the results of the research project CREATIEF. He has undergone a peer review process.


Order now Mining Report Issue 05_2019 (including this topic)
Read article
Jens Köhler
Lutz Teichmann
Matthias Heydorn
Paul Eric Wolff
Application of Sorel Concrete for Barrier Construction and Cavity Stabilisation at Schachtanlage Asse II

Schachtanlage Asse II is a former salt and potash mine that was taken over by the Federal Government when production came to an end in 1965. Between 1967 and 1978 low- and medium-level radioactive waste was placed there in underground storage chambers on behalf of the German Government. However, current information indicates that the long-term safety of this waste material will be compromised due to a number of factors, including the extended lifetime of the storage chambers, the inadequate distance between them and the overburden and the undersized structural design of the load-bearing components. The concern is that this will result in geomechanical degradation and that an inflow of solution from the overburden rock has been taking place since 1988 or even before (1). Given the current state of knowledge long-term security can only be guaranteed by the retrieval of the radioactive waste and indeed this became a statutory obligation in 2013. As an escalation of inflow into the mine workings cannot be entirely ruled out, extensive backfilling and sealing measures are being carried out below ground as an emergency precaution in order to provide a sufficient degree of security for the planned retrieval operation. The backfilling measures are designed both to stabilise the supporting system and to enclose the storage areas for the radioactive containers. This will help avoid …


Order now Mining Report Issue 05_2019 (including this topic)
Read article
Walter Frenz
Continuing Liability and Distribution of Responsibility for Radioactive Waste – and after Coal Phase-Out

Final disposal site mining is mainly characterised by the transfer of the responsibility for the disposal to the Disposal Fund. But apart from that, the energy companies remain responsible – without any option of being released from liability. This continuing responsibility is laid down in the German Continuing Liability Act (Nachhaftungsgesetz). Is there also a continuing liability for the mining industry in light of the coal phase-out?
This article is a continuation of the author’s comments in Frenz, W. (ed.), Atomrecht, 2019.


Order now Mining Report Issue 05_2019 (including this topic)
Read article
Deutsch-Russisches Rohstoff-Forum
Russia is interested in Cooperation with German Companies

Alexander Shokhin is President of the Russian Union of Industrialists and Entrepreneurs (RSPP), Moscow/Russia, the most important representatives of the Russian economy and counterpart of the Federation of German Industries (BDI). In an interview with the German-Russian Raw Materials Forum (DRRF), Freiberg/Germany, the former Minister of the Russian economy explains the measures taken by the Russian government to promote digitisation at state level and how important cooperation with German companies is to him. At the same time, he stresses that ecology and environmental protection are now high priorities for the Russian economy.


Order now Mining Report Issue 05_2019 (including this topic)
Read article
Angela Binder
Alexander Hutwalker
Oliver Langefeld
Modern Mining Engineering Education Transforming Towards the Digital Era

During the last decades, a transformation in various fields influencing education can be observed: Learning habits change, e. g., due to substantial changes in the channels and media used to acquire information. Teaching alternatives become broader and digital and follow these changes. Graduated profiles need to address 21st century skills for the work beyond the 4th industrial revolution.

The transformation and its effects need to be implemented as well in a modern mining engineering education overcoming the deriving challenges and benefitting from the opportunities. Hence, the question that needs to be raised is how to design and implement functional curricula and courses for future-proof mining engineers.


Order now Mining Report Issue 06_2019 (including this topic)
Read article
Sabine Backus
RWTH Aachen University – Raising the Profile of the University’s Degree Courses on Energy and Natural Resources

About 900 students have enrolled on the Specialist Group for Raw Materials and Waste Disposal Technology (FRE) at RWTH Aachen University, Aachen/Germany. This is the young talent whose know-how is now very much in demand both in Germany and around the world. With its Bachelor’s Degree course “Sustainable Resources and Energy Supply”, its Master’s courses on “Sustainable Energy Supply” and “Raw Materials Engineering” and its proposed Master’s Degree course on “Sustainable Underground Utilisation” RWTH Aachen University is very well positioned to teach about sustainable and responsible strategies for raw material and energy supply and to undertake research in these thematic areas. The main focus of the courses in question is on conservation of resources, sustainability and environmental compatibility.


Order now Mining Report Issue 06_2019 (including this topic)
Read article
Jürgen Kretschmann
Ludger Rattmann
Empowerment Teaching: A 7-Phase Model to Secure an Effective International Know-How Transfer in Engineering Education

International know-how transfer is the basis for reaching scientific excellence jointly all around the world. But: How can we transfer our know-how effectively from country A to country B? What are the prerequisites especially in applied sciences like engineering?

Having given numerous lectures around the world during the last 15 years, the authors are convinced that participatory teaching methods can be an ideal answer to this question. The main aim is to empower the learner to meet the challenges of the future in theory and in practice. Participatory teaching methods enable the learner to develop knowledge, skills and attitudes. They are very useful to overcome cultural barriers between the lecturer and their students. This can create a win-win situation for both sides.


Order now Mining Report Issue 06_2019 (including this topic)
Read article
Philipp Hartlieb
Luis Jordá Bordehore
Vitor Correia
Manuel Regueiro
Jelena Vidovic
Boris I. Malyukt
Introduction to the EU H2020-Project International ­Network of Raw Materials Training Centres (Intermin)

The H2020-Project INTERMIN commenced in February 2018. Its goal is to create a feasible, long-lasting international network of technical and vocational training centres for mineral raw materials’ professionals. Specific objectives of the project are to develop common metrics and reference points for quality assurance and recognition of training and to create a comprehensive competency model for employment across the primary and secondary raw materials sector. INTERMIN is also introducing an international qualification framework for technical and vocational training programs. This is based on present and future requirements by employers, to facilitate joint international training programs and to optimize future interaction and collaboration in Europe and internationally.

This paper introduces the goals and objectives of INTERMIN. Furthermore, it highlights the benefits of the project to future students, professionals and academia and presents ways to contribute and interact with this project. It has undergone a peer review process.


Order now Mining Report Issue 06_2019 (including this topic)
Read article
Rudrajit Mitra
Bekir Genc
An Example of a University-Industry Collaboration to Undertake Focused Research

The School of Mining Engineering (Wits Mining) at the University of the Witwatersrand (Wits), Johannesburg/South Africa, has a long history of Mining Engineering education, being the oldest and largest on the African continent. Wits Mining has signed a Memorandum of Agreement with one of the largest gold mining companies in the world with a common commitment to education, research and innovation in South Africa. Both parties agreed to further research and develop the field of mechanised mining and rock engineering. This paper reflects on the process that was undertaken for this and the procedure in place for the success of this collaboration. It has undergone a peer review process. The paper was held at the 30th SOMP Annual Meeting and Conference which took place from 29th June to 5th July 2019 at the TH Georg Agricola University in Bochum/Germany.


Order now Mining Report Issue 06_2019 (including this topic)
Read article
Kirstin Kleeberg
Carsten Drebenstedt
Mining in German School Education – Status and Developments

In fact, schools are not enviable – a large number of studies indicates a continuous criticism. The comments range i. e. from a poor performance in basic subjects such as mathematics to an inadequate preparation of school leavers for vocational training and suitability for STEM-subjects. Thus, this article follows a further examination of the school-based approach. The central question which is focussed now is what is intended for mining in basic education. Due to the fact that all 16 federal states in Germany have their own curricular, they all were analysed concerning differences and similarities. This investigation is part of a PhD thesis at the TU Bergakademie Freiberg, Freiberg/Germany, on the public awareness of raw materials.


Order now Mining Report Issue 06_2019 (including this topic)
Read article
Michael Weberink
Kai van de Loo
su_spoiler title="GVSt 2019 – Annual Report" style="default" open="no"]

The Essen-based German Coal Association (GVSt) has once again published its Annual Report, with the 2019 edition reporting on Year One of the post-mining era. This latest report covers the main themes and activities associated with the work of the Association in this sector during the twelve months in question. What follows is a summary account of all those sections of the new GVSt Annual Report that are of relevance for the post-mining industry. The complete version of the 2019 Annual Report is available for downloading on the Association’s website at www.gvst.de. This opens with an introduction by the new GVSt Chairman Michael Kalthoff, CFO at RAG Aktiengesellschaft, and includes a guest contribution by Joachim Rumstadt, Board Chairman of STEAG GmbH, discussing what structural change has to deliver in the Ruhr area, along with sections dealing with the national and international coal market, industry statistics, labour and social legislation, collective bargaining, social self-management and the GSA initiative (“Together for a social working world”) that is being promoted jointly by the coal industry and the regional churches. The Report also lists all the colliery closures that have taken place in Germany from the industry’s record year of 1957 to the final year of coal production 2018.


Order now Mining Report Issue 06_2019 (including this topic)
[/su_spoiler]
Read article
Johann Uys
Ronny Webber-Youngman
A 4.0D Leadership Model for Mining and Related Industries in the Context of the 4th Industrial Revolution

The mining industry of the 21st century needs a new kind of leader as certain leadership styles currently employed in South Africa are not sustainable. This paper explores the historical leadership styles that are now outdated (with specific reference to the South African mining industry, but in many ways also applicable to other countries) and proposes a different approach in dealing with future leadership-related challenges. One of the main aims among others, is therefore to start a broader discussion pertaining to the proposed new model that is discussed in this paper. Questions are postulated to explore leadership that can balance the leadership styles of the past – business acumen with technical capability on the one hand, and personality on the other hand – with increased intuitive discretion, a “feel” for people and the future, and the ability to deal with complexity and to make timeous decisions. Also to build organisational and industry resilience through the leadership characteristics identified.


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Violetta Sokoła-Szewioła
Jan Palarski
Assessment and Prevention of Rockbursts Hazard in Polish Hard Coal Mines

Mining exploitation can, under certain conditions, cause the occurrence of tremors and rock bursts in rock excavations. In most of active hard coal mines in the region of the Upper Silesian Coal Basin, seams that are classified as threat by rockbursts are exploited. Despite the restructuring changes in the Polish hard coal mining industry, and hence the limitation of coal extraction, there is no significant reduction in the total seismic energy of the recorded tremors. This threat belongs to the most dangerous natural hazards in Polish coal mining, in particular due to the fact that the depth of exploitation increases, and thus the mining and geological conditions deteriorate, which promotes the occurrence of increased seismic activity induced by exploitation and rockbursts. The article presents the methods of assessment of rockbursts hazard used in Polish mines …


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Helmut Mischo
Bernhard Cramer
New Mines in an old Mining District – Opportunities and Challenges of the 4th Mining Boom in the Ore Mountains Region

With the end of 2018 and the closure of the last two collieries, industrial hard coal mining in Germany came to an end. Unknown to most, at the same time metal ore mining in the Eastern part of Germany is booming again, with a large number of metal mining projects in different stages of realization and some mines even under construction. This article gives not only an overview over the current situation – 4th mining boom („4. Berggeschrey“) – but focusses on the tasks and challenges of setting up new mines in a densely populated and highly industrialized country in the heart of Europe like staffing, mechanization and automation, health and safety, environmental protection, and the minimization of the ecological footprint.


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Thomas Ahlbrecht
Sinking of two Shafts on a Potash Deposit in Belarus with the most recent Shaft Boring Roadheaders: ­Conceptual Design and First Practical Experiences

The Republic of Belarus has a history of some 60 years of intensive mining for potash, which has always been exclusively executed by the government-owned company Belaruskali. Six working mines exist up to now. However, in 2016, the private-owned company Slavkaliy commenced the construction of a new mine, named Nezhinskiy Mine, located nearby the city of Soligorsk. The planning of this green field project from 2011 primarily intended the sinking of two freeze shafts using conventional drilling and blasting. Then, in 2016, Slavkaliy decided to conduct the sinking with a new type sinking technology: mechanical advance of the solid with machines designed by Herrenknecht AG, Schwanau/Germany.


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Henk van Muijen
Tobias Vraetz
Mine Tailings Management: Integrated Solutions for Re-Handling and Re-Processing

Tailings deposits are found everywhere in the world that has ongoing or legacy mining activity. These man-made deposits present both a challenge and can represent an interesting economic value source, if the still interesting constituents of such tailings resources can be economically and effectively recovered. The value of such deposits has only recently become increasingly of interest, and is based on the realization that many tailings facilities hold mineral grades comparable with competing virgin deposits and/or minerals, particularly in cases where virgin ore quality is deteriorating caused by factors like grades and/or liberation particle sizes.


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Martin Wedig
The German Overseas Mining Sector and its Future Prospects

Major German companies with true mining expertise are regrettably a rare commodity these days and Germany’s overseas mining sector is now mainly in the hands of mid-sized enterprises. It is also worrying to see the monopoly position that China now occupies in the global raw materials market, both on the supplier and on the consumer side. On sober reflection it must be said that Germany has become largely insignificant as a primary raw materials producer on the international mining stage. And this is a market that has also changed. Germany’s dependence on imports of raw materials is steadily growing and a transformation is already taking place as regards the actual structure of commodity imports. There has been a dramatic reduction in the amount of energy resources being imported – due in no small measure to the impact of the German energy transition …


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Martin Wedig
Africa: A Continent of Opportunity for Raw Materials Recovery

Africa is a continent with enormous potential and the second fastest growing economic region after Southeast Asia. Mining is now carried out in over 100 countries around the world. Over 50 of these can be described as “mining countries”. These are countries in which mining products account for over 6 % of exports and are therefore of great national importance, not least because they create new job opportunities for the population. Over 90 % of mining countries are developing countries and most of these are in Africa. Given the increasing global population and growing material demands ….


Order now Mining Report Issue 01_2020 (including this topic)
Read article
Philipp Hensel
Jürgen Kugel
Tassilo Terwelp
Jörg Tuschmann
Long-Term Management of Mine Water Operations in the German Coalfields – an Interim Evaluation of the Findings Based on Operating Plans and Hydrological Permits

The cessation of coal mining in North Rhine-Westphalia on 31st December 2018 marked the start of a period of long-term aftercare measures. The end of coal winning also meant that the original purpose of the mine dewatering operations, which was to make it possible to extract the resources in the first place by collecting the mine water and pumping it to the surface, no longer applied. This raises the question of whether and to what extent the dewatering measures should be continued, both for safety reasons and in the interest of environmental protection. It was with this in mind that the RAG Aktiengesellschaft, Essen/Germany, submitted its Mine Water Management Plan in 2014. This concept is now being implemented step by step – subject to the granting of the required permits and approvals – with the aim of ensuring that the quantities of mine water to be pumped to the surface long term are kept as low as possible …


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Patrick Malejka
Benjamin Röhl
The Casing Pipe Method of Converting Mine Water Pumping Stations to Well-Type Operation Based on the Example of Carolinenglück 3 Shaft

The northwards migration of the coal mining industry created a well-developed network of underground roadways and this allowed interconnected collieries to be organised as combined water drainage systems. This resulted in a centralisation of the water pumping operations. The mine water is currently pumped to the surface at a total of 13 pumping stations – RAG Aktiengesellschaft, Essen/Germany, has long-term plans in place to reduce this to six. In order to achieve this target RAG is now engaged in a revision of the entire water management system. Instead of the conventional method of underground pumps, as used as present, RAG intends to withdraw from the underground workings entirely and to raise the mine water to the surface through a series of well pipes. Two different techniques will be employed for this operation, depending on the character and condition of the mine shafts in question …


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Benjamin Röhl
Dieter Hardes
Explosion-Proof Casing-Pipe Obturator with Flap Valve Mechanism

Optimising the mine de-watering arrangements involves converting the centralised drainage systems to water wells. In order to retain access to the mine water a series of casing pipes has to be cemented section by section into the filling column. These pipes can then be used at some future date to accommodate a number of submersible pumps. In view of the fact that gases can be released both from the abandoned mine workings, which are no longer being ventilated, and from the coal-bearing rock beds, there is a real risk of an explosive gas mixture being developed as the casing pipes are being installed and during the cohesive backfilling operation within the shaft. Because of the potential danger this poses, and in order to maintain a safe working environment inside the shaft during the construction phase, each column of casing pipe has to be provided with an explosion-proof seal at its lower end. This pipe obturator also has to be designed in such a way …


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Carsten Linka
Dieter Hardes
Development of a Concreting System Based on the Climbing Formwork Concept for the Partial Filling of the Friedlicher Nachbar Shaft

The Friedlicher Nachbar shaft in Bochum is one of the 13 central water pumping stations operated by RAG Aktiengesellschaft, Essen/Germany. One of the unusual features of this installation is that the operation to convert to a well-type system has to be carried out without switching off the pumps in the auxiliary ventilation shaft as any such shutdown would result in an increase in the mine water levels. This would lead to a transfer of water into the adjoining water management zones, something that must be avoided at all costs. Because of ongoing pumping operations the conventional method of partial backfilling using the casing pipe method could be used. What is more, the significant lack …


Order now Mining Report Issue 02_2020 (including this topic)
Read article
André Vervoort
Long-term Impact of Coal Mining on Surface Movement: Residual Subsidence versus Uplift

It is well known that longwall mining leads to a significant amount of surface subsidence. This is driven by a mechanical stress-deformation process that is initiated when the roof collapses in the mined-out area. Since entire coal basins recently have been closed in Europe, the focus has moved more to the long-term impact of mining. In various European coal basins, it has been observed that, after the mines were closed, there was a period of further residual subsidence, followed by upwards movement or uplift, which is linked to the flooding of the underground work areas. Based on data obtained by remote sensing techniques, this paper shows for the western part of the Campine coal basin that the average rates of residual subsidence and uplift are of the same order of magnitude in absolute terms. However, the spatial distributions of the residual subsidence values and the uplift values are different …


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Stephan Conrad
New Prospects

The landscaping of the State Garden Show 2020 in Kamp-Lintfort and the concomitant on-time clean-up and preparation of the area for future uses that are required are some of the special challenges facing RAG Montan Immobilien GmbH, Essen/Germany, which has been sustainably revitalising closed mining sites for more than 40 years. The park area of the State Garden Show on the former mining site of West colliery, which is in close proximity to the city’s centre, will be turned in future into the “Central Park” of Kamp-Lintfort.


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Jürgen Kretschmann
Research Areas in Post-Mining

The Research Institute for Post-Mining (FZN) at TH Georg Agricola University (THGA) in Bochum/Germany, has developed an integrated approach to meet the challenges of the post-mining era. Therefore, post-mining covers four research areas: Perpetual tasks and minewater management; Geomonitoring in post-mining; Material science for the preservation of industrial heritage; Reactivation and transition.

The institute is trying to fulfill central requirements of the UN to deal responsibly and sustainably with the resources of our planet. It plans to be a part of a national and international network in the interest of all social groups and the environment.


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Kai van de Loo
New National Raw Materials Strategy: No Sustainability without Inclusion of Post-Mining

The goal of the German government’s new national raw materials strategy is to confront current and foreseeable future challenges in securing raw materials for the German economy and in particular for the German industry from 2020 onwards. Issues of sustainability will be given greater priority than in the first raw materials strategy from 2010, and for the first time aspects relating to post-mining will also be addressed. However, post-mining needs to be given much greater weight if the requirement for sustainability in the raw materials strategy is to be satisfied. Thus, Germany can set an example internationally and offer perspectives by referring to national practices and projects for a sustainable management of post-mining effects and in particular the consequences from phasing-out coal mining. It can also contribute to improving acceptance of the raw materials policy on a national level.


Order now Mining Report Issue 02_2020 (including this topic)
Read article
Franz-Josef Wodopia
Hard Coal 2019

The year 2019, just as the previous years 2017 and 2018, was a very poor one for hard coal in Germany. Electric power generation using hard coal was down by 31 % in 2019. Over the three years 2017, 2018 and 2019, cumulative power generation from hard coal fell by 49 % in comparison with 2016, i. e. by half. So the de facto exit from coal has been going on for a long time. If it were only a matter of reducing CO2, there would have been no need to make any decisions to phase out the generation of electricity from hard coal. Nevertheless, hard coal-fired power plants make an important contribution to supporting the expansion of renewable energy sources and to stabilising the electricity system. To prove this scientifically …/p>
Order now Mining Report Issue 02_2020 (including this topic)

Read article
Aarti Sörensen
Karl Nienhaus
Elisabeth Clausen
Smart Mining – Today and Tomorrow

Digital technologies offer the potential to deliver significant improvements by improving the quality and availability of data and informations, which in turn can be the key to significant productivity gains. In addition, meaningful digital technologies can help to reduce the environmental impact. It is therefore assumed that digital technologies have the potential to be the key to the sustainability of the industry or at least to enable significant improvements. The future of mining is “smart”. However, as is often the case with popular slogans, the exact meaning is becoming increasingly fuzzy. Therefore, this article provides an overview of smart mining as a term, concept and global trend.


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Amanda Truscot
Culturing Innovation in Mines

Technologies already exist to begin addressing some of mining’s biggest problems, but all too often, attempts to innovate yield disappointing results. It is not enough to build great strategies and hire bright people; to fully leverage what technology can offer, mines need to address fundamental issues with culture. This article discusses how to foster the curiosity, courage, communication, collaboration and diversity that culturing innovation requires.


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Tobias Wendel
Ralph Baltes
Elisabeth Clausen
Sustainable Intelligent Mining Systems (SIMS), one Step Closer to the Mine of the Future

Today, every company involved in raw material extraction strives to work efficiently and effectively. In the article “Smart Mining – Today and Tomorrow” in this issue, smart mining and its implications have already been described and discussed in detail. The central challenge, according to one of the key statements of that article, is the actual implementation of what is understood by Smart Mining, i. e. the “what” and “how” in day to day operations. The “what” is the question of which technologies are required and best suited for which specific use cases. The “how” is about the integration of the technology into the existing processes of the respective mine. It is important to test the technologies to be used comprehensively in order to be able to evaluate their advantages and disadvantages and thus to enable a better presentation of the use case. Such comprehensive testing …


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Stefan Vöth
Potential of Modelica for the Creation of Digital Twins

Digitalization is on path of fast development in all spheres of society. As an outcome the requirements on modeling of systems are increasing. This applies with regard to quantity and quality. In this context the tools for modeling have to be selected. Considering modeling a possible choice is the language “Modelica”. This language comprises different advantages, finally supporting safe use and effective reuse of already developed components. Especially Modelica is an efficient approach to model acausal interaction between objects, which practically occurs fairly in every system, e. g., in technical systems typical for mechanical engineering. The text comes with possible views on the term “digital twin”, which seems not to be defined exactly. It continues with Modelica, its properties and advantages for the creation of digital twins. Summarized the text should give some support to get acquainted, to evaluate and to decide on the usage of Modelica.


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Christoph Klötzer
Niklaos Christou
Julia Ridder
DMT – “Digital Mining Transformation” for the Raw Materials Industry

In recent years, the ongoing digitalization of mining has led to continuous changes in the way the raw materials sector explores its resources, carries out mining operations, processes the products and ultimately delivers them to its customers. This article illustrates the Mining 4.0 concept of the DMT GmbH & Co. KG, -Essen/Germany, which is based on the three pillars of “operations”, “people”, and “processes” and which covers digital transformation in a holistic way throughout the entire life cycle of the raw materials industry.


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Tobias Krichler
Helmut Mischo
Thomas Wilsnack
Data Acquisition for Underground Mining Applications

Automation in all its aspects has been gaining in significance in the extractive industry and decision making in today’s mining sector is based as much on planning activities as on event-driven reactions. This means that machinery and sensor networks are increasingly required to gather data on individual operating modes and ambient conditions, this information then being transmitted to a mine control station for interpretation and analysis. For the mining industry measures of this kind have the potential to optimise planning and mining operations from a geological and technical perspective. The European Horizon 2020 research project “Real-Time Mining” comprises a consortium of 13 European partners who will be collaborating together on sensor-based updatable resource models for direct production control in real time. TU Bergakademie Freiberg’s involvement focuses on the development of a mine control room suitable for small and medium-sized mining companies. The university is also working …


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Christopher Kühlbach
Mirko Liebetrau
Toyga Ozver
Efficient Raw Materials Production with IIoT – Inefficiencies in Mining

Efficient use of the available assets plays an important role for the economic viability of an operation in raw materials production. Nowadays, most planning and investment decisions are still only using experience and test data collected at the start of an operation as decision support. A comprehensive data collection using the Industrial Internet of Things (IIoT) not only allows to reveal inefficiencies in the overall operation, but can create transparency for everyday production processes and makes it possible to turn assumptions into actionable insights.


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Fabian Borrmann
Christian Behrens
Optimisation of Ore Milling Processes Using On-line ­Particle Size Distribution and Solid Content Analysis

The particle size distribution of ground minerals is of decisive importance for downstream processes like flotation, separation, drying or others. In order to optimize process efficiency on one hand and final product quality on the other hand, early control of the grinding or classification stage is essential. The ultrasound-based particle size analyser OPUS of Sympatec GmbH, Clausthal-Zellerfeld/Germany is capable of performing on-line particle size distribution (PSD) and solid content measurement of mineral slurries such as iron ore, copper ore, fluorspar, quartz sand and alumina directly in a tough process environment. OPUS provides a 31-size class PSD and can be applied for …


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Martin Wedig
International Mining Remains the Bedrock of our Industry

Given the ongoing corona crisis this is perhaps an appropriate moment to examine what is happening in the overseas mining sector in these uncertain economic times. The German economy continues to require increasing quantities of raw materials, a demand that simply cannot be met from indigenous sources. Moreover, Germany will also be faced with logistical difficulties if the shutdown that has been imposed both at home and in the supplier countries continues for any length of time.


Order now Mining Report Issue 03_2020 (including this topic)
Read article
Martin Wedig
To the Acceptance of Mining

In our society there is a lack of acceptance for domestic mining. From the former glorification of technical skills, today an environmental hype has developed which condemns any intervention in nature, regardless of whether it is necessary or not. Measures for mining, for the environment and for the preservation or creation of good living conditions are therefore required. The solution is for mining and the environment to think together without any ifs and buts.


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Peter Goerke-Mallet,
Tobias Rudolph,
Jürgen F. Brune
Jürgen Kretschmann
The Importance of “Social Licence to Operate” for the Mining Life Cycle

At the Annual Conference of the Society for Mining, Metallurgy and Exploration (SME) in February 2020 in Phoenix, Arizona/USA, the debate on the term “Social Licence to Operate” was a focus. The title of the keynote session of the annual conference was: “The Executive’s Role in Tailings Management: Preserving our Social Licence to Operate”.


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Steffen Kautz
Approval Procedures Under Mining Law – Legal Framework and Practical Challenges

Projects for the extraction of raw materials are often at the focus of public attention. This does not (any longer) concern solely the large opencast lignite mines, but is more and more true as well of other opencast mines such as larger and smaller wet gravel pits or quarries and even small dry mining projects. The “power of public opinion”, often exploited by the opponents of a project, can prompt approval authorities or specialist authorities, e. g., nature conservation authorities, to issue especially high requirements for documentation during the approval process and demand particularly thorough and elaborate expert assessments to secure their position vis-à-vis opponents of the project and to protect themselves from possible lawsuits.


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Reinhard Reißmann
Frank Schmidt
Aspects of Nature and Species Conservation to Enhance Public Acceptability of Approval Procedures for Opencast Mines

Nture and species conservation play an increasingly important role in approval procedures for mining developments and their acceptance by the public. This has led to an increasing amount of technical statements in approval procedures led by the -mining authorities. In contrast to other development projects, mining creates a succession of special – usually short-term – habitats, starting without vegetation and moving through a series of highly specialised vegetation landscapes. These plots are an important retreat within the intensively used (agri-)cultural landscape. Thus, an opencast mine attracts rare species that later lead to conflicts …


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Valeriy Grishin,
Konstantin Kolikov
Natalia Udalova
Natalia Lubenska
Problems and Prospects of Using Ash and Slag Waste in Russia, Taking into Account European Experience

Taking into account the energy balance trends, there is an urgent need for ecologization of coal-fired generation. The paper discusses the development of legal frame base in the field of ash and slag waste management. The main provisions of the program “Energy Efficiency and Development of Energy”, contemporary challenges and threats to the environmental safety of the Russian Federation according to the “Strategy for the Environmental Safety of the Russian Federation for the Period until 2025” and the current situation in the field of generation and processing of ash and slag waste have been analyzed and compared with the world praxis …


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Rainer Fimple
Martin Isaac
Stefan Mengede
Bernd Linder
Risk Management Plan for Abandoned Mining Infrastructure

As part of its Risk Management Plan for Abandoned Mining Infrastructure Arnsberg District Government, through its Department for Mining and Energy in North Rhine-Westphalia (Mining Authority of NRW), Dortmund/Germany, is responsible for conducting searches and surveys of disused mine shafts, with support and repair work then being carried out where necessary. This Risk Management Plan is now proposing to include near-surface cavities and water-bearing tunnels and adits as part of this programme. In order to develop its “Risk management strategy for near-surface mining cavities” in the Ruhr coalfield the Mining Authority of NRW requires the best possible information on the outcrop …


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Uwe Maaßen
Hans-Wilhelm Schiffer
The German Lignite Industry in 2019

Germany’s domestic lignite output decreased by 34.9 Mt, which equals 21.0 %, from 166.3 Mt to 131.3 Mt between 2018 and 2019. In 2019 extracted lignite had a net calorific value of 40.6 Mtce. Almost 88 %, or 115.0 Mt, of that output were used in utility power plants supplying the general public. This translates into a decrease of 22.4 % compared to the previous year. The sharp decline in power generation from lignite was primarily caused by the transfer of additional power plant units into a secure and reliable standby mode for backup purposes, the substantial increase in power generation from wind energy and natural gas, the production shortfall in the open-pit mine Hambach as well as …


Order now Mining Report Issue 04_2020 (including this topic)
Read article
Linda Erbsmehl
The Mobile Winder SBN FH-55 and the Development of the SBN FH Series

Top priority of occupational safety is precautionary measures and the avoidance of accidents. But fast, innovative and, above all, well-prepared rescue measures are just as essential in mine rescue. The rescue concept for each shaft provides an auxiliary hoisting for men rescue in case of emergency. Mines with shafts located at a greater distance from each other, have to provide an auxiliary hoisting system for each shaft. Such an auxiliary hoisting system was developed as part of a bachelor thesis in cooperation with …


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Thomas Ahlbrecht
Rehabilitation of Shafts – Current Examples of Executed Solutions on Salt and Potash Mines

Due to the shaft itself and the use of the shaft specific conditions arise for the rehabilitation of old shafts. The shaft construction companies have to face these circumstances again and again when planning and carrying out the work. Almost always the influences of water and/or rock pressure determine the day-to-day work of these companies. Three case studies of shaft rehabilitation carried out by Redpath Deilmann GmbH, Dortmund/Germany, thereof partly in joint ventures are presented in this article.


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Torsten Rabe,
Sebastian Voigt
Reconstruction and Qualification Work at Konrad 1 Shaft

The Federal Society for Final Storage (BGE) based in Peine/Germany is commissioned to convert the former Konrad iron ore mine into a repository for low to medium level radioactive waste. The following report deals with the reconstruction and renovation of Konrad 1 shaft including three shaft stations at 3rd, 4th and 5th level, shaft hoisting systems and the headframe including guide frame. During this work, the operational readiness for men riding and material haulage has always to be guaranteed with at least one shaft hoisting equipment.


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Ulrich Hoischen
Flame Resistant Hydraulic Fluids – Requirements and Test Methods

In many areas where hydraulic fluids are used, it is important to minimize the fire hazard that can be caused by hydraulic fluids. Whether in steelworks and power stations or in machine tools or underground mining, it may be necessary to use hydraulic fluids with improved fire engineering properties, so-called flame-retardant hydraulic fluids, in order to prevent the formation and spread of fire. These properties must be tested and certified by independent test laboratories. Therefore, standards for testing these properties were introduced, which have since created a high level of safety. In fire and explosion protection, it is the major events that startle us and lead us to issue new rules or to rethink and, if necessary, adapt existing regulations. The most famous Roman city fire of 64 A.D., which affected 14 districts of Rome, e. g., led to the establishment of the first organized fire department and the setting up of night watches.


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Joachim Brandt,
Erwin Kunz
Categories of Gas Outbursts in Hard Coal Mining from a Practical Point of View

The term “gas outburst” is in use worldwide for a variety of types of sudden emission of big volumes of mine gas, at which a differentiation concerning the causes of their occurrence is not carried out in many cases. As a consequence, it is often not possible to analyse the causes of these events in the different mining regions in the world, and to compare the effectivity of measures for controlling the dangers. Based on the findings and experiences in German hard coal mining the authors consider selected gas dynamic events exemplary, and propose a new classification of the gas outbursts in categories. Physical parameters and operational characteristics that can be observed in connection with the events are mainly used for the definition of the categories.


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Thorsten Koth
Physically Preventing Dust Emissions at Conveyor Belts and Belt Transfers

Many solutions have already been developed to prevent dust emissions at special sections of conveyor belt systems and at transfer points. All measures taken for this purpose serve to protect the people working in the surrounding area, to keep the production environment clean and often to provide explosion protection. However, most of the classic dust prevention methods also involve risks and side effects such as increased wear and tear, causing plant operators to face different problems. Against this background of many years of experience, ScrapeTec Trading GmbH, Kamp-Lintfort/Germany, developed AirScrape, a system that does not have any wear-increasing flaws. It also has a triple positive effect by keeping fine dust particles in the conveying area, reliably preventing spillage and – since it works without belt contact – virtually eliminating maintenance work.


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Andrea Benedetti,
Sergej Pahl
Enhanced Safety and Efficiency through Active Light

The demand for raw materials is increasing worldwide. The reasons are a growing world population and the resulting increase in energy requirements. Mineral or metallic raw materials are needed for an increasing number of electronic devices such as mobile phones, headphones and batteries. The global energy transition also will not make progress without rare earth elements or metals such as aluminum, iron or copper. The market potential is enormous and so is the importance of open-pit mines through which these raw materials are extracted. Mine operators are faced with challenges in terms of safety and productivity. Open-pit mining is often carried out, with notable intensity and in regions with seasonally low levels of daylight. This places special demands on the protection of switching and supply lines. Faulty or defective cables in open-cast mines often can lead to unexpected downtimes of the equipment still to this day. The Excellence Center for Special Cables of the Prysmian Group in Germany has solved this problem with the actively illuminated TENAX-LUMEN cable.


Order now Mining Report Issue 05_2020 (including this topic)
Read article
Rolf Bracke
Thermal Energy Transition with Geothermal Energy: From Coal Mining to Heat Mining

The coal phase-out in Germany by 2038 constitutes a major challenge for regions and industries. Technologies, energy sources and labor markets are changing fundamentally. But there are also opportunities for local actors that are worth to be explored. Even old mines could contribute to the success of the transition of energy production. The German Parliament installed the Fraunhofer Institute for Energy Infrastructures and Geothermal Energy (Fraunhofer IEG) as a contact point for the necessary application-oriented research in the regions that are most affected by structural change.


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Katharina Schätzler
Judith Bremer
Eva Schill
Thomas Kohl
Michael Kühn
Olaf Kolditz
Ingo Sass
GeoLaB – The Geoscientific Future Project for Germany

Geothermal energy can play an important role in the decarbonization of the German energy system. In order to make the great potential of geothermal energy in the crystalline basement economically viable, measures are taken to enhance existing permeable structures. However, a prerequisite for the public acceptance of such Enhanced Geothermal Systems (EGS) is the minimization of possible induced seismicity. Their control can only be based on an understanding of the processes and interactions of the fluid with the reservoir. With the generic underground laboratory GeoLaB (Geothermal Laboratory in the Crystalline Basement), fundamental questions of reservoir technology and borehole safety of EGS are to be investigated. The planned experiments will significantly improve our understanding of the relevant processes in the …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Ernst-Günter Weiß
Renewable Geothermal Energy – Latest Developments in Geothermics in North Rhine-Westphalia: New Finds. New Projects. New Research Facilities.

Geothermal resources have huge future potential and could well replace much of our fossil-fuel and nuclear based heat and electricity supplies. Geothermal energy is climate neutral and is available all year round. However, it presents significant technological challenges and is highly capital intensive. This applies both to near-surface geothermics and, more especially, to deep-level geothermal operations, where deep wellbores have to be drilled at enormous cost. Any expansion of geothermal exploitation over the years has therefore been very much dependent on the prevailing project funding conditions.


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Johann Goldbrunner
Geothermal Energy Utilisation in Austria

By late 2020 a total of 77 deep geothermal wells had been drilled within the territory of Austria, representing a cumulative length of some 135 km. About two thirds of this figure, both in terms of number and cumulative length, comprised boreholes sunk in sedimentary basins, while the remainder were drilled in the Eastern Alpine units and consisted exclusively of wells intended for balneology and spa tourism. At the end of 2019 the installed capacity of deep geothermal systems amounted to 95 MW, to which can be added an estimated 10 MW for balneological systems. This total output of around 105 MW …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Rudolf K. Fruhwirth
Herbert Hofstätter
Clemens Langbauer
Gernot Schwaiger
The Impact of Geothermal Energy on Natural Gas Production

Natural gas is besides from crude oil and coal one of the most important energy resources. However, during the depletion of a reservoir, the occurrence of liquids, e. g., water, condensates, is a well known phenomenon worldwide. Depending on the gas composition and the physical boundary conditions (pressure, temperature), water and/or condensate can precipitate out of the gas stream as the gas cools down and liquid loading of the well occurs when the gas flow is lower than a critical velocity. In order to optimise the gas production and for better understanding the liquid loading problem, a method has been developed that enables the simulation of the fluid temperature …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Berthold Kibellus
The Innova Rig 418 Deep Drilling Rig – A Successful Model for Producing Geothermal Wells?

The aim of this article is to provide an overview of the main stations of the Innova Rig Terra Invader 418 drilling rig from Herrenknecht Vertical GmbH, Schwanau/Germany, and its positioning on the national and international geothermal market since it was launched. The main features, advantages and benefits of the drilling rig are discussed, such as, e. g., sound protection during operation incorporated into the design, “hands free” technology, the small footprint as an important factor …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Walter Frenz
The Current Legal Framework for Geothermal Drilling

Geothermy is a raw materials production process and therefore it has a close association with mining law, unless the activity in question is strictly property related. However, even in this latter case mining regulations will take effect if the drilling extends to a depth of more than 100 m. A general operating plan is not in fact required in this instance and a main operating plan is deemed to be sufficient, this is to be accompanied by special operating plans if further drilling is to be carried out. Mining subsidence liability is not explicitly prescribed …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Anna Borg
Acceptance of Deep Geothermal Energy – Communication as Crucial Factor

Energy from deep and near-surface geothermal energy sources can make a significant contribution to the energy transition in Germany. In contrast to solar and wind energy, however, geothermal energy as a renewable energy source has yet to stake out a significant position in the general public’s awareness. Geothermal projects often run into opposition from a critical public. Reports are characterised by negative headlines, concerns about risks that are difficult to assess and incalculable costs. Moreover, energy policies are often marked by uncertainties concerning the future role of geothermal energy as part of the energy mix. Exploitation of the opportunities arising …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Stefanie Walter
Kai-Jannis Hanke
Opinion Leaders in the Digital Age – Social Network Analysis for Renewable Energies on Twitter

Evaluating opinions, sentiments and relationships within groups become increasingly easy due to wide availability of data on social media platforms. This article discusses aforementioned aspects for a Twitter network consisting of 37,760 German tweets related to renewable energies which were collected for the year 2019. Besides identifying the most frequent words like energy revolution, CO2, power, Germany and coal, this paper also evaluates the reach and importance of specific tweets and individuals. While the follower count …


Order now Mining Report Issue 06_2020 (including this topic)
Read article
Kai van de Loo
Julia Tiganj
Employment Stimulus for Post-Coal Mining Regions

The decision to phase out coal in Germany – and not only there –with the corresponding loss of added value and jobs in coal production and use raises the question of how sufficient new employment stimuli can be created for the regions of the coal industry in the post-coal-mining era. The federal government’s answer is the billions set aside by the law for structural support for coal regions, which was passed parallel to the energy policy realisation found in the Coal Exit Law and provides around 40 bn € in financial aid from the government until 2038. Primary focus of the act is on government infrastructure measures. It is less mindful of the need for direct incentives …


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Julia Tiganj
Jürgen Kretschmann
Kai van de Loo
Tobias Rudolph
German Post-Mining as a Role Model for Developments in China

Due to the recent announcement by the Chinese President Xi Jinping to become carbon neutral by 2060, China is facing a major upheaval. Because in China, power generation is the largest consumer of coal and remains a major future source of energy. In the upcoming age of renewable energies and climate protection, the transition to a more sustainable energy supply system has already begun. Therefore, the coal mining industry in China has currently reached a phase of stagnation. This implies an accelerated role of post-mining and includes the integrated understanding of the mine cycle, and the effects considered. Main challenges are …


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Peter Vossen
Temuulen Purevdorj
Khangai Gerelsukh
Backfilling and Securing of Abandoned Small-Scale Coal Mines with Coal Combustion By-Products (CCBs) Generated at Power Plant Sites and with Domestic CCB’s Generated at Ger District Sites

Mongolia is heavily dependent on coal due to its energy sector. During the last decades in the power plants and the households of the capital city, Ulaanbaatar, coal has been burned from the mines of the subbituminous coal deposits of Nalaikh, Baganuur and Shivee-Ovoo. The calorific value of this subbituminous coal is comparatively low, it contains huge amounts of different ash types, the so-called coal combustion by-products (CCB’s). Mongolian power plants generate more than 800.000 t/a of CCB’s. CCB’s are mainly fly ash, bottom ash and boiler slag. CCB’s are generated by thermal power plants and …


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Karl-Heinz Wennmohs
Trackless Loading and Transport Technology for Underground Mining

Underground ore mining, as currently practised around the world, would be unthinkable without trackless vehicles. This technology was first introduced into the mining industry on a trial basis some 60 years ago and its market potential has continued to grow in the intervening years. This can be attributed to the growing international demand for raw materials and also to the gradual transition from large-scale open-pit extraction to underground mining. This organisational structuring has created mines whose production rates are now comparable with that of the big opencast sites. These underground mines have been driving the innovation development …


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Michael Prenner
Alternative Transfer Chute System

In practice bulk material transfer chutes for belt conveyors often cause problems. Depending on the bulk material to be conveyed, the chutes are often subject to severe wear, which minimizes the durability of the chutes and expensive wear protection material is often replaced at very short intervals. The wear also relates to the belt conveyor downstream of the chute. If the bulk material is strongly braked when it hits the belt, the kinetic energy of the bulk material is converted into particles and belt wear. Eccentric belt loading processes caused by transfer chutes can also often be observed.


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Gord Susinski
Mining in the Heat

Effective lubrication can help mining operators achieve greater efficiency and lower running costs. But in the sector’s notoriously tough, hot conditions, there are several environmental challenges to consider and overcome when choosing and administering a grease. From equipment variations, to high loads, searing temperatures and possible contamination, there is a lot to think through before seasons are considered. How far should an operator think about the seasonality of their operation? And what are the optimum timings for doing so? This article will find out.


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Benedikt Wöhrl
Ivan Akinshin
Lothar te Kamp
Yewgeni Yakunchikov
The Use of Numerical Simulations in Longwall Coal Mining

Numerical simulations provide a cost-effective way to plan and optimize a longwall. In this study numerical simulations are used to identify the necessary support pressure and the maximum distance between shield support and coal face in a target coal seam. The stress state, as well as the subsidence and the excavation damage zone in the hanging wall of a longwall panel are determined. Based on the excavation damage zone, the groundwater barrier of the target seam is analyzed.


Order now Mining Report Issue 01_2021 (including this topic)
Read article
Kai van de Loo
Jürgen Brüggemann
Post-Mining Research on Reactivation and Transition

The Research Center of Post-Mining (FZN) at the TH Georg -Agricola University (THGA) in Bochum/Germany has significantly expanded the range of its research programme since 2019/2020. Its scope has now been broadened by the new research division “Reactivation and Transition”. Research in this division focuses on land development and regional policy, socio-economic aspects and governance of post-mining. Emphasis is less on natural science, geosciences and engineering and more on economics and geography, spatial planning and political issues related to post-mining, although the work in the research centre has inter-disciplinary ties to the aforementioned disciplines. The following article provides an overview of the current work in this research division as well as the directions the research will take in the foreseeable future.


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Houmao Liu
Lothar te Kamp
Ivan Akinshin
Alexey Kulminskiy
Maxim Tishkov
Assessment of Remedial Options for Sustainable Operation of the Mirny Mine

The Mirny Mine is located in the northern Russia, where arctic conditions are present year-round. It is a large, open-pit and underground diamond mine with an open-pit depth of approximately 500 m below ground surface and a current depth of the underground mine workings of approximately 900 m below ground surface. From the ground surface, shallow geologic units with approximately 350 m thickness are generally under permafrost conditions. The key water-producing unit is C12ic. This unit is at a depth of 237 to 515 m below ground. It consists of limestone with extensive sets of fractures and has high salinity. The aquifer is the main source of groundwater to the open pit and underground workings. The mine is currently flooded because of the failure of the crown pillar. Studies were conducted to assess the options of remediating …


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Christian Brendenahl
Harald Dippe
Walter Hermülheim
Heiko Petrasch
Roman Preißler
Directory of Mine Rescue Works Updated by the German Committee for Mine Rescue Services

Since summer 2019, an ad hoc group of the German Committee for Mine Rescue (Deutscher Ausschuss für Grubenrettungswesen – DA GRW) has been discussing several unanswered questions regarding the equipment of the mine rescue brigades currently active in Germany. The following questions were to be answered:
• Are there any supply gaps regarding the standard equipment of the mine rescue brigades, and how can no longer available equipment be substituted?
• Are there still any mines that might be impacted by rare, major incidents in the future such as wide-spread fires, explosions, gas eruptions, water inrush, etc, and have the necessary precautions been taken?
• Regarding rare, major incidents, such as confinement within the mine, this work aims to be concluded in an updated, national directory of mine rescue works, which lists specialists and equipment. The final draft has been finished and is to be passed at the 2021 general meeting of the DA GRW.
Each of the four German Centers for Mine Rescue Services has issued a risk assessment within their field of care concerning the above-mentioned questions. In addition to the underground mines …


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Helmut Mischo
Frank Reuter
Stefan Pötzsch
Andy Tauber
Optimization and Enhancement of Mine Rescue Services in Saxony

In recent years and decades, structural change has taken place in all German mining regions. In general, it can be said that the old-established, large-scale coal and ore mines have been closed down or have moved from an active extraction phase to rehabilitation mining, combined with a corresponding reduction in the number of employees. At the same time, we are seeing a significant rise of mechanisation at many small and medium-sized underground mining companies which is also having an impact on the number of employees and their qualifications. This development is also visible in …


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Alexander Hutwalker
Angela Binder
Oliver Langefeld
Occupational Safety and Health and its Consideration in Higher Education

Safety is the highest goal in a mining operation due to its responsibility towards the involved persons as employees but also in terms of the society. Furthermore, economical risks are closely related to unsafe working standards enhancing the severity of incidents. The mentality for safe and aware behavior needs to be set for all internal stakeholders of mining activities and thus needs to be included in the Engineering education. This paper presents, based on the aim of occupational safety and health …


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Jens Kegenhoff
Possible Effects of Dusts and Harmful Gases on Fans

Fans provide artificial air movement in mines. They are assigned to different applications. Whilst the main fans provide the total fresh air requirement for the mine workings, auxiliary fans provide pressure increases or relief and support the total ventilation system. Special fans form part of the primary haulage framework to bring fresh air to the workplaces and the working face. But often the application is not so simple and needs to fulfill a much more complex set of criteria than just “clean” and “fresh” ambient air. These criteria demand equipment that is designed …


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Manfred Müller
Hard Coal 2020

The Coal Importers Association (VDKi), Berlin/Germany, will be celebrating 125 years of association history in 2021. The year 2021 also marks the first year of implementation of the measures that will put an end to coal-fired power generation. Despite the difficulties caused by the current coronavirus pandemic, the energy industry has proven its ability to maintain supply lines; deliveries to the power plants and blast furnaces have never been at risk even these days of Covid-19. This report looks at the current and future functions of the Association, gives a brief overview …


Order now Mining Report Issue 02_2021 (including this topic)
Read article
Britta Lindner
Martin Isaac
Using Remote Sensing Data for Various Operational Tasks at the NRW Mining Authority

The NRW Mining Authority in Dortmund has been employing remote sensing data as part of its operating remit for quite a number of years. Orthophotographs and laser scanning data have been used by the NRW Geobasis services for basic survey purposes since the start of the millennium and after 2011 these techniques were also applied as risk management tools for surveying abandoned mine sites. During this second decade radar interferometry also proved to be a useful technology, e. g., zero-edge problems when recording ground movements over wide areas. In 2018 the NRW Mining Authority joined in a project that had been set up by …


Order now Mining Report Issue 03_2021 (including this topic)
Read article
Sven Petersen
Progress in Marine Mineral Resource Research and Assessment – A German Perspective

In a world with a growing population the need to achieve climate policy goals as well as the UN sustainable development goals, prima-ry mining for raw materials will continue in the coming decades. In the long term, recycling of metal stocks and a circular economy represent the most promising and responsible solutions and will help to eliminate the environmental and social impacts caused by mining. However, the metal quantities needed for this purpose are not available due to their long-term use. Companies, politicians, and the media are therefore discussing possible substantial contributions from the oceans to meet the future demand for metallic raw materials, for reasons of security of metal supply.


Order now Mining Report Issue 03_2021 (including this topic)
Read article
Sunny Schoone
Maximilian Getz
Elisabeth Clausen
Detection and Differentiation of Sand Content in Hydraulic Transport using Acoustic Emission Technology

Deep-sea mining represents an opportunity for an alternative supply of high-tech raw materials. A concept for the extraction of polymetallic nodules from the seabed envisages the use of a harvester that extracts the nodules using a hydraulic principle. To design an effective and efficient mining process, the composition of the material flows must be continuously monitored. A promising technol-ogy for this task is the Acoustic Emission (AE) technology, which has already been successfully used for material flow characterisation of aggregates transported by belt conveyors. In the scientific investigations …


Order now Mining Report Issue 03_2021 (including this topic)
Read article
Johannes Post
Verena Schreiner
Leonhard Weixler
The “Vertical Approach” – a Sustainable Solution for Deep-Sea Mining and Sampling

The discovery of Seafloor Massive Sulfides (SMS) occurred in the Galapagos Rift area in 1977. A few years later, the former German mining company PREUSSAG AG started with the exploration of these newly discovered mineral resources followed by a first harvesting campaign of 30 t of massive sulfides collected with big TV-controlled grabs. In contrast to conventional mining concepts the “Vertical Approach“ method takes the three-dimensional conic shape of the SMS deposits into consideration, where the deeper portions of the deposit are getting more and more narrow. This approach is very selective and minimizes the recovery of lean ore rock material …


Order now Mining Report Issue 03_2021 (including this topic)
Read article
Dieter Schleuter
Michael Sniehotta
Exploration of Shaft Asse 5 and the Recovery Mine – Further Exploration of Salt Dome Asse Eastern of the Existing Mine

According to a comparison of options regarding mine closure of Asse II mine, issued during 2009/10 by the Federal Office for Radiation Protection as the former operator, the best option is to retrieve the radioactive waste stored underground between 1967 and 1978 firstly before mine closure. This additionally would achieve for approval of long-term safety. In 2013 the retrieval of radioactive waste received legal foundation through § 57b (Lex Asse) of the Atomic Energy Act. Due to enormous geo-mechanical stress of Asse II mine, a new shaft Asse 5 as well as underground development work will be necessary for the retrieval process that is assumed to last several decades. Both, shaft Asse 5 as well as the new underground mine, are planned to be developed eastern of the existing mine. Since 2013 exploration drillings and geophysical investigation are in operation in this area.


Order now Mining Report Issue 03_2021 (including this topic)
Read article
Mathias Bauer
Thomas Neu
Erdenebaatar Byamba
Geothermal Energy in Mongolia

Mongolia is a country rich in resources that faces many challenges in order to meet the requirements that were set in the Paris Agreement. The supply of electricity and heat for the cities, which are growing due to rural depopulation, specifically the capital Ulaanbaatar, is largely based on coal combustion in predominantly outdated power plants without flue gas purification systems. While the potential of renewable energy for generating electricity and heat is substantial, they are only seldomly used. Due to the low temperatures in Mongolia, the supply of space heating is particularly important. In view of its economic situation, it is to be evaluated …


Order now Mining Report Issue 03_2021 (including this topic)
Read article
Kai van de Loo
Ongoing Post-Mining Deficiencies in Raw-Materials Policy and the Repurposing of Mining Infrastructure

The Research Center of Post-Mining (FZN) at the TH Georg Agricola University (THGA) in Bochum/Germany has significantly expanded the range of its research programme since 2019/2020. Its scope has now been broadened by the new research division “Reactivation and Transition”. Research in this division focuses on land development and regional policy, socio-economic aspects and governance of post-mining. Emphasis is less on natural science, geosciences and engineering and more on economics and geography, spatial planning and political issues related to post-mining, although the work in the research centre has interdisciplinary ties to the aforementioned disciplines. The following article provides an overview of the current work in this research division as well as the directions the research will take in the foreseeable future.


Order now Mining Report Issue 04_2021 (including this topic)
Read article
Ludwig Möhring
Ulrike Drachsel
Christoph Wehner
Björn Knudsen
Thorsten Diercks
Martin Wedig
Positions and Demands of the German Extractive Industry for the 2021 National Election in Germany

Raw material extraction in Germany is in need of support to ensure a secure, responsible and sustainable supply of raw materials. The entire range of raw materials must be considered. The coronavirus pandemic has clearly revealed just how important it is to have a secure supply of products from within our own country. Germany is independent of imports, above all with respect to the products relevant for the system that are produced here.


Order now Mining Report Issue 04_2021 (including this topic)
Read article
André Jakobs
How Long Can Mining Operations Still Afford not to Automate? – An Assessment

Mining, like other branches of industry, has experienced the fourth industrial revolution in recent years. The transformation process from mechanized to automated raw material extraction has begun worldwide. Despite major initial challenges, some early adopters are already benefiting from the great potential of digitization and automation in mining and are one step ahead of their competition. Companies that do not follow this trend will find it difficult in the long run to keep up economically with the pioneers of this future technology.


Order now Mining Report Issue 04_2021 (including this topic)
Read article
Nils Ehringhausen
Gregor Schweppe
Lothar te Kamp
Ivan Akinshin
Numerical Simulation of Shaft Sinking Using the Artificial Freezing Method

A potash mine in Kaliningrad, Russia is to be developed. Two shafts are planned to be sunk to extract the potash deposits in approximately 1,100 m depth and for general mine operation. Demanding lithological layers, namely alternating clays and floating sands combined with high pressure aquifers in large depths pose challenging circumstances for the sinking of the shafts. To overcome these, the freezing method was chosen to improve the mechanical properties of the local geologies and to stabilize the pressurized aquifers. ITASCA Consultants GmbH, Gelsenkirchen/Germany, has been asked to perform the numerical analysis of the freezing process. The objective was to investigate…


Order now Mining Report Issue 04_2021 (including this topic)
Read article
Leonard Krebbers
Ramil Gainov
Bernd G. Lottermoser
Stephanie Lohmeier
Alexander Hennig
Applications of Industrial Computed Tomography in the Mining Sector

Industrial computed tomography (CT) is a non-destructive X-ray computerized method for studying the three-dimensional (3D) distribution and microtexture of phases within individual solid samples. For geological and mineral product samples, CT allows visualization of phases with significant density contrast as well as the recognition of gas and fluid inclusions. Also, the technique precisely defines the in-situ location of minerals of interest. In this paper, we summarize CT principles and present examples of unique 3D information for selected ore types. For the mining sector, CT scanning of mineral resources and …


Order now Mining Report Issue 04_2021 (including this topic)
Read article
Martine Paradis
David Lyon
Frederic Gauthier
Benoit Ouellet
Eric Desaulniers
Ann Lamontage
Kevin Morin
Responsible Development: Matawinie Mining Project Model

Nouveau Monde Graphite (NMG), Saint-Michel-des-Saints, Québec/Canada, has put forward innovative design criteria related to its carbon-neutral vision, the reduction of its environmental footprint and the integration of reclamation to develop the Matawinie mining project, a world-class graphite deposit, which fits into its host environment. With graphite playing an important role in the electrification of transportation thanks to lithium-ion batteries, NMG plans to deploy an all-electric fleet for its mining operations ….


Order now Mining Report Issue 04_2021 (including this topic)
Read article
Uwe Maaßen
Hans-Wilhelm Schiffer
The German Lignite Industry in 2020

Germany’s domestic lignite output decreased by 23.9 Mt, which equals 18.2 %, from 131.3 Mt to 107.4 Mt between 2019 and 2020. The lignite extracted in 2020 had a net calorific value of 33.4 Mtce. 93.1 Mt, or almost 87 %, of that output were used in utility power plants supplying the general public. This translates into a decrease of 19.1 % compared to the previous year. The sharp decline in power generation from lignite was primarily due to the pandemic-related decrease in electricity consumption, the transfer of additional power plant units into a secure and reliable standby mode for backup purposess …


Order now Mining Report Issue 04_2021 (including this topic)
Read article
Jürgen Brüggemann
Mining Area Agreement (BBFV) RUHR – Study Regarding the Effectiveness of a New Form of Cooperation

The mining industry of the past has left long-lasting tracks in the territorial structure of the Ruhr area. Dealing responsibly with the area’s mining heritage in terms of sustainable regional developments is a major challenge. In 2014, the 17 pertinent municipalities and districts, together with the state government of North-Rhine Westphalia, RAG Aktiengesellschaft and the Ruhr Regional Association (RVR), concluded the “Mining Area Agreement | Agreement on the Forward-looking Revitalisation of Significant Mining Areas” (BBFV). The agreement formally sets forth the understanding of a common regional responsibility to ensure a sustainable subsequent use for mining areas of regional economic and urban development significance. The negotiations between the partners laid the foundation for a common understanding of the prioritisation of areas for development. The agreement provides a framework for short information and …


Order now Mining Report Issue 05_2021 (including this topic)
Read article
Thomas Waerder
Open-Pit Mine Backfilling with External Soil Material

orth-Rhine Westphalia is among the federal states that are richest in raw materials. In numerous operations, quartz gravel, quartz sand, clay and bedrock are won, provided, they are subject to the guidelines of the Federal Mining Act (BBergG) and supervised by the District Council Arnsberg, Department for Mining and Energy in North-Rhine Westphalia (mining authority of North-Rhine Westphalia), located in Dortmund/Germany.
In accordance with the regulations stipulated in the operating plan permit regarding the rehabilitation of surface used for mining purposes, the mass deficiency caused by extracting resources is oftentimes to be balanced by backfilling after the discontinuation of mining within a working section. For this purpose, the site’s excavation materials, such as loam/silt and non-marketable sand, gravel, and clay, are used to …


Order now Mining Report Issue 05_2021 (including this topic)
Read article
Jörn Lehmann
Digitalisation, Automation, Interoperability – Standardisation at International Level

Digitalisation, automation, interoperability – three buzzwords that are frequently used, but that often run into a dead end at the point of interoperability. The industrial sector wants to see this changed by the elimination of the barriers to interoperability. The vision of complete standardisation in digitalisation and automation is wishful thinking that will most likely never come true. Nevertheless, creating a basis for interoperability is achievable. Standardisation must incorporate the current state of the art and …


Order now Mining Report Issue 05_2021 (including this topic)
Read article
Andreas Kern
Christian Heet
Franz Domenic Boos
Błażej Kempinski
Dennis Maximilian Röllinger
Wear Problems? – Laboratory Testing and Numerical Simulation Support the Selection of the Best Material

In view of the high costs that arise each year due to material wear, which can amount to several percent of GDP, there is now an urgent need for wear protection systems designed to help reduce this financial loss. This requires a detailed knowledge of the areas in which the components or machine parts are being used, as these elements are frequently subjected to superimposed stress from various erosion mechanisms. Wear behaviour depends on the properties of the material in question, including its strength and hardness levels, as well as on the characteristics of the opposing body and ambient medium and on the design and structural constraints. Wear is therefore not a material property but rather a system characteristic. Never-theless, the behaviour of the individual materials …


Order now Mining Report Issue 05_2021 (including this topic)
Read article
Markus Billermann
Underground Limestone Mining by Rheinkalk GmbH in Wülfrath – a new Underground Mine for Raw Material Supply in North-Rhine Westphalia – from Operations Plan Application to Extraction

Lhoist Germany Rheinkalk GmbH, Wülfrath/Germany, is planning an underground experimental operation (Rohdenhaus experimental mine) to increase the mineral reserves of the deposit at the Wülfrath site in order to determine the economic feasibility for extraction of parts of the deposit that are not accessible for surface mining. For this purpose, an experimental mine is to be built and operated in the Rohdenhaus Nord opencast mine, taking into account mining aspects such as the location and arrangement of the access portals, conveyor connection to the existing primary crusher, sufficient coverage and recoverable limestone reserves. After preliminary talks in 2015 and 2016, the operator submitted an optional overall operation plan …


Order now Mining Report Issue 05_2021 (including this topic)
Read article
Melanie Schwermann
Holger Kories
Peter Rüterkamp
Wilhelm G. Coldewey
Foundation of the Water Management Office of the Westphalian Miners’ Union Fund 100 Years Ago

The year 2021 marks the 100th anniversary of the founding of the Water Management Office of the Westphalian Miners’ Union Fund. This institution still exists today, albeit in a modified form and under a different name. This fact underlines its importance for mining and post-mining. The history and the constantly changing tasks over the course of 100 years for this independent institution for the mining industry and government authorities verify its practical experience and the knowledge it has acquired.


Order now Mining Report Issue 05_2021 (including this topic)
Read article
Kai van de Loo
Tools for Change – How the EU Wants to Achieve the Coal Transition

The European Commission has been striving to initiate an EU-wide coal phase-out since the end of 2017 in the form of the initiative “Coal Regions in Transition”. The aim of the activities is to provide structural support to the EU’s coal regions during their move – the “transition” – away from coal. The initiative also represents a pioneering project on the path to climate neutrality in the EU and is intended to prove that no regions are left behind in and by the Community, not even the most CO2-intensive among them. In addition to special financial support from EU funds such as the Just Transition Fund, extensive conceptual assistance will be provided to European coal regions. The secretariat of the Coal Regions in Transition initiative has meanwhile provided various “toolkits”, a full collection of …


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Marcin Pawlik
Xiaoxuan Yin
Bodo Bernsdorf
Tobias Rudolph
Peter Goerke-Mallet
Application of Modern Geo- and Environmental Monitoring Methods for the Sustainable Management of Geological Resources

The sustainable management of geological resources presents a challenge for environmental and geomonitoring actions with all the diverse tasks and assignments involved, such as water management and the monitoring of environmental changes. Today’s geo- and environmental monitoring processes involve the observation of many different factors and use satellite-supported optical remote detection with multispectral or hyperspectral sensors and radar remote sensing. Such methods are able to gather extensive information about the Earth’s surface, though with a relatively low spatial and temporal resolution. Using copters as carrier vehicles for various sensors allows relatively flexible mapping to be carried out at any time and in a much higher …


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Daniel Wagener
Jürgen Rotter
Martin Isaac
Risk Management of Abandoned Mines: 2020 and 2019 – Between Requirement Analysis and Expert Reports on the Impact Relevancy of Abandoned Mines

In 2011, the NRW mining authority initiated the systematic analysis and evaluation of surface fracture relevant shafts within the state of North Rhine-Westphalia’s area of responsibility as part of risk management regarding potential hazards of abandoned mines. The measures that have been taken subsequently aim to, amongst others, prevent physical injuries or substantial damage to property through surface fracturing. As a result, a high level of safety from potential hazards within abandoned pit mines …


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Herwig Marbler
Malte Drobe
Mining Residues, Reprocessing and Related Projects at the BGR

Residues from the mining industry can be separated into waste rock, tailings and stockpiles. These different materials are usually stored separately from one another within the mine site. Where this has not been done – which is sometimes the case in older mines – the subsequent sorting and processing operation will most probably be very expensive, which often makes further reprocessing uneconomical. When extracting metals and industrial minerals from primary ores it is inherent in the process that a certain proportion of the valuable material will be left behind in the tailings. With growing international demand for raw materials and to recover partially the valuable metal content of primary ores, the quantity of mining residues is continuously increasing worldwide. The major mining countries are currently storing many billions of tonnes of mining waste …


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Andreas-Peter Sitte
The Hidden Potential of Contaminated Sites: Reprocessing Tailings for Use as a Secondary Source of Raw Materials

A part of the Eco Mining Concepts project, a German-Chilean network for more sustainable mining, the German-Chilean Chamber of Industry and Commerce (AHK Chile) organised a webinar on the topic of “The Hidden Potential of Contaminated Sites: Reprocessing Tailings for Use as a Secondary Source of Raw Materials”. The event featured presentations on Chile’s potential in this field, current challenges and initiatives and projects already in progress. Furthermore, approaches developed in Germany, Finland and Ireland were presented and possible applications in Chile were discussed. The initiative was funded by the Federal Ministry of Economics and Energy (BMWi). This article is a summary of the four presentations given during the webinar.


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Philipp Büttner
Jonathan Engelhardt
recomine – Sustainable Recycling of Contaminated Mine Waste with a Combination of Environmental Technology, Resource Technology and Digitalization

Abandoned contaminated mining sites such as heaps or slag usually cause major environmental problems, which are or have been rehabilitated in Germany by the government with a large amount of taxes. However, they usually also contain significant amounts of urgently needed strategic raw materials and consist mainly of mineral components that can be used in the ceramics or construction materials industry. These components are not won as part of traditional coverage rehabilitation. “recomine” is a WIR! alliance of over 70 partnering institutions, funded by the German Federal Ministry of Education and Research (BMBF), that deals with the global challenges of contaminated soils and works on innovative, comprehensive concepts  …


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Arturo H. Bravo
Oleg Popov
Holger Lieberwirth
Mineralogical and Micro-Mechanical Characteri­zation of Slags – Investigated on the Example of a MnSiFe Slag from Electric Arc Furnace

Recently, the recycling of metallurgical residues, e. g., electric arc furnace slag, has gained increasing importance. The potential of metallurgical slags often lies, in addition to the metallic value content, among other things in their use as aggregates for the construction industry, e. g., cement industry. The development of this potential requires a systematic mineralogical and micromechanical and physical characterization of the material accordingly. For this purpose, the present study presents and discusses suitable methods for material characterization …


Order now Mining Report Issue 06_2021 (including this topic)
Read article
Bodo Bernsdorf
Tobias Rudolph
Khaing Zin Phyu
Climate Change | Management and Monitoring of Soil and In Situ Sensor Data as the Key to Process Understanding

The decision to reconfigure and straighten the route of the Emscher river in 1902 was to herald the start of a dismal future for the waterway as the industrial age went on to reach its peak. While the Ruhr and Lippe became fresh water streams for the Ruhr valley, the Emscher, which was more centrally located between the other two rivers, was relegated to the role of a sewage channel for practically the entire Ruhr area (1). As a slow-draining lowland river the Emscher had always encountered problems on account of its very small drop in height between source and mouth (1, 2). Increasing industrialisation meant a further deterioration in the situation until things became untenable. Channelled into pipes and placed in a concrete strait-jacket the waterway was euphemistically referred-to as a sewage ditch …


Order now Mining Report Issue 01_2022 (including this topic)
Read article
Martin Wedig
German Game Changer in Mineral Supplies

The article presents serious changes in the demand for and extraction of raw materials in Germany and Europe, which are caused by the drastic changes in the legal and social framework. Only recently, the German government passed the Act on Corporate Due Diligence Obligations in Supply Chains. This new law requires companies to abide by a standard of due diligence obligations. Overall, the law establishes a conceptual gradation of responsibilities. Subsequently, these developments lead to increasing liability obligations for…


Order now Mining Report Issue 01_2022 (including this topic)
Read article
Peter Goerke-Mallet
Christian Melchers
The Mine Life Cycle and the United Nations 2030 Agenda – A Sustainability Analysis

Agenda 2030 and the sustainable development goals have continued the process of giving equal consideration to social, ecological and economic aspects in the planning and implementation of projects of all kinds. The dynamics associated with the increasing world population, globalization and the fight against the climate crisis have taken on an essential role. This brings to bear developments and instruments that cannot be ignored by the raw materials industry, as they are associated with considerable opportunities and risks. In fact, the provision of geo-resources requires an adjustment of operational activities and communication adapted to these new conditions. This paper identifies the fields of action for sustainable mining processes in the mine life cycle and addresses the consequences of …


Order now Mining Report Issue 01_2022 (including this topic)
Read article
Frank Leschhorn
Minerals for the Energy Transition and their Carbon Footprint

Energy transition involves navigating an exit strategy for use of fossil commodities. But the technologies require other minerals which are getting new applications. Beyond their role in the steel- and metals industries demand now extends into electro-mobility and regenerative energy supply. Their primary production and refining is energy-intensive, suggesting a need for more climate friendly processes.


Order now Mining Report Issue 01_2022 (including this topic)
Read article
Sebastian Graszk
Pablo Muñoz Sánchez
Samuel Viola
Wan Li
Elisabeth Clausen
Reallabor Nivelstein – Sustainable Structures for a Future-oriented Raw Material Supply

A secure and sustainable supply of raw materials is one of the societal challenges of our time. At the same time, the extraction of raw materials itself faces challenges of great complexity. These include, among others, the trend towards lower grade deposits, increasing requirements for carbon neutral raw material extraction and rapid advancements in digital technologies. To meet this complexity, the focus is increasingly on interdisciplinary approaches and the integration and involvement of different actors. Small and medium-sized enterprises (SMEs) in particular do not usually have their own research, development and innovation (RDI) departments to account for increasing demands with existing capabilities. Universities and other research institutions …


Order now Mining Report Issue 01_2022 (including this topic)
Read article
Hernan Flores
Tobias Rudolph
Stefan Möllerherm
Hyperspectral Sensing to Boost AMD Monitoring in Post-Mining Scenery

The evolving hyperspectral sensors have become a big ally for a large range of applications in remote sensing for the monitoring of a variety of earth ecosystems and processes (natural and anthropogenic). The processes occurring within the mining life cycle are not an exception. Hyperspectral sensors have been widely used in a large number of applications ranging from exploration, operation and post-mining. In this work, the authors explore particularly the use of hyperspectral methods to contribute to the monitoring of one of the most important environmental phenomena that many mining operations might face: acid mine drainage (AMD). Failure of accurately monitoring and remediation of such complex …


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Klaus Stöckmann
Smart Technology for Smart Mining – Opportunities for the German Mining Supply Industry

So many texts, including “smart” ones, have been and continue to be published about technology and mining that one is tempted to say that everything has already been said. But the many different contexts in which the term “smart” appears call for closer considera-tion: What it is understood to mean, how the various players deal with it and what goal is being pursued with its use. The article presents an analysis from the perspective of VDMA Mining in its position as a part of the largest industrial network in Europe.


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Andreas Barth
Thomas Berndt
Andreas Brosig
Delira Hanelli
Ronny Helbig
Peggy Hielscher
Andreas Knobloch
Martin Köhler
Hartmut Kühne
Steffen Schmidt
Mathias Stahl
advangeo® Software and its Application in the Mining Sector

The availability of geo-spatial data and the presence of promising exploration targets are of key importance for mining sector investment decisions. Together with the legal, political and economic framework, they determine the success of national economies in mining sector development. In this environment, Beak Consultants GmbH, Freiberg/Germany, developed its advangeo® software products to capture, store, process, utilize and distribute any kind of geo-scientific data.


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Hans-Werner Kummerow
Earnings Opportunities in Mining from CO2 Storage

The article explains how the CO2 levy is administrated in Germany and how the billions of euros that are accruing can also be used to improve the economic viability of mining projects at home and abroad. These opportunities are explained using example cases from mining practice.


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Ulrich Schöpf
Stefan Schwank
Cutter Mining – A Sustainable Technology for Mining Small Vertical Ore Bodies and Veins

Economic and at the same time environmentally acceptable mining of small vertical ore bodies and veins to great depths has always been a challenge for miners. The Bauer cutter system, widely used in civil engineering, has been further developed for applications in exploration and mining, to a sustainable system for selective mining with a focus on small vertical ore bodies and veins, as well as residual ore in open pit operations.


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Peter v. Hartlieb
Raw Materials, Future, Environmental Issues

The US investment bank Goldman Sachs and companies such as Bloomberg are optimistic about the further development of the global economy despite the ongoing coronavirus pandemic. According to the annual outlook presented on 12th January 2021 during the “Global Strategy Conference”, Goldman Sachs expects global economic output in the current fiscal year to increase by 6.5 %. The forecast for economic development from these experts is higher than the average market expectation …


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Manfred Müller
Hard Coal 2021

Events during the year 2021 illustrate very clearly that supply security is and will remain one of the most important topics of the energy transition. The penultimate act in the nuclear power exit in Germany, the shutdown of 4 GW of power plant capacity, points to the importance of the remaining base of controllable, secure capacity. Securing power supply during the energy transition is also a priority for the Coal Importers Association (VDKi), Berlin/Germany, because the availability of electrical power is indispensable as the share of production from renewable energies …


Order now Mining Report Issue 02_2022 (including this topic)
Read article
Peter Asenbaum
Landfill Operations Set to Continue at the Former Vereinigte Ville Opencast Lignite Mine

The now depleted Vereinigte Ville lignite mine south of Cologne/Germany has been used as a landfill facility since the 1970s. Each year the 300 ha site receives some 1.7 Mt of mineral waste of landfill class I, II and III. Approval has now been given for a total disposal volume of around 90 M m3. The facility has a workforce of about 60 employees and is set to be further developed as part of a resource conservation initiative. The plan is to close down the old landfill sections and install an intermediate sealing layer so that the site can be operated using the latest technology. The required environmental surveys have now been …


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Friedrich Wilhelm Wagner
EITI – Development of Sustainable Good Governance Concepts for Mining and Resource Extraction Using Global Network Structures

Society’s interest is focusing more than ever before on international mining and the global extractive industry. On the one hand, there is the wish to secure a reliable supply of raw materials, especially the so-called scarce raw materials for high-tech products and the energy transition; on the other hand, the extraction and provision of raw materials should always be sustainable and clean. In this kind of global raw material and political landscape, technological solutions alone can no longer hope to satisfy these rather contradictory aspirations. New approaches that intermediately link socio-ecological and socio-economic models sustainably with the life cycle of mining projects and offer …


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Aarti Sörensen
Elisabeth Clausen
The German Mining Network: International Mineral Resources Competence for German Companies

n times of increasing information density, breathtaking acceleration and international pressure to innovate, rapid access to information and business contacts can provide decisive competitive advantages. This is where the German Mining Network (GMN), which was launched in 2016, comes in. Its partners, offerings and operating principles are explained in this article. The network offers German companies in Germany and abroad fast and uncomplicated access to information, partners and business contacts in relevant commodity markets. As an international network …


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Klaus Stöckmann
Networks in the Mining Supply Industry

The mining supplier industry constitutes a rather small group within the German mechanical engineering sector. Its members are predominantly medium-sized companies, and the market power of the individual companies when acting alone is low. This and the close ties between them so traditional in the mining sector have prompted them to join forces in various forms and bodies providing them with opportunities to share views on common issues and to assert their common interests more effectively against third parties.


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Peter von Hartlieb
Networks and Strategic Partners Strengthen Smart Mining

Even against the current backdrop of the dramatic upheavals caused by the war in Ukraine and the concomitant effects that will be felt for a long time to come, one thing is surely clear: in the future, the work of people and companies will once again be marked more by characteristics and features such as social interaction, empathy, creativity and special skills. Smart technologies will help to mitigate the environmental impacts of mining. The global impact of the pandemic cannot be denied. The mining sector reports a mix of problems and trends that will …


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Vladislav Kecojevic
Harmony Musiyaria
Oliver Langefeld
Jürgen Kretschmann
The Development of the Society of Mining Professors (SOMP) to a Global Academic Institution

Since its founding in 1990, the Society of Mining Professors/Societät der Bergbaukunde (SOMP) has played a critical role in supporting the field of mining engineering and contributing to research, education, transfer and other collaborative activities among its members. SOMP has continued to be the leading international society for mining school professionals, recognized for effective networking; for fostering collaboration and innovation in research, teaching, and learning practices; and for its relevance and impact on the global mining sector and society at large. At its beginning, the Society functioned primarily as a European entity of senior academics in the mining engineering discipline. To date, the SOMP has become a global society with …


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Thomas Hollenberg
Bayanmunkh Myagmarsuren
Frank Wullkopf
Mining in Mongolia 2021 – Ten Years after the German-Mongolian Raw Materials Agreement

Mongolia, which is only very sparsely populated with a total of around 3.2 million inhabitants, is one of the ten most resource-rich countries in the world. In the southern part of the country, the Gobi Desert, there are gigantic deposits of copper, silver, gold, coal, fluorspar and other raw materials. Coal, copper and gold are among the most important deposits and account for about 89 % of Mongolia’s export economy and over 20 % of the country’s gross domestic product (GDP). Accordingly, mining is now the most important industrial sector in the country from an economic point of view. But Mongolia also has molybdenum, tungsten, zinc, uranium and rare earth elements, in the extraction of which China has so far had …


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Walter Frenz
Sustainable Raw Materials Production

Is the current Federal Mining Act sufficient to guarantee sustainable raw materials production – or does it need reforming to achieve this? The agreement signed by the parties that make up Germany’s “traffic-light coalition” seeks to align the Act more towards safeguarding sustainable raw materials extraction and maintaining environmental standards – while at the same time making things easier for domestic raw materials producers.


Order now Mining Report Issue 03_2022 (including this topic)
Read article
Stefanie Kurkamp
Bastian Maiworm
Intelligent Search Engine Makes Expert Knowledge Usable

Hard coal mining in Germany is history, but the expert knowledge from 150 years should remain. But how can information that is hidden in millions of documents on numerous servers be made efficiently usable? To solve this problem, RAG Aktiengesellschaft, Essen/Germany, relies on technical innovation and artificial intelligence (AI), which unlocks valuable knowledge for employees and makes it easily accessible. The company is receiving support from the Aachen-based start-up ambeRoad Tech GmbH, which is to take the company-wide search engine to the next level.


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Henning Jasnowski-Peters
Christian Melchers
Mine Water Rebound in the Former Hard Coal Mining Area of the Ruhr District – Hydrogeochemical Monitoring for a Sustainable, Ecological and Economical Feasible Post-Mining Approach

Mine water rebound including mine water management and water treatment are key perpetual tasks for the operating mine company RAG Aktiengesellschaft, Essen/Germany, and associated foundation RAG-Stiftung, Essen/Germany, since hard coal mining in the Ruhr District ceased at the end of 2018. The scientific support of the mine water rebound process includes a robust risk management and associated hydrogeochemical monitoring to verify containment and conformance of mine water during the entire rebound process. Hydrogeochemical monitoring of mine waters becomes increasingly important in the view of … …


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Sandra Träger
Special Qualification-Courses for Technicians

Each summer when the vacations/holidays come to an end, the Fachschule für Wirtschaft und Technik (FWT) in Clausthal-Zellerfeld/Germany, offers new courses in which students can attain the qualification of a “State Certified Technician”. These courses can serve as a stepping-stone towards interesting and demanding jobs especially for those who are ambitious to face tasks with higher responsibility – and higher pay, of course. Having achieved this qualification you can even go a step further – where you are working or somewhere else.


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Ulrich Sebastian
Julius Weisbach and Non-Academic Geo-Montane Education in Freiberg/Saxony

The small university town of Freiberg offers even more educational opportunities in the geo-montane sector. The Vocational School Centre (BSZ), Freiberg/Germany, named after Freiberg’s famous scientist Julius Weisbach, bundles non-university education in Freiberg. With the newly installed technical school training to become a mining technician, it is now possible to pursue a complete professional career as a miner in Freiberg in addition to an academic one. In the following, the geo-montane training at the Vocational School and the Technical College, both under the umbrella of the BSZ Julius Weisbach Freiberg, will be presented.


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Susanne Neuhaus gen. Wever
Jan Malte Sengerr
Denise Strauch
Traineeship at the Mining Authority of North-Rhine Westphalia: More than just Mining … Mineral Resource Supply, Post-Mining, Future of Energy

Are studies in the fields of mineral resource and energy supply worth the effort? Is there even still any mining in North-Rhine Westphalia? What are the mining authority’s tasks if hard coal is no longer won? These are questions many young people, especially future students who are interested in studies in mining and energy, are asking themselves. The answer, according to the experience of young leaders in the mining authority of North-Rhine Westphalia, is: “Yes, a career in this industry is worth it and qualified trainees are urgently needed.” A course of studies in the sector of mineral resource supply is not only promising, but it can also grant …


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Jürgen Weyer
Corona Pandemic and Teaching in Mining

With the beginning of the corona pandemic, contacts were restricted and events were banned. The teaching had to adapt. Online lectures replaced face-to-face events. The Institute for Mining and Special Civil Engineering at TU Bergakademie Freiberg, Freiberg/Germany, was able to implement corresponding courses immediately and also found regulations for internships and excursions.


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Nils Schlatter
Nina M. Küpper
Bernd G. Lottermoser
Digital Media in Mining Education

Digital technologies are taking over university teaching and changing the ways in which academic knowledge is disseminated. At the Insti-tute of Mineral Resources Engineering (MRE) of RWTH Aachen University, Aachen/Germany, the transfer of knowledge and principles of professional practice in mining is enriched by using innovative, digital communication media..


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Yvonne Dyllong
Uwe Maaßen
Hans-Wilhelm Schiffer
The German Lignite Industry in 2021

Germany’s domestic lignite output increased by 18.9 Mt, which equals 17.6 %, from 107.4 Mt to 126.3 Mt between 2020 and 2021. The lignite extracted in 2021 had a net calorific value of 39.3 Mtce. Of that output 111.5 Mt, or about 88.3 %, were used in utility power plants supplying the general public. This translates into an increase of 19.8 % compared to the previous year. The sharp increase in power generation from lignite was primarily due to the marked increase in the consumption of electric power, the substantially reduced input of electric power from wind power as well as the drastic increases in the natural …


Order now Mining Report Issue 04_2022 (including this topic)
Read article
Yusuf Jinadu
Lucas Kempe
Mining Engineering Aspects of Underground Waste Utilisation in Saliferous Formations Based on the Mine GTS Grube Teutschenthal

Backfilling of the cavities created by mineral extraction to support the surrounding rock is understood to be an integral part of mining engineering. In contrast to this, underground waste disposal/utilisation is often referred to as a post-mining use of the mine workings, although it requires the same technology and know-how as extraction mining, however with one small decisive difference – the “valuable” materials are not extracted from the mine, but rather brought into it. This paper discusses the mining operations of GTS Grube Teutschenthal Sicherungs GmbH & Co. KG (GTS), Teutschenthal/Germany, focusing on …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Markus Mathey
Tests Aimed at Improving Conventional Salt Mining at Heilbronn

The extraction of rock salt at Heilbronn mine by conventional drilling and blasting is investigated on the basis of three key themes: • Tests aimed at adapting the blasting pattern show that higher charging densities at the working faces result in greater efficiency in terms of advance per round and, even when all cost variables have been taken into account, can prove to be economically advantageous. Moreover, the grain quality in terms of the commercial usability of the product is not adversely affected. • A two-month study into the use of a commercially available emulsion explosive established that it was possible to achieve a significant reduction … …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Markus Mathey
Optimisation of Salt Extraction at Heilbronn Mine by a Combination of Conventional and Cutting Mining Technology

Heilbronn mine, which is owned by Südwestdeutsche Salzwerke AG, Heilbronn/Germany, has for many years been producing rock salt by both conventional mining and mechanical cutting, the two methods being operated separately. With the rearrangement of the mining sections the mine has now recently managed to combine the two techniques in such a way that staff productivity has been increased, average production costs reduced and the mine’s delivery capability improved, even when customer demand is at a very high level. In these “combination sections” the bottom bench of the mining panel is excavated by continuous miner machines while the upper bench …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Withold S. Groborz
Sibelco Water Management System (SWM) with Rapid Cleaning System (SRS/QV) Increases the Efficiency of the Sedimentation Process in Clay Mining

Dewatering in clay mining is one of the most important tasks in the extraction of raw materials, which have a direct influence on production processes as well as on the environment and water protection. The environmental awareness of the clay raw materials industry is of great importance in the Westerwald and against this background, a framework agreement on the discharge of waters from clay mining into surface waters was concluded on 19th December 2017 between the state of Rhineland-Palatinate, represented by the Ministry of the Environment, Energy, Food and Forestry, the Ministry of Economics, Transport, Agriculture and Viticulture and the Federal Association of Ceramic Raw Materials and Industrial Minerals. According to this agreement, the value of filterable substances …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Christel Füllenbach
New Technology for Mines in Regards of Emission and Automation

Negative environmental effects in connection with mining and tunneling are repeatedly highlighted in the media. Particularly critical are the issues of emissions and occupational safety. Through battery electric machines and automation of processes and machinery, a mine can unlock a number of benefits: improved health and safety, reduced greenhouse gas emissions and lower operating costs. At the same time, battery electric equipment and automation of machines and processes are developing mines of the future. The mine of the future will not look the same as it does today and the content of work …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Thomas Ahlbrecht
Practical Examples from Concrete Logistics in Shaft Construction – a Conveying Challenge

Along with steel, concrete is used as one of the most important materials in shaft construction and is used in almost every job. Concrete is also used as a building material in construction areas such as structural and civil engineering. Only the working conditions in shaft construction are completely different from those in other construction areas such as building construction or civil engineering. There, the construction sites are accessible with truck mixers right up to the excavation pit, the further transport routes are short and there is usually plenty of space available all around. Shaft construction always requires individual solutions …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Marcus Trenke
Extraction Drilling and the Resulting Possibilities

In the course of the development of new types of drilling rigs for use in the surface and subsurface areas, which has been ongoing since 2017, a large number of concept ideas and resulting application options have been developed. One focus of these developments is the efficient extraction of reef and gangue ore deposits. The challenge is to develop the technologies needed for extraction. Other areas of application are large-hole degassing wells in coal mining, as well as supply, weather and rescue wells, which are of interest regardless of the deposit type. A special case …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Craig A. Wheeler
Michael J. Carr
Peter W. Robinson
Bin Chen
Martin Lurie
Stefan Ebert
Rail-Running Conveyors: A Disruptive New Belt-Conveying Technology

The energy consumption of modern belt conveyor systems has fallen considerably in recent decades. Although extensive research has been carried out to produce energy-efficient belt conveyors, there is still considerable scope for further reducing energy consumption, especially for heavily loaded or long overland conveyors. From this starting point, a new rail-based conveyor system has been developed to reduce the energy consumption of heavily loaded and long overland conveyors. The new technology is aptly named the Rail Running Conveyor by combining two proven transportation technologies …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Wilfried Dünnwald
New Concept for Preventive Maintenance of Belt Conveyors

Mining companies that rely on preventive maintenance should visit the stand of ScrapeTec Trading GmbH, Kamp-Lintfort/Germany, at bauma. The company, which specialises in optimising belt conveyor systems and is known for its contactless AirScrape sealing system, integrates robust sensor technology into a guide roller, evaluates the data in an industrial computer and sends it by radio, e.g., to maintenance software. At bauma, the E-PrimeTracker, as the system is called, can be seen live for the first time.


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Volker Bremer
Mineral Oil-Free Hydraulic Fluid – Proven and in Demand Nationally and Internationally: Substitution of Mineral Oil with Existing Technology in Hydraulics

The Corona pandemic and the Ukraine war are rocking the econo-my and society. Climate protection is an ongoing issue. Supply chains are partially broken and container ships are waiting to be unloaded in all parts of the world, including Germany. The issue of procurement applies to many companies and the question is: How can we become more independent? As a company, can we now use substitution as a means to make a positive contribution to environmental and climate protection while not losing sight of our own goals? With the help of various practical examples from operators of hydraulic systems, this report illustrates the sometimes different reasons …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Maximilian Lübeck
Raw Material, Environmental and Climate Protection Issues Relating to the Coal Phase-Out

On 28th June 2022, representatives from various spheres of influence such as ministries, companies, universities and law firms gathered for a virtual, interdisciplinary conference on the topic of the coal phase-out. It served to shed light on the current situation and to discuss it critically. After the welcoming address by Prof. Walter Frenz (Department of Mining, Environmental and European Law, RWTH Aachen University) and Prof. Axel Preuße (Institute for Mine Surveying, Mining Damage Science and Geophysics in Mining, RWTH Aachen University), the individual presentations were introduced. The objective of this conference was …


Order now Mining Report Issue 05_2022 (including this topic)
Read article
Michael Paul
Frank Winde
Emerging Global Trends in the Extractive Industry – International Potential and Future Roles of Remediation Expertise from Germany

Never in history were more mineral resources extracted than at present. In the past 20 years alone global metal ore extraction doubled. If current growth rates continue, more metals will be mined by 2028 than from the beginning of humankind to 2013. This exploding demand is set to rise even further as fossil-fuel based economies transform into low-carbon societies. Along with expanded mining, inevitably, associated environmental impacts are also poised to increase. These impacts may be even more severe than in the past as future deposits are more difficult to mine …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Kai van de Loo
Suspend Coal Phase-Out – Keep Existing Plants in Operation and Reactivate Available Capacities, Give Transition More Time

While there are no fundamental doubts about the direction of the energy transition in Germany – much less the goal of achieving sustainability – the changes in the general circumstances dictating energy policy that have occurred in 2022 give rise to sound arguments in favour of suspending the coal phase-out agreed in Germany. Current law requires the completion of the exit “by no later than 2038”; the coalition agreement of the “traffic light government” expresses the hope that the process will be concluded “ideally as early as 2030.” But in reaction to the “new era” impacting energy policies in Germany and elsewhere and the acute natural gas emergency, the previously set path for the coal phase-out is already …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Ingo Milas
Nicole Reinersmann
Securing an Air Shaft in Witten, Taking into Account an Overburdened Mine Water Level

At the beginning of March 2020, the Arnsberg District Government, Department of Mining and Energy in NRW, Dortmund/Germany, was notified of a repeated significant inflow of water in the area of a residential building in Witten. In view of the damage that had already occurred to the building and according to the assessment of the mining situation shown in the mine map and other maps, the cause of the water inflow and the ground movements apparently triggered by it was very probably of mining origin. On the basis of the present specific hazard situation …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Reinhold Both
Development and State of the Art of Dust Control in International Mining and Tunnelling

The quest for safety for man and machine is becoming increasingly important in mining and tunnelling worldwide. Due to the mechanisation of sinking, tunnelling and extraction work in underground mining and processing, the amount of dust generated in the various work processes has steadily increased – in line with the increase in performance. Although the occupational disease silicosis, which is subject to compensation, could be reduced in Europe due to the success of modern dust control methods, this occupational disease is still …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Thomas Ahlbrecht
Dust Control in a Novel Technology for the Construction of Shafts

In Belarus, potash mining has been carried out intensively for about 60 years, so far by the state-owned company Belaruskali in six mines. Since 2011, the privately financed Nezhinskiy mine has been planned in the deposit near Soligorsk, and construction of this greenfield mine started in 2016. The planning from 2011 initially envisaged the sinking of two shafts using the freezing method and the application of drilling and blasting. In 2016, the future operator Slavkaliy decided to use a new technology for sinking, mechanized shaft drilling from the solid with machines …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Jürgen Weyer
Thomas Teichert
Sascha Engler
Spoiler title

Ventilation measurements and data from several days of underground monitoring were used to record the actual status of the mine climate and ventilation circuit at a rock salt mine. This provided the basis for identifying a number of critical parameters, including the problem of dust collection around boom-type heading machines. This information was then used to determine where potential im-provements could be made to the ventilation system and mine planning process.


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Jens Kegenhoff
Technical Aspects of Auxiliary Ventilation at Dust-Intensive Workplaces

Many different technical relationships and parameters have to be taken into account for the professional cleaning of dust-laden air. Filtering the dust load from the air requires a fan system to set the air in motion so that it can pass through the filters. In mechanised drivages and conventional tunnelling operations the technical ventilation methods being deployed have to be matched exactly to the dust extraction system. Air speeds, clearances, pressure surcharges, climate parameters and many other factors all have to be included in the auxiliary ventilation regime to create an efficient dust evacuation process and in this way to ensure that clean air is available at the workplace.


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Ergin Isleyen
Jürgen F. Brune
Sebnem H. Duzgun
Continuous Respirable Dust Monitoring with Localization

The U.S. Mine Safety and Health Administration (MSHA) mandates the use of continuous personal dust monitors (PDM) in underground mines to verify compliance with mandatory respirable dust standards. Regulation 30 CFR §70.100 establishes a limit of 1.5 mg/m3 averaged over an eight hour working shift. Miners who work in dusty conditions are required to wear the PDM for several shifts each month to document that they are not overexposed to respirable dust. The PDM uses frequency changes in a tapered element oscillating microbalance (TEOM) to measure inhaled, respirable dust concentrations …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Jens-Peter Lux
The Natural Resources Sector in Transition: Paths to Sustainability

The mining industry plays a key role in the transformation towards a climate-neutral economy. The natural resources sector makes an important contribution to a sustainable world. The importance of natural resources and the functioning of international supply chains have been clearly demonstrated by current geopolitical events, as well as previously by the Corona pandemic. No economic model can do without natural resources – the question is …


Order now Mining Report Issue 06_2022 (including this topic)
Read article
Julia Tiganj
Tobias Rudolph
Targeting a Low-Carbon Economy Using China as an Example: The Pros & Cons of a Shift from Coal to Renewables

Climate neutrality is a global goal that requires the high integration and use of renewable energies to ensure such a transition. In this regard, China in particular, as the largest mining country in the world, is at the forefront of renewable energy production, both through hard coal and rare earths. The great potential faces crucial negative aspects: The production of energy alternatives using rare earths generates environmentally harmful gases and wastewater. Furthermore, the recycling of such products …


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Kai van de Loo
Post-Mining as an Example of Economic Evolution. Explanatory Elements in the Work of Helmut Arndt.

Every mining operation and mine site will, as such, come to an end one day and so will transition to the post-mining era. That is simply part of the economic evolution. As for the post-mining sector, which it has long neglected, conventional economic science still finds it hard to accept realistic explanations of evolutionary developments. And yet productive ideas on evolutionary economics have been around for quite some time. One of the German-based trailblazers, who has now been almost forgotten, was the economics professor Helmut Arndt who died in 1997 …


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Claus Bachmann
Eduardo Yanez
IBERIA – In Situ Determination of Metal Concentrations

Ore grade control is often based on geochemical sampling of boreholes cores or detritus. Limitations of this method include a single assay result representing a certain borehole depth, bias generated by sampling of the material and the delay in the delivery of results which can take days or even weeks, so that many decisions in the field have to be taken without fully understanding of the real element contents of the ore body. And this despite elemental analysis is a fundamental component of mining grade control and resource block models. The XRF-based logging tool, called IBERIA, has been developed specifically for…


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Manfred Ziegler
Theory and Practical Experience of a Digital Twin for Optimal Operation and Maintenance of Belt Conveyors

A large part of the bulk material transport in mining is carried out by belt conveyors. This will increase in the future. The correct design, operation and maintenance are of decisive importance for their economic operation. Recent developments such as the use of a digital twin of the conveyor can make a significant contribution here. This article is intended to present the theory and operational practice of the digital twin “BeltGenius” for conveyor systems …


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Moritz Ziegler
Arne Köller
Elisabeth Clausen
ARTUS: Decentralised Communication of Mobile Mining Machines

The ARTUS research project aimed to develop systems for a holistic implementation of a com-plete loading-unloading cycle conducted by an autonomous fleet of special-purpose mining ve-hicles. A key challenge in developing such systems is providing the communication infrastruc-ture and ensuring technical capabilities to fulfil needs for machine-to-machine communication (M2M). This article presents project works and research results of the Institute for Advanced Mining Technologies (AMT) of RWTH Aachen University (RWTH), Aachen/Germany, in the field of …


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Julian Lassen
Martin Schulte
Jonas Müller
Leon Hecht
Development of a Platform Demonstrator – an Experience Report

Digitalization offers companies strategic advantages through the simplification and optimization of business processes and is an important lever for long-term growth. Numerous industries already benefit from optimized coordination of capacities and resources by integrating digital technologies into business processes. Digital platforms enable, e. g., the demand-based adjustment of asset capacities at peak loads on the basis of data-based forecasts. In particular, small and medium-sized enterprises in the German quarrying industry have so far ….


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Markus Billermann
The Gomer Slate Mine of MAGOG GmbH & Co. KG – from Roofing Slate to Slate Veneer

Slate has been used for many centuries as a natural building material, primarily for roofing purposes, and during this time the slate mining industry has left its mark on entire landscapes. In Germany slate mining has been practised at many different locations, these including the Harz mountains, the Franconian Forest, Thuringia, Vogtland, Siegerland, by the Lahn river, in the Taunus area, at Kaub near the Rhine river, in the Hunsrück and also north of the Moselle river, in the Eifel mountains and in Westphalia. For various reasons, mostly economic in nature, most of these mining operations …


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Thomas Lautsch
Ralf Holländer
Christian Wilkens
David Horner
Olga Grobe
Smart Repositories – BGE Goes Digital

The Federal Company for Radioactive Waste Disposal (Bundesgesellschaft für Endlagerung BGE), based in Peine/Germany, is in charge of, among other things, the conversion of the former Konrad iron ore mine into a repository for low to intermediate level radio-active waste and the decommissioning of the Asse II mine, after retrieval of the radioactive waste. The following report deals with digitisation for these projects. It discusses digital planning tools and how they are linked to each other.


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Sunny Schoone
Dan Fodor
Bernardo Marinho
Christian Moese-Singer
Digital to the Core – E2E Optimization of Mining Operations

Digitalization touches every aspect of the mining value chain – from excavation to transport to benefaction to how minerals are stored and handled. As an end-to-end (E2E) digitalization partner for the mining industry, Siemens Minerals, Erlangen/Germany, offers a complete digital portfolio – some main elements of which are highlighted here. At each step of the way, individual processes are optimized. Yet the biggest effect is achieved when all the data generated in each area is brought together …


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Colin Mackey
Andreas-Peter Sitte
Focusing on the Future – How Rio Tinto Is Shaping Modern and Sustainable Mining

Rio Tinto is the second largest mining company in the world. It was founded in 1873 and operates in 35 countries, with its headquarters in London/UK. Managing Director European Operations, Colin Mackey, has led the company’s European operations since October 2021, but has been in the mining industry for over 20 years and has held various positions at Rio Tinto since 2003. He spoke to Mining Report Glückauf, about geopolitical aspects of raw material supply, the supply and role of critical raw materials such as lithium for the energy transition, but also modern and sustainable mining.


Order now Mining Report Issue 01_2023 (including this topic)
Read article
Mareike Bothe-Fiekert
Angela Binder
Oliver Langefeld
Historic Mining Infrastructure as an Opportunity for Regional Water- and Energy Supply: The Water Reservoir Harz 2050 Project

High precipitation, dams and waterworks make the Harz Mountains a large freshwater supplier. But, challenges arise based on climate change and extreme weather events. Old mine working can support water management if integrated into the system. Successful planning and integration need a holistic understanding of the regional water cycle, the current situation of the mine workings and the interaction. The development of a hydro-analytical water management tool establishes a link …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Marcin Pawlik
Tobias Rudolph
Bodo Bernsdorf
Peter Goerke-Mallet
Michael Hegemann
Maik Gellendin
Digital Twin – Integrated Geomonitoring

One of the main challenges facing us today is the environment and how to protect it. Mining activities over the years have had an enormous impact on the three environmental elements water, soil and air. Ground movements in mining areas can be observed both during the mineral winning phase and after this has ended. This phenomenon may affect the water balance of a region as a rise in the groundwater level can lead to “water stress” in plants, which in turn can manifest itself in reduced vitality …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Aleksey Pyrikov
Viktor Yermakow
Natalia Lubenska
Julia Tiganj
Restructuring of the Coal Industry in Ukraine

Ukraine ranks 7th place in the world in terms of coal reserves. On the territory of Ukraine there are three coal basins: Donetsk, Lviv-Volyn and Dnipro, the largest of which is the Donetsk basin, where 85 % of Ukraine’s coal resources are concentrated. Since the mid of the 1990s the coal industry of Ukraine is being restructured, the purpose of which was to abandon state subsidies for unprofitable mines, with their subsequent closure and the privatization of profitable or potentially profitable mines. Despite the fact that Russia’s aggression against Ukraine has made its own adjustments to the work of coal enterprises …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Clara Kahn
Diversification and Sustainability − Criteria for Success in Times of Tense Raw Materials Markets

Rare earths, cobalt, magnesium, lithium: Over 90 % of the metallic raw materials used in Germany were imported last year. A significant part of these imports originated from countries with difficult political situations or monopolies in the exploitation and processing of raw materials. These dependencies have gained even more geopolitical importance against the background of the Russian aggressive war against Ukraine. Given the expected growing demand for critical raw materials …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Charles Stith
Mimi Stith
Yusuph Karim Mmbaga
Kenneth Jennings
Breton Scott
Securing the Battery Mineral Supply Chain: A Tanzanian, US American, German Collaborative Model

As global powers work to secure mineral supply chains for high-capacity battery manufacturing, collaboration with Africa is more important than ever. Germany’s participation in the Minerals Security Partnership (MSP), an alliance of twelve nations and the EU, signals that winning the race to secure battery minerals requires global collaboration. The MSP engages African partners, including the stable, democratic, resource-rich and under explored East African nation of Tanzania …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Jan Patrick Häntsche
Innovation Networks – A New Market Access to the Mining Sector in Peru

Peru is considered one of the ten richest countries in resources in the world and currently occupies an important place in the production ranking. The country is home to numerous mining companies that are increasingly focused on the innovation of technologies and processes, which has improved the competitiveness of the industry. The objectives in Peruvian mining in this development are to increase efficiency in production, in the use of energy and other resources, as well as to increase occupational safety, reduce costs and prevent accidents. To ensure the long-term competitiveness …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Thomas Schicht
Anke Schindler
Anne Allendorf-Schicht
Exploration Concept and Implementation of a Salar with Lithium Brine in South America

Salars and salt lakes occur in South America and other arid areas of the World and contain large quantities of lithium brine. The concentration of brine varies across the salars. A good knowledge of the internal structure of the salars is needed to optimize the exploitation and pumping plan. This information is also needed to ensure that brine production is done in an ecologically sustainable way.


Order now Mining Report Issue 02_2023 (including this topic)
Read article
André Jakobs
The Introduction of Battery-Electric Mining Equipment – Opportunities and Risks

The requirements for the realization of greenfield projects have changed due to the aspiration of society, but also of potential investors, for sustainable raw material extraction. Through emission-free mining technology, the expectations of the industry can be met more and more. In the future, the success and support of greenfield projects will increasingly depend on what sustainability goals are set and how conscientiously work is done to achieve them. Early and close cooperation between the operator and the machine manufacturer will be a decisive prerequisite for the success of a project ….


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Fabian Stamm
LiquidEarth: At the Desk and yet on Site

LiquidEarth is a cloud-based software solution for geological exploration projects and mining that bridges the gap between field and office work. It saves geological data to the cloud, visualizes it, and enables all parties involved in a project to collaborate easily, quickly and remotely. They can view, interpret and adjust 3D geodata and geological models together with other users in real time − regardless of location, time or device. In this way, LiquidEarth reduces time and costs, helps experts understand geological features, and supports them in the creation of reliable 3D models.


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Alexandra Radl
Elisabeth Clausen
Mining in Space – Excavation of Raw Materials on Other Celestial Bodies

The exploration of space has fascinated humankind for decades. Along with this, establishing a colony on other celestial bodies, such as the moon or Mars, has gained increasing interest. For building such a colony, the use of extraterrestrial raw materials is of great importance. In order to make these raw materials usable, just as in terrestrial processes, the first tasks are prospecting for valuable resources as well as mining the mineral raw material. Due to the challenging environment, innovative and highly autonomous processes are required for the excavation of raw materials …


Order now Mining Report Issue 02_2023 (including this topic)
Read article
Jürgen F. Brune
Peter Goerke-Mallet
Abandoned Mine Workings in Western USA – Legal, Organisational and Technical Challenges

There is an old saying that “mining is not a one-man operation”. This is borne out by the ongoing dialogue that is needed across the disciplines to manage the environmental issues associated with the mining life cycle at a local and wider level. Given the global nature of the mining industry we now need to develop a productive outcome by looking beyond national boundaries in order to gain a deeper understanding of the challenges that are facing countries other than our own.


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Stefan Nitschke
A Turning Point in Resource Dependencies? Europe’s Access to Critical Raw Materials Must Be Kept Open

The availability of strategic and critical raw materials is at risk. At the height of the 2020s, the European Union (EU) continues to remain dependent on imports from overseas, including many countries with a high geographical risk. In addition, the vast majority of non-metallic and metallic minerals are received from a few third countries, furthermore underlining the EU’s strategic dependencies. Two figures reflect the situation in 2020: the People’s Republic of China supplied 94 % of the global output of rare earth elements (REE) and produced …


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Axel Kunz
Eric Hohlfeld
The Tellerhäuser Project: Development of a Polymetallic Deposit in Saxony

One of the largest tin resources in the world, a rich mining tradition and good data availability going back centuries – all would seem to portend well for the Tellerhäuser project that Saxore Bergbau has launched in eastern Germany. The operation, which is based in the mining town of Freiberg, has been under way for several years and is being supported not only by local companies but also by experts from the nearby mining academy. Saxore is planning to develop a modern mine with a minimal ecological footprint …


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Klaus Grund
Martin Jungnickel
Pöhla Ore Mine of Saxony Minerals & Exploration AG: Planning Status – Challenges – Preparatory Work

Saxony Minerals & Exploration AG (SME AG), Halsbrücke/Germany, plans to put the Pöhla-Globenstein polymetallic skarn deposit, located within the Pöhla SME permit field, into use. The special feature is to plan, construct and commission a mine from scratch. In the specific case of the Pöhla ore mine, the main challenges were substantial water inflows with a high suspended solids content, to be discharged into the receiving watercourse after appropriate pre-treatment ….


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Ralph Braumann
Status of the KSL Project in Lusatia

KSL Kupferschiefer Lausitz GmbH, Spremberg, was founded in 2007 as a Germany based subsidiary of MINERA S.A. and since then has been preparing the Spremberg copper deposit for mining. Since 2008 new data have been collected about the deposit which were discovered and partly explored since the 1960’s. This includes the development of concepts for mining and processing as well as their economic evaluation. Permitting is another major area of the business. The regional planning procedure …


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Christian Zinnecker
The Fluorspar Project Gehren in the Association of the Fluorchemie Gruppe

Fluorite, also called fluorspar within the mining community, is an industrial mineral that is unknown to many, but plays an important role in many applications today. As the main natural occurring fluorine containing minerals it is part of the 30 critical materials of the EU that are still heavily relying on imports from countries outside the EU. The Fluorchemie Gruppe (FCG) uses fluorspar exclusively in the form of acid spar (> 98 % CaF2) for producing hydrofluoric acid (HF) and relies on imports for its annual production of around 24,000 t of HF. Some of it is already fulfilled by another group owned mine in the German state of Saxony …


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Walter Frenz
Planning for Mining Requirements

Mining law is explicitly linked to spatial planning law in section 48(2) second sentence BBergG (BBergG – Federal Mining Act), and the latter is of major significance for operating plan approvals under mining law. The INSTRO reform report calls for greater consideration of spatial planning concerns – rightly so? This leads to the fundamental question: To what extent should and may raw material extraction be planned at all in view of the climate protection requirements and the pending implementation of the EU Building Efficiency Directive, which is currently under revision?


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Olaf Drusche
Jürgen Kretschmann
Low Carbon – High Damage? Renewable Energies and Rare Earth Elements

Achieving the goals of the Paris Climate Agreement limiting the global temperature increase to 1.5 °C will require massive investment in renewable energy. The transition to a decarbonized energy system will lead to a huge increase in demand for minerals, especially metals, rare earth elements (REE) and lithium, making the energy sector a major force in commodity markets. More mining is necessary than ever. The world mining production will ­increase the risk of high damages if the minerals will not be mined as sustainable as possible. Especially mining and processing REE …


Order now Mining Report Issue 03_2023 (including this topic)
Read article
Holger Witthaus
Mine Water Monitoring in Closed Mines at RAG Aktiengesellschaft

The shutdown of hard coal production in 2018 implicates a challenge in deriving of physical and chemical parameters of mine water in situ. Finishing underground activities is going along with a limitation of alternative application of monitoring methods. This report is focussing on measures to derive sufficient information about water rebound in former mines. Exemplarily results of an underground monitoring system, which was developed in cooperation between TH Georg Agricola University (THGA) in Bochum/Germany and RAG Aktiengesellschaft, Essen/Germany, are presented. The system includes four probes at the former …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Wolfgang Dronia
Philipp Hensel
Jürgen Kugel
Martin Wissen
Integrated Monitoring of Rising Mine Water Levels in the Hard Coalfields of North Rhine-Westphalia – a System under Development

The year 2020 marked the start of an integrated process aimed at monitoring rising mine water levels in the former hard coal mining industry of the Ruhr coalfield and the Ibbenbüren coalfield. This paper presents the different topics that are to be dealt with and the assessment strategy that has been laid down for the monitoring operation and also examines the make-up and previous activities of the various bodies involved. After establishing the scientific and technical bases of the operation …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Bernd G. Lottermoser
Environmental Pressures of Current Mining in Germany: a Critical Comment

Mines interfere with the environment. However, active mining in Germany in its various forms causes only small overall environmental pressures, based on data from the Federal Statistical Office of Germany, due to its limited land use, waste production, water extraction as well as particulate matter and greenhouse gas emissions. Therefore, federal politics should acquire and present to the public strategies, key issue papers, writings and websites on German mining that reflect these scientific facts. In future, it is important for the German mining sector …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Thomas Ahlbrecht
Experiences and Outlook for Machine Sinking of Shafts and Developments in Conventional Sinking with Drilling and Blasting

Conventional shaft sinking with drilling and blasting has been the predominantly used method for more than 100 years. The method is very flexible for all kinds of geological conditions and always applicable. Since most shafts were sunk for hard coal, the equipment used for drilling or for loading the debris away was compressed air-powered because of the firedamp protection. For decades, different shaft sinking companies have been developing technologies for mechanised sinking from the solid in cooperation with various mining machinery manufacturers. Mechanical sinking offers considerable advantages …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Danny Bodenstab
Head Frame of the Research and Training Mine Reiche Zeche − Spectacular Renovation of a Landmark

Since the 1950s, the head frame shaft Reiche Zeche of the research and training mine of the TU Bergakademie Freiberg in Freiberg/Germany has shaped the silhouette of the city. The head frame had to be refurbished almost 70 years after its construction − a demanding project in the conflict area between technical regulations and monument protection …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Dennis Wagner
Pablo Muñoz Sánchez
Elisabeth Clausen
ELMAR: Research on Electric-Autonomous Transportation and the Implications for Mine Design and Energy Management

The ELMAR research project, funded by the German Federal Ministry of Economics and Climate Action (BMWK), aims to integrate and demonstrate electric and autonomous transport vehicles in raw material extraction operations. This will be done with special consideration of maintaining process reliability and ensuring electrical supply security, as well as their coupling to renewable energy sources within the framework of suitable representative application scenarios (use cases) …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Mike Passen
Weir Motion Metrics Unveils Cutting-Edge Product Catalogue Empowering Mines with Advanced Technologies

Weir Motion Metrics, a Canadian technology company that uses its expertise in artificial intelligence (AI) and computer vision to improve mine safety and energy efficiency, presents its comprehensive product catalogue, delivering state-of-the-art, AI-enabled, 3D vision technologies to revolutionize the mining industry. With a focus on machine vision, AI and cloud computing, Weir Motion Metrics offers rugged solutions engineered to withstand …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Lauritz Albrecht-Vogelsang
Robby Schmidt
Dirk Fraas
Peter Herzel
High-Voltage Power Cable Project – the SuedLink Line Goes Underground at the Südwestdeutsche Salzwerke Salt Mine near Heilbronn

The final 16 km of the 700 km long SuedLink high-voltage direct current transmission cable will pass through − or more precisely beneath − the conurbation of Heilbronn and in doing so will follow a route through the existing rock salt mine operated by the salt mining company Südwestdeutsche Salzwerke AG (SWS), Heilbronn/Germany. This energy scheme, which is being implemented under the Federal Requirements Planning Act, is being delivered by two project developers TransnetBW, Stuttgart/Germany, und TenneT TSO, Bayreuth/Germany. The underground phase not only involves the sinking of two vertical shafts and …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Frank Winde
Innovative Closure Concepts around the Water-Energy-Nexus in Mining – a Case Study from South Africa

ince the earliest days of extracting and processing minerals, access to both, water and energy, has been indispensable. Using historic and contemporary examples at various scales the paper explores the interdependencies between both resources in the context of mining. For the semi-arid mining nation South Africa water and energy security are currently posing significant challenges as the recent AMD crisis and the ongoing energy shortage illustrate …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Iris Wunderlich
Stefanie Schmitt
Chile, Salt Lakes and Lithium: Current Production Status

The Chilean Ministry of Mines and the German Federal Ministry for Economic Affairs and Climate Protection (BMWK) expanded the raw materials coorperation that had existed since 2013 into a partnership for mining, raw materials and the circular economy. Among other things, this gives special place to cooperation on critical minerals and environmental aspects for mining in the 21st century. Among the critical minerals is not least lithium, which plays an important role in achieving the climate goals …


Order now Mining Report Issue 04_2023 (including this topic)
Read article
Kai van de Loo
Julia Haske
Wind Power for the Transition at Coal Sites – Prospects and Problems

Wind power is one of the politically prioritised options for the energy transition to climate neutrality at coal sites, although the use of “Carbon Capture and Storage” (CCS) technology during coal-burning operations is also a possible method for the reduction of CO2 emissions. Wind power is undergoing impressive technological and economic development, and its expansion enjoys a high priority in energy and climate policy, especially in Germany. Indeed, former coal sites often offer relatively favourable conditions for wind turbines. A more detailed examination reveals that the choice of locations for wind turbines requires quite …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Peter von Hartlieb
Mine Gas as a Raw Material for Energy and Heat

Politics, specialist science and the mining supply industry are equally bound to tradition and committed to the future. All stakeholders are now committed to the energy transition. The state government in North Rhine-Westphalia is pursuing the goal of climate-neutral electricity generation by 2050. To this end, renewable energies are to be expanded and further advanced. In their coalition agreement, the political parties CDU and Bündnis 90/Die Grünen have agreed on an ambitious agenda for implementing the energy transition. This includes, among other things, the expansion of photovoltaic and wind energy plants as well as …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Jürgen Ilse
EU-Wide Regulator for Methane Emissions Makes Sense, but not for the Decommissioned Coal Sector in Germany

The issue of methane (CH4) has been on the European Union’s agenda for a long time and is now being pushed in order to achieve the goal of net zero greenhouse gas emissions in the EU by 2050, on the one hand overzealously, but also with little knowledge about the origin and source of methane emissions in active and abandoned coal mines. The greenhouse gas potential of CH4 is 25 or 28 times that of carbon dioxide (CO2). Nevertheless, it does not have to be tracked down to the last crack of the earth, so to speak, as proposed by the Commission in its regulation. A look at the overall dimensions makes it clear …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Andreas Brandt
Markus Dietzen
Frank Frauenstein
Stefan Schneider

Mine Gas – Climate Protection and Energy Industry Regulation

Mine gas from abandoned mines is a special topic of European and national climate policy. It continues to threaten to escape from coal deposits that have not yet been affected by flooding. The initial support for the utilisation of mine gas for electricity generation via the Renewable Energy Sources Act (EEG), which expires for most mine gas plants by the end of 2024, has always been an auxiliary construction, but one that has provided a reliable framework and clear incentives for collection, extraction and utilisation. From 2024 onwards, the continued operation of mine gas plants depends solely on the revenue prospects …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Thomas Imgrund
Martin Wissen
Ernst-Günter Weiß
Philipp Hensel
Release of Mine Gas at the Surface – Status of Safety Measures and Monitoring in the Course of the Mine Water Rise

In order to keep the mine workings in the German coal mining industry dry, the mine water had to be lifted from great depths and brought to the surface for centuries. With the phase out of hard coal mining in the Ruhr area and in Ibbenbüren in 2018, the original purpose of this mine water management was lost. Since then, the mine water has been rising in a controlled manner. This increase in mine water is associated with a profound change in the mine gas supply of the deposit and a change in the outgassing situation at the surface cannot be ruled out. By intensively monitoring the outgassing …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Frank Otto
Alexander Rudek
Jürgen Forsting
Jürgen Kanitz
Capturing and Utilisation of Landfill Gas

From municipal landfills, methane-containing landfill gas is produced during the conversion of biogenic organic matter, which has a very high greenhouse gas potential – more than 28 times stronger than carbon dioxide (CO2) over 100 years. Based on decades of experience, it is extremely difficult to adequately capture this landfill gas in a heterogeneous heap (landfill body) – due, among other things, to the complex system, the physical structure/installation, different landfill gas-forming biological and biochemical degradation processes …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Maike Kroll
Axel Preuße
International Efforts for the Abatement of Methane Emissions in the Energy Sector

The abatement of greenhouse gas emissions has long been a focal point of international climate policy as an important aspect in achieving or as the direct topic of climate targets. As a greenhouse gas with a relatively short life time in the atmosphere and strong global warming potential compared to carbon dioxide, methane emission abatement measures present an opportunity for short-term impact on reducing global warming. International efforts involve the collection, processing and providing of data, the support and advancement …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Sven-Eric Heinz
Betty Willingstorfer
How Noise Affects Humans

Noise can endanger human health and safety in different ways – both physically and psychologically. Many occupations have daily noise exposure levels of more than 85 dB(A) or peak sound pressure levels of more than 137 dB(C). If these affect the inner ear over a long period of time, it can lead to permanent damage to the so-called hair cells. Since these cells are not regenerated, noise-induced hearing loss cannot be cured. The occupational disease noise (BK 2301) is one of the most frequently reported and recognised occupational diseases in Germany …


Order now Mining Report Issue 05_2023 (including this topic)
Read article
Joachim Sommer
Many Dangers Lurk

Ageing and wear and tear do not stop at machines and industrial plants. This can be counteracted with maintenance. What are the legal regulations and obligations? What are the risks? Answers to these questions can be found on the following pages. The topic of “Hazardous Substances in Maintenance Work” will also be the focus of a symposium of the ISSA Chemistry Section on 11th and 12th June 2024 in Frankfurt/Main, Germany. Participation is possible both via livestream and on-site during ACHEMA.


Order now Mining Report Issue 06_2023 (including this topic)
Read article
André Küster
Jan Wilking
Annika Mittmann
Mining Law and Water Management Challenges as a Result of the Coal Phase-Out

In the Rhenish mining area, RWE Power AG operates the three opencast lignite mines Inden, Hambach and Garzweiler. According to the original plans before 2016, the Hambach and Garzweiler opencast mines were scheduled to run until 2045, the Inden opencast mine until 2030. In the context of the energy turnaround, the opencast mine plans and lifetimes have been adjusted several times. Opening clauses and regulatory intentions with regard to a further advance of the coal phase-out in Germany will lead to a further adjustment of the opencast mine plans and lifetimes. The adjustments must be implemented in terms of both mining and water law …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Bernd G. Lottermoser
The Seven Deadly Sins of German Politics on Raw Materials

German politics on raw materials aims to influence the mineral resources sector in the long term, from the extraction to the consumption of mineral resources, with the help of strategy papers, information documents, funding programs, regulations and laws. However, for many years now, German raw material politics has not managed to present strategies and demonstrate successes that convince all stakeholders. This article highlights the serious errors in German raw material politics from the perspective of the mining sciences. This critical assessment is to allow politicians the frightening possibility of self-reflection and show some bitter truths …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Martin Wedig
Turning Times in the Supply of Energy and Raw Materials – Opportunities for Mine Surveying

More than 100 experts met from 27th to 29th September 2023 for the conference “Environment, Energy and Raw Materials – A Turning Point in Energy and Raw Material Supply. Opportunities for the meadow industry”. It took place at the RWTH Aachen University, Aachen/Germany, and at the Energeticon in Alsdorf. The German Mining Association and the RWTH Institute for Mining, Mining Damage Science and Geophysics in Mining under the direction of Prof. Axel Preuße had invited. The thematic focus of the conference was in particular the possibilities of artificial intelligence in geosciences as well as hydrogen and energy storage in the mining context …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Walter Frenz
Levy on Commodities Companies

Possible government activities aimed at securing the supplies of raw materials have lately come under scrutiny. A company levy is the obvious means of choice to finance any such actions. Would a charge of this nature be compatible with fundamental rights and the fiscal constitution? This article is based on an expert assessment prepared by the author for the Federal Ministry for Economic Affairs and Climate Action (BMWK).


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Stefanie Krause
Jürgen Kretschmann
Circular Economy in Mining – Active Integration of Environmental, Social and Governance Criteria into the Core Business

Mining companies are the enablers of the energy transition and green future technologies, as they provide the materials urgently needed for these in increasing quantities and on a broader scale. The mining sector is a key industry with regard to many sustainability issues and is therefore confronted with complex demands from its stakeholders. Pressure is arising in particular from stricter political regulations and extensive demands from increasingly critical investors, who require compliance with a wide range of Environmental, Social and Governance (ESG) criteria. In the search for solutions …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Sandra Nowosad
Mareike Bothe-Fiekert
Oliver Langefeld
Blue Mining Strategically Integrates Circular Economy

The mining industry faces a complex and pressing challenge driven by an increasing demand for raw materials and a socially demanding and globalized world. The extraction of primary raw materials has gained importance as one of the cornerstones of humanity’s sustainable development, significantly because the necessary raw materials to evolve towards a sustainable future as copper, lithium, nickel and cobalt could be sourced by 2050 only in 10 % by recycling. Therefore, the remaining needed 90 % must be sourced by primary extraction  …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Martin Bertau
Martin Reiber
ZauBer – Materials of the Future from Old Mines

The challenges posed by the many geopolitical upheavals of the last years, as well as the need to find new ways of extracting raw materials and securing the raw material base for domestic industry, have long remained without any significant echo in Europe. Deep-rooted in relevant speeches and discussions is the aware­ness that mining per se is something dirty that causes lasting damage to the environment. The discussion about old mining with all its environmentally relevant facets overlooks the core issue of mining activity: the provision of raw materials …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Valentin Goldberg
Daniel Winter
Elisabeth Eiche
Joachim Koschikowski
Thomas Kohl
Diego Morata
Rebecca Schwantes
Peter Seibt
Julian Heboldt
Fabian Nitschke
Prototype Tests for the Treatment of Geothermal Waters for Raw Material Extraction and Freshwater Production

Geothermal fluids are a proven resource for sustainable baseload energy worldwide. Recently the fluids circulated in large volume streams in geothermal power plants have also come into focus for the potential of raw material extraction, such as Lithium. Geothermal fluids are the product of high-temperature and high-pressure water-rock interaction. This results in varying degrees of enrichment of different elements. Among them are elements of economic or strategic interest … …


Order now Mining Report Issue 06_2023 (including this topic)
Read article
Harald Wellhäußer
Imke Birkenstock
Holger Weychardt
All Good Things Come in Threes: Risk Assessment, Operating Instructions and Briefings

Identifying hazards and stresses at work, informing employees about them and the protective measures to be taken are the foundations of systematic occupational health and safety.


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Jörn Nitsch
Günter Klesper
Imke Birkenstock
Take it Sporty: Success in Occupational Safety through Targeted Training

Let’s be honest: What do you think about risk assessments, instructions, personal protective equipment and the like? Do thoughts like: “annoying, boring, only costs time and money, doesn’t help at all” come to mind? But what do you think about sport – skiing, mountaineering, cycling or even skydiving? ­Already much more interesting?


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Hannah Weinbach
Applications of Geophysical Measuring Methods for the Exploration and Securing of Old Mine Workings Near the Surface Using the Example of the Former Lignite Mine Robertshall

During the expansion of the Ehestorfer Heuweg road in the village of Ehestorf, district of Rosengarten/Germany, a daybreak occurred on 11th September 2019, which had a diameter of approximately 0.5 m and a depth of approximately 5 m. Research in the archives of the State Office for Mining, Energy and Geology (LBEG) in Clausthal-Zellerfeld revealed that the probable cause of the collapse can be traced back to the former Robertshall lignite mine, which mined lignite underground here and was in operation until 1922. The collapse suggested that the sand backfill introduced into the roadways crossing under the road during the closure of the mine was not sufficiently stable …


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Olaf Wallner
Peter Goerke-Mallet
Volker Baglikow
WG Heave Phenomena – Insights, Knowledge Transfer, Research Topics, Results

Even before the Act on the Financing of the Phase Out of Subsidised Hard Coal Mining came into force at the end of 2018, the effects of mine flooding on mining damage were increasingly becoming the focus of public attention. In order to pool knowledge on the possible effects of mine flooding on the surface in advance, the working group “Heave phenomena due to mine and groundwater rise” was established on 14th September 2006 by a resolution of the board and the advisory board of the Deutscher Markscheider-Verein e.V.. The working group is made up of representatives from active mining companies, rehabilitation mining, mining administrations, universities and specific institutions


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Torsten Honkisch
Rosa Bögle
Jörg Hausmann
Going Underground: The Großsteinberg Mine in Saxony

This pilot project is based on an initiative being developed by Basalt-Actien-Gesellschaft (Basalt AG) in Linz am Rhein/Germany: While domestic raw materials extraction has for many decades been a cornerstone of the economy and a key factor in the delivery of essential services, rock quarrying today is increasingly caught between the conflicting priorities of industrial production, on one hand, and ecological requirements and social demands, on the other. The ongoing extraction of surface resources is now facing a number of high regulatory barriers. The Großsteinberg open-pit mine, which is owned by the Hartsteinwerke Bayern-Mitteldeutschland, has come up with a solution that is likely to be acceptable to all parties …


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Alexander Mölle
Martin Sobczyk
Matthias Semel
Sensor Data Fusion for Navigation Systems for the Extraction of Raw Materials in the Deep Sea

Copper ores are found in massive sulphide deposits in the rift zones of the oceans. For the exploration and mining of these hydrothermally formed and very small-scale heterogeneously structured deposits, exact position data of the mining equipment used and also of the individual mining tools are required. At depths of over 2,000 m, navigation has to manage without the support of established navigation systems and is carried out using inertial measurement systems. These must be designed to meet the requirements of the deep-sea environment as well as the extreme vibration stresses from the mining process. The use of robust electronic sensors requires …


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Michael Suciu
Successfully Implementing an IoT Solution in the Mining Industry – an Experience Report by talpasolutions

Digitalization and the integration of Internet of Things (IoT) technologies have revolutionized the mining industry, offering strategic and operational advantages. These advancements simplify and optimize various aspects of mining operations, such as resource utilization, business processes and data-driven decision-making. In this article, the author will explore how IoT solutions are transforming the mining sector …


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Ilja Prinz
Sebastian Westphal
BIM – Taking Collaboration in Mining to a New Level

The engineering industry often faces the challenge of extracting knowledge from a wealth of collected information. Without adequate capture, structuring, maintenance and provision of planning information collected over time, there is a risk that essential project knowledge is lost. Building Information Modeling (BIM) has established itself as a widely proven and established method for efficient collaboration, especially in the field of high-rise and infrastructure construction, where it is now considered standard. BIM is a process-oriented approach that involves the creation and management of digital representations of the physical and functional characteristics of a construction project. It enables the actors to access a common data base through …


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Sandra Nowosad
Benjamin Leiding
Oliver Langefeld
Internet of Things and Digitalization for the Circular Economy – a New Lecture at Clausthal University of Technology

According to the 2024 Ernst & Young ranking of top business risk and opportunities in mining and metals, workforce talent recruitment and retention, as well as digital technologies and innovation towards Mining 4.0 remain in the top ten of the outmost challenges for mining. On the first, the industry is conducting several initiatives to address the younger workforce better and to create more attractive workplaces. On the second, not only the industry plays a key role …


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Walter Frenz
Reform of the Approval Regime Under Mining Law?

The debate on the reform of mining law is gaining momentum. What should remain as it is and what should be changed? This question is considered in greater detail from the perspective of the approval procedure under mining law in this article. See issue 3/2022 of Mining Report Glückauf for more information about raw material requirements planning.


Order now Mining Report Issue 01_2024 (including this topic)
Read article
Tobias Rudolph
Peter Goerke-Mallet
Christian Melchers
Change-Management in the Mining-Life-Cycle Needs Trust!

Trust is a valuable asset that must be built and maintained in scientific and technical projects. Especially in projects of the mining life cycle, which are due to the change of the social perception towards a circular value chain, trust is under special observation and has to be built up actively. The difficulties here lie in the transfer of the scientific-technical content in change management for the different target groups, which have different social as well as societal requirements. The transition from the exploration phase to the production phase or from the production phase to the post-mining phase …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Annika Mittmann
Rock Mechanical Issues of the Planned Opencast Mining Lakes

fter the end of lignite mining in the Rhenish mining area, the remaining volume of the three existing opencast mines will be filled with water. The creation of opencast mining lakes on a scale that has not yet been achieved anywhere in the world represents a complex task for the mining company and the responsible authorities. The authorisation and supervisory tasks are carried out by the Mining and Energy in NRW department of the Arnsberg District Government, located in Dortmund/Germany, which is responsible for the entire state.


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Wismut GmbH
WISSYM 2023

Under the motto “Rethinking rehabilitation mining – Innovative approaches on the road to sustainability”, the Wismut GmbH, Chemnitz/Germany, the Association of Mining, Geology and Environment (VBGU), Berlin/Germany, and the International Atomic Energy Agency (IAEA), Vienna/Austria, organized the 5th International Mining Symposium WISSYM 2023 from 25th to 28th September 2023. In Dresden/Germany, 200 participants from 15 countries discussed issues of innovation, technology development and resource efficiency, as well as the highly topical subject of public perception and acceptance of mining within society. The article includes five selected presentations and a summary of the conference results in short form.


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Olaf Alisch
Social Acceptance of Mining and Remediation Projects – the Role of Associations/the VBGU

Awareness of raw materials and the acceptance of mining, remediation and industrial projects has become a key factor for society in Germany. For this reason, increased attention must be paid to this social acceptance. This concerns, among other things, the extraction of raw materials from near-surface raw materials, underground mining projects as well as remediation projects in old mines. Some of the options for achieving social acceptance are outlined in this article. Realisation often requires financial resources that exceed the potential of individual associations. In any case, the time factor is an essential framework condition for the realisation of projects …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Andreas Hucke
Certificate for a Better Future – CERA 4in1 Is the First Holistic Certification System for Sustainability in the Raw Materials Sector

The raw materials sector has recently attracted a lot of attention. Geopolitical conflicts and other crises make supply chains more volatile, raising awareness amongst the wider public of how essential the raw material sector is. This is particularly true for mineral raw materials, as they are essential for the energy transition, climate protection and digitalization. The increased attention leads to noticeably higher demands. The sector should operate as sustainably as possible and be able to prove this sustainable development …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Peter von Hartlieb
Sustainability – Climate Change, Raw Materials, Future

Sustainability requires concrete help from everyone to utilise existing resources in such a way that they are also available for future generations and the world remains liveable. There are differences in the way different age groups understand and implement the concept of sustainability. One study shows that Generation Z – born between 1995 and 2009 – has a greater interest in climate and environmental protection than many older people, while another study shows that young people are calling for sustainable, intergenerationally fair politics and economics. 60 % of young people are in favour of sustainable values such as environmental protection …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Kai van de Loo
Why Is Coal Still Being Phased Out?

The phase-out of coal-fired power generation decided and pursued in Germany on the grounds of climate policy is proving to be increasingly questionable in terms of energy policy. It makes neither an internationally proportionate contribution to CO2 reduction nor an economically convincing contribution to climate-friendly electricity generation at national level. In any case, security of supply will continue to favour an energy mix with coal in the foreseeable future …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Detlef Gürtler
The Opportunities Offered by Sustainability

Sustainability in the raw materials sector is no longer defined purely in ecological terms – securing the raw materials base has become an integral part of the concept of sustainability. This opens up opportunities for German companies, particularly in the area of raw material recovery and the development of processing capacities in the Global South …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Anglo American PLC
Anglo American’s Path to Sustainable Innovation

The mining methods and equipment we deploy today are unlikely to be acceptable in the future. Stakeholders are rightly demanding that we must do better in the way we mine, while delivering safe, repeatable and consistent operational performance. As we strive to meet society’s demand for metals and minerals in a responsible and productive manner, we have the chance to embed the latest thinking and technologies into safe and sustainable modern mine designs …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Benjamin Fadavian
Thomas Blumenhoven
Transformation Process in Mining Using the Example of Herzogenrath

The town of Herzogenrath/Germany, north of Aachen, has a long mining history that stretches from the 12th century to the 1970s. Since then, the town, which is close to the Dutch border and the town of Kerkrade, has undergone an interesting structural change. Modern technology centres are now located where for decades people worked underground. Mines and tailings heaps have become local recreation areas. The development of the town of Herzogenrath is a blueprint for other towns in the region and shows how the economy and infrastructure can be adapted to the post-mining era …


Order now Mining Report Issue 02_2024 (including this topic)
Read article
Martin Wissen
Philipp Hensel
Andreas Herzog
Reorganisation of the Haus Aden Mine Water Pipeline – Special Challenges when Crossing Under the Datteln-Hamm Canal

Haus Aden is the only dewatering site in the eastern Ruhr district that will discharge mine water into the River Lippe in the long term. The reorganisation of the Haus Aden mine water pipeline is being carried out as part of individual final operating plans under the regime of mining law. To implement the project, RAG Aktiengesell­schaft, ­Essen/Germany, must submit a large number of operating plans for the individual construction phases for approval. The reorganisation of the Haus Aden mine water pipeline should be completed in 2025 so that mine water can be discharged into the Lippe when the target level is forecast …



Order now Mining Report Issue 03_2024 (including this topic)
Read article
Martin Wedig
Sustainability Trends in Mining

The topic of “sustainability in mining” is by no means new in Germany and has been repeatedly rethought as a result of technological developments since the time of Georg Agricola. However, it was the 1972 study “The Limits to Growth” that first raised public awareness of the finite nature of natural resources and initiated a continuous rethink. As a result, ways have been found to extract and utilise raw materials more efficiently and sustainably than before. Sustainability in mining in Germany is applied as foresightedly, efficiently, resource-conserving, energy-saving and cost-effectively as is technically possible. In the future, however …



Order now Mining Report Issue 03_2024 (including this topic)
Read article
Sunny Schoone
Innomotics a New/Old Player on the Global Market – Redefining Reliable Motion for a Better Tomorrow

The industrial ecosystem is currently undergoing major changes. Global drifts in the markets, new advanced technologies, new market requirements, but also the ever-increasing demand for higher efficiency and sustainability are moving all segments of industry. In order to be able to accompany this change as a partner, the Large Drive Application Division of Siemens AG, Berlin and Munich/Germany, was reorganized as Innomotics. Based on 150 years of experience in the industry as an expert in electrification, automation and digitalization, Innomotics identifies with these challenges and the industry.


Order now Mining Report Issue 03_2024 (including this topic)
Read article
Wolfgang Reimer
The Geokompetenzzentrum Freiberg e.V. (GKZ) – a European Mining Network

The Geokompetenzzentrum Freiberg e.V. (GKZ), Freiberg/Germany, unites industry, universities, specialist authorities and local authorities as a network along the entire value chain of mineral raw materials and the development of conventional and renewable energies in the sense of a circular economy. The association focusses on research and development (R&D), training and further education as well as market exploration and national/international networking. It has a high level of visibility within the EU through project and committee work and complements the work of other German professional organisations and …


Order now Mining Report Issue 03_2024 (including this topic)
Read article
Michael Berner
Tobias Pinkse
Sadia Riaz
Slurry Transport System of the ROBOMINERS Prototype

The increasing need of raw materials necessitates the exploitation of new deposits, potentially leading to (very) deep underground mines. With the help of fully automated machines and/or autonomous robots it is aimed to open difficult to access deposits or re-open abandoned mines. In the past four years, the consortium of the European-wide H2020 Resilient Bio-inspired Modular Robotic Miners (ROBOMINERS) project has conducted initial baseline studies of future robotic mining machines operating in such scenarios. Technologies have been investigated, which can be applied for underground exploration and selective mining, submerged and/or operating in slurries. Throughout this project a low TRL prototype has been developed and tested, which is fully water-hydraulically powered. The prototype comprises an unconventional locomotion system, various sensors for navigation and perception …


Order now Mining Report Issue 03_2024 (including this topic)
Read article
Swen Aurich
Martin Sobczyk
Matthias Semel
Stefan Wegerer
Framework Conditions for Automated Milling Wheel Replacement under Deep Sea Conditions

As part of the „Deep Sea Sampling“ research project, a trench cutter adapted for the extraction of marine massive sulphide ores shall be lowered from a ship into the deep sea and positioned and aligned on the seabed with the help of a landing unit (1). Once there, the system shall cut several slots into the rock at defined locations and convey the copper-bearing ore extracted in the process into containers, which can be separated from the system and transported back to the ship. Due to the large distance to the supply ship and since the milling tool wear out during extraction, it must be possible to change them directly on the seabed and without additional plant movement …


Order now Mining Report Issue 03_2024 (including this topic)
Read article
Markus Mathey
Surface Blast Vibrations from Underground Shotfiring at Moderate Depths

The Heilbronn rock salt mine, which is owned by Südwestdeutsche Salzwerke AG, Heilbronn/Germany, has already carried out several trials aimed at reducing the impact of blast shocks occurring at ground level. Salt extraction is carried out at a moderate depth of around 200 m and targets the shelly limestone formations of the Triassic period. The relationships being investigated in the study were focused on the firing conditions for “top cuts” and “bottom cuts”, the multiple use of similar ignition time stages in the shotfiring pattern (and the potential increase in the specific quantity of explosive per timer stage), the distance between the blast sites and the surface measuring points and the chosen ignition intervals for the shotholes …


Order now Mining Report Issue 03_2024 (including this topic)
Read article
Thomas Große
Frank Reuter
Hose Physics in the Fire Service: An Update Using the Gollmer & Hummel Titan X-Treme as an Example

Fire hoses have been an elementary component of fire-fighting equipment since ancient times. The properties of the hoses have been improved through constant further development in production. Milestones were the development of hose lines made of canvas in the 17th century, the first rubberised hoses in 1865 and the introduction of the Storz coupling as a standard coupling. However, pressure loss tables from the 1930s are still used in fire service training in Germany today. There are also more recent tables with widely varying values without precise references. Due to the need to pump water over long distances and …


Order now Mining Report Issue 03_2024 (including this topic)
Read article
Bodo Bernsdorf
Tobias Rudolph
Peter Goerke-Mallet
Melanie Gendrullis
Thomas Adam
Christoph Uphues
Andreas Koschare
Benjamin Haske
Risk and Safety Management for Surveying Work in Underground Cavities that Are Difficult to Acces

On 28th and 29th August 2023, scientists from the Research Center of Post-Mining (FZN) at the TH Georg Agricola University (THGA), Bochum/Germany, carried out a special task. The Paasbach piping, a tunnel structure under and in the area of the Hattingen Henrichshütte, was surveyed above and below ground. The tunnel was relocated several times over the years as the Henrichshütte grew, and the exact course was not known. The City of Hattingen’s Departments of Public Works and Civil Engineering feared structural damage that could lead to severe consequences of parts of the piping, e. g. in the area of roadways. In order to plan the necessary renovation measures, it was first necessary …



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Kai van de Loo
Julia Haske
Public Perception and Community Participation in the Coal Transition in the Ruhr Region – Interim Results of the EU Research Project WINTER

The EU research project WINTER is developing a web-based interactive management tool for the structural change of coal regions. The basis is formed by three pilot regions in the EU in or on the way to post-mining, including the Ruhr area. Part of the analyses required and carried out in this context are public perception and community participation in the coal transition. Results are presented here.



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Hans-Peter Noll
The UNESCO World Heritage Site Zollverein: Monument and Future Hub

Since its designation as a UNESCO World Heritage Site in 2001, the former Zollverein coal mine and coking plant has evolved into an outstanding example of successful structural transformation. This transformation is based on the principle of “preservation through reuse”. Therefore, the Zollverein Foundation in Essen/Germany tasked with this project, not only has the mandate for monument preservation and education, but also shapes the future development of the site for various uses.



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Valentin Vossen
Stephan Bachmann
Jan Pfänder
Robin Hoffmann
Restoration of Mine-Water Drainage through the Royal Bavarian Maximilian Heritage Gallery at Stockheim

Hard coal mining around Stockheim and Reitsch, which are townships in the Kronach district of Upper Franconia in Bavaria/Germany, commenced in 1756 and finally ceased in 1968 as the operation had become uneconomical and the deposits were running towards depletion. When the workings were closed insufficient attention, by the standards of today, was paid to securing some of the mine entrances and protecting the near-surface openings and access points. After 1984 sinkholes began to appear in the Stockheim area above the main drainage adit, the Royal Bavarian (K. B.) Maximilian heritage gallery. It became apparent that all the surface entrances and near-surface workings and the problem of draining the old mine workings in general, now posed a significant risk …



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Sebastian Hillinger
Nikolaus Linder
Philipp Philipp
Renovation of a Flooded Water Release Tunnel: Wilsmicker and Altenberger Tunnels in Wenden
in the Sauerland

In January 2023, a spontaneous outflow of water occurred in front of a residential building in Wenden in the Sauerland/Germany. The water flow was linked to the head of an old drainage shaft, which was connected to a wide mining gallery. Immediately after the damage, ad hoc investigation and security measures were initiated. After weighing up the pros and cons of various rehabilitation options, a solution was favoured which would continue to drain the tunnel system under overflow conditions (pressure heads above the tunnel system). A collapsed area within the tunnel was renovated and long-term dewatering shafts (drainage-buildings) with open channels were installed on top of the tunnel. Finally, the surface was restored and shaped …



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Mareike Schubert
Jens-André Paffenholz
Oliver Langefeld
Investigation of Historic Mining Infrastructure in the Upper Harz Mountains and Development of Repurposing Concepts

The Upper Harz in Germany is historically characterized by hydrothermal vein mining, which was carried out from the Middle Ages until the 20th century. The region was one of the most important mining centers in Europe, famous for its silver, lead and zinc deposits. Many relicts of this intensive mining activity can be found underground, including extensive drainage systems for the management of mine water. Researchers at Clausthal University of Technology (CUT), Clausthal-Zellerfeld/Germany, are intensively studying this old mining infrastructure to explore … …



Order now Mining Report Issue 04_2024 (including this topic)

Read article
Ingo Milas
Nicole Reinermann
Stolberg Sinkholes: the Role of the Mining Authority in Cases of Non-Mining Sinkholes

In 2022, a sinkhole in the northern part of the city of Stolberg in North Rhine-Westphalia was reported to the Arnsberg District Government, Department Mining and Energy in NRW, Dortmund/Germany. Due to the known old mining in the area, a mining cause for the sinkhole could not be ruled out. However, during the course of the investigation, it was determined that the cause did not originate from the previous mining activities. Even in the case of damage that turns out to be unrelated to mining, as in this case, a pragmatic approach by the authorities and other bodies involved ensures that the danger is averted immediately and in a coordinated manner.



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Matthias Bock
Tobias Friedrich
Peter Goerke-Mallet
The DGGT & DMV Working Group “Post-Mining”. Development, Results and Perspectives

Due to the mining influence on many protected goods, there is considerable interest in many countries in dealing with abandoned mines and post-mining issues in an orderly manner. Mining leaves behind a wide range of challenges and unresolved tasks worldwide, often with negative impacts on people and the environment, as well as restrictions on the subsequent use of areas affected by mining. However, the post-mining period also offers many perspectives, taking into account the mining risks. This requires experts who are familiar with the technical interrelationships of the impacts of mining and who can use this knowledge to develop planning principles for subsequent use. For over 30 years …



Order now Mining Report Issue 04_2024 (including this topic)
Read article
Denise Strauch
Lydia Ziemer
Hazard Analysis for Non-Metallic Mining Operations Under Mining Law – Responses to the July 2021 Flood Event

In July 2021, heavy rain caused the river Erft to flood, leading to flooding of the village of Blessem and the Blessem open-cast mine and its tailings ponds, which are located north of Blessem. As a result, an uncontrolled erosion area formed in the area, in particular due to retrogressive erosion, at the gravel pit, at the Erft and up to the northern outskirts of Blessem.



Order now Mining Report Issue 05_2024 (including this topic)
Read article
Angela Binder
Mareike Schubert
Oliver Langefeld
Systematic Survey to Assess Gender Equality in the Mining Sector

Gender equality remains a critical issue in the mining sector, particularly in Germany, where the challenges faced by women are often inadequately addressed. This study aims to systematically assess these challenges and the current state of gender equality among female professionals in mining. The goal is to gather an initial understanding of gender equality issues in this context and to formulate actionable measures for improvement. A survey was conducted involving approximately 60 women in the mining sector, utilizing both quantitative and qualitative analysis of their experiences and perspectives. Data were collected through structured interviews conducted online, focusing on various aspects of gender-specific limitations, motivation and role models. The findings reveal significant barriers to women’s equal participation, including sexualized violence, discrimination in application processes, unequal opportunities for leadership positions and male-centric equipment in …


Order now Mining Report Issue 05_2024 (including this topic)
Read article
Isabel Knauf
Angela Binder
Mareike Schubert
On Excuses, Overcoming Resistance and Recognition: Interview with Isabel Knauf, West Germany’s First Woman Underground

Isabel Knauf is an outstanding leader in German industry and a member of the Partners’ Committee of the Knauf Group, one of the world’s leading companies in the building materials sector. Since 2002, she has held various positions within the family-owned company, most recently as a member of the Group Management Board with overall responsibility for Southern Europe, the Middle East, South Asia and Africa. Isabel Knauf studied engineering at RWTH Aachen University, Aachen/Germany, specializing in mining and graduated with a “Diplom-Ingenieur” degree equivalent to a master’s in engineering. She has set a remarkable example for women in the industry: She was the first woman in the then European Union to obtain the so-called underground license in this engineering profession, which allows her …


Order now Mining Report Issue 05_2024 (including this topic)
Read article
George Barakos
Angela Binder
Andrea Brickey
Natalija Pavlovic
Alexandra Radl
Emily Sarver
Mareike Schubert
The Role of the Society of Mining Professors in Promoting Gender Equality in the Field of Mining

The Society of Mining Professors (SOMP) forms a global community of academics dedicated to advancing mining engineering and related sciences. Their primary aim is to promote scientific, technical and professional knowledge to ensure a sustainable supply of minerals and support responsible mining practices. Through information exchange, the promotion of research and teaching partnerships and other forms of collaboration, SOMP significantly contributes to the advancement of raw materials sciences. A particular focus is on supporting the professional development and social awareness of its members. These efforts aim to increase the representation of women in this field and promote gender equality. Membership in the SOMP is open to all who are directly involved or associated …


Order now Mining Report Issue 05_2024 (including this topic)
Read article
Nguyen Thi Hoai Nga
Angela Binder
Mareike Schubert
Progress in the Area of Gender Equality in International Mining: Interview with Prof. Dr.-Ing. Nguyen Thi Hoai Nga

Pof. Nga Nguyen serves as the Head of the International Office and Senior Lecturer at the Mining Management Department of Hanoi University of Mining and Geology (HUMG), Hanoi/Vietnam. Prof. Nguyen holds a Doctor of Engineering degree from RWTH Aachen University/Germany and a Master’s in Mining Management from HUMG. Her extensive career spans multinational project management, capacity building and fostering educational collaborations, particularly in the cooperation of south-east-Asian countries and especially her home country Vietnam with Germany. Her research and professional activities are centered on natural resources governance, sustainable development in the mining sector, and enhancing …


Order now Mining Report Issue 05_2024 (including this topic)
Read article
Angela Binder
Mareike Schubert
Oliver Langefeld
Integration of Gender Aspects in Mining Engineering Education

Despite progress in increasing female representation in the mining industry, women remain significantly underrepresented, also in mining engineering education. This paper aims to address gender disparities in mining engineering education by proposing three gender-related goals: empowering women, preventing discrimination and strengthening gender and diversity competencies. Specific measures are identified for each stage of the student life cycle, including overarching themes as a zero-tolerance area for discrimination, gender-sensitive language and training for educators. The implementation and planning needs various stakeholders from which lecturers, role models, industry representatives and experts for awareness and gender-sensitive education hold a key position. Most importantly, students are also identified as key stakeholders, highlighting the importance of …


Order now Mining Report Issue 05_2024 (including this topic)
Read article
Barbara Dischinger
International Women In Mining (IWiM)

In a mining landscape that is under intense scrutiny, and where societal expectations converge with regulatory requirements and investor demands, the relevance of diversity, equity and inclusion (DEI) has never been more pronounced. Commitment to nurturing diverse talent, addressing gaps and promoting inclusive practices is not only a strategic imperative, but the cornerstone of a thriving and sustainable industry. The recent changes in the industry – from the International Council on Mining and Metals (ICMM)’s strategic embrace of DEI (1) to the evolving landscape of voluntary standards – show that there is growing recognition of the transformative power that diversity brings to business. The world is at the intersection of the challenges in the area of the workforce, the digital transformation and the need to advance … …



Order now Mining Report Issue 05_2024 (including this topic)
Read article
Thomas Ahlbrecht
Mareike Schubert
Angela Binder
Gender Equality in Mining: Interview with Thomas Ahlbrecht, Authorised Signatory of Redpath Deilmann GmbH

Thomas Ahlbrecht is the department head and authorized representative at Redpath Deilmann GmbH, Dortmund/Germany, where he has contributed a wealth of experience since 1986. With a degree in mining engineering from the TH Georg Agricola University (THGA) in Bochum/Germany, he initially worked in the German hard coal mining industry before becoming a leading expert in shaft construction at Deilmann. His insights, which he shares both internally and as a guest lecturer at Clausthal University of Technology (CUT), Clausthal-Zellerfeld/Germany, read like a comprehensive guide on the construction, operation, modernization and rehabilitation of shafts and …



Order now Mining Report Issue 05_2024 (including this topic)
Read article
Victoria Dietrich
The Role of Women in Mining

Little is known about the important role of women in the mining industry. However, without the female workforce, life in the mining state would have been quite different. This text attempts to describe and pay tribute to the lifetime achievements of women in the mining industry.



Order now Mining Report Issue 05_2024 (including this topic)
Read article
Dany Bodenstab
Alexander Proske
Solution Concepts for Mining and Geomechanical Challenges Involved in Safe Long-Term Closure of the Saale Shaft in the Teutschenthal Mine

The former Teutschenthal potash mine, with mine sections Teutschenthal, Angersdorf and Salzmünde, is currently operated as a backfilling mine by GTS Grube Teutschenthal Sicherungs GmbH & Co. KG (GTS). In accordance with the Ordinance on Underground Waste Stowage (VersatzV, 2002), the four shafts connected to the mine, as elements traversing geological barriers, must be sealed off for long-term safety at the end of the operating phase using state-of-the-art closure structures. Here it is necessary to prevent groundwater and surface water from penetrating the mine through the shafts, while at the same time preventing polluted solutions from escaping the mine and entering the biosphere. The Saale shaft is currently the first shaft at the mine site to be safeguarded for the long term. This article examines in detail the importance of long-term safeguarding, the methods used as well as the particular challenges during project implementation …


Order now Mining Report Issue 06_2024 (including this topic)

Read article
Michael Breemann
Bochum-Based Company ECOSOIL Is Securing the Double Shaft at the Former Vondern Hard Coal Mine – with an Experienced Team and the “Installation of a Cohesive Filling Column Section” Securing Variant

ECOSOIL Nord-West GmbH, Bochum/Germany, is carrying out a shaft renovation using a cohesive partial filling column, including dismantling and refilling of the “Vondern 1 and 2” double shaft system together with a ventilation duct on behalf of the steel division of thyssenkrupp. The plant belongs to the former Vondern mine (a hard coal mine from 1902 to 1932) and is located in a nature reserve between the A42 motorway and the course of the Emscher river. The procedure is coordinated in accordance with the district government’s guidelines for the maintenance of day shafts and the long-term securing of former shafts.


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Elke Mugova
Christian Wolkersdorfer
Science Communication in the Mining Sector: Insights from the “Forum Mining and Water” Foundation

This study describes the options of science communication based on experiences of the German foundation “Forum Mining and Water”. After the cessation of German hard coal mining, the foundation aims to address the topic of mine water and mine flooding. Since its establishment in 2017, various communication formats have been employed by the foundation to disseminate its research findings and to address different target groups. All communication measures were aimed to communicate technological, ecological and social aspects of mine flooding in easily understandable formats and to promote dialogue between science, politics, business and society. As can be seen by the results, the foundation reached many target groups with the communication formats applied. Furthermore, it demonstrated the importance of …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Martin Wedig
Securing Raw Materials for the Transformation

Against the backdrop of diverse and overlapping transformations in Germany, such as the energy transition, electromobility, digitalization, climate change and the green transformation as a whole, secure access to high-tech raw materials is of central importance. It is also important to maintain the innovative strength and competitiveness of German industry and to upgrade the infrastructure for the future. In the coming decades, this will require the conversion of infrastructure in step with the expansion of energy generation capacities, the expansion of power lines and grids, charging infrastructure, storage, fiber optic and hydrogen networks. By 2045, primary energy and electricity will be generated almost entirely from renewable sources and greenhouse gas neutrality will be achieved. By then, coal and gas-fired power stations will have been largely replaced by wind and solar power …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Thomas Hollenberg
Raw Materials Agreement Germany – Mongolia: Challenges in Supplying the Federal Republic of Germany with Critical Raw Materials

Mongolia has occupied a key position in the global mining sector. The country is one of the ten most resource-rich countries in the world. In the south of the country, which has a very sparsely populated population of around 3.4 million, in the Gobi Desert, there are gigantic deposits of copper, silver, gold, coal, fluorspar and other raw materials that are among the largest in the world. Mongolia has attracted international attention, particularly because of its integral role in the extraction of critical raw materials. Mongolia’s geology, which is characterized by diverse mineral-rich strata from the Precambrian to the Quaternary, forms the basis for the country’s mining potential. Above all, the country has an abundance of rare earth elements (REEs), which are essential for cutting-edge technologies and the energy transition. This report analyses the geological formations that underlie Mongolia’s resource wealth …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Thomas Neu
Terechrecht – a Well-known Mauritanian Deposit for Rare Earths Is Rediscovered

Mauritania is rich in raw materials. Gold, iron ore or copper are mined on an industrial, modern scale. Oil and natural gas are also produced. Artisan mining takes place on gold, rock salt or gypsum. In addition to other raw materials, the Mauritanian part of the phosphate deposit already used in Senegal or the Terechrecht rare earth deposit southeast of Akjoujt are being explored. Mauritania is the second largest producer of raw materials in Africa. The article is based on the author’s presentation at the GDMB seminar “Rare Earth 2024” from 20th to 21st March 2024 in Clausthal-Zellerfeld/Germany. It is published in memoriam Lemrabott Mohamed El Moctar, initiator and investor, Nouakchott, died in 2022.


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Matthias Semel
Leonard Weixler
Martin Sobczyk
Copper for the Energy Transition

The world’s energy supply is changing – from the direct use of fossil fuels to generate electricity, to so-called renewable energies. Furthermore, the expansion of e-mobility and increased demand for information technology require additional grid and generation capacities. Copper, which is essential for all power supply systems and grids, plays a central role. The rapidly increasing demand for copper is already leading to sharp price increases and requires a significant expansion of copper ore extraction. The extraction of copper ore from massive sulfide deposits in the deep sea can make a profound contribution to secure supply. The necessary technology is currently being developed. A long-term strategy up to 2035 for the development of these resources – in the German license area in the Indian Ocean …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Kai van de Loo
IEA Recommendations for “Just Transitions” in the Coal Sector

In spring 2024, the International Energy Agency (IEA) presented a new special report on the international coal sector. This is addressed to the global community. However, the IEA’s well-founded recommendations also allow energy policy conclusions to be drawn for the phase-out of coal-fired power generation that has been decided on, planned and launched in Germany. This is by no means without alternative. The IEA is also looking at how to accelerate the decommissioning of coal-fired power plants and how to deal with this appropriately. However, these recommendations are by no means aimed at a total coal phase-out, but primarily at accelerating the reduction of “unabated coal”, i. e. coal use without measures to reduce emissions. At the same time, pragmatic strategies for climate-friendly coal-fired power generation are being discussed. This would be possible in Germany as well as in many other countries. At the same time, the IEA emphasises …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Bastian Reker
Sebastian Westermann
Peter Goerke-Mallet
Christian Melchers
Remining of Mine Water and Tailings – an Initial Assessment

Te IAW33 research project “Innovative processing technologies and their potential for the recovery of recyclable materials from mine water, precipitates and tailings from the Ruhr, Saar and Ibbenbüren areas with special focus on critical metal resources”, which the Research Center of Post-Mining (FZN) at the TH Georg Agricola University (THGA), Bochum/Germany, launched in 2022, has been engaged in investigating the possibilities for recovering critical and valuable raw materials from mine water and its associated precipitates. This required the development and construction of precipitation reactors with volume capacities ranging from 500 to 1,000 l that use precipitation reactions and co-precipitation processes to recover iron and other metals …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Abiel Menghisteab Ghebreigziabiher
Stephanie Lohmeier
Tailings – Environmental Risks or Future Raw Material Resources?

Modern society relies on mining and quarrying to secure a steady supply of mineral resources supporting technological advancements and elevated living standards. Products of mining are crucial for various technologies, while waste, in the form of tailings, poses considerable environmental risks. This review explores the dual nature of mine tailings, examining both their adverse environmental impacts and their potential for resource recovery. Case studies from Peru and Chile illustrate the environmental consequences of tailing spills and the subsequent impacts on ecosystems …



Order now Mining Report Issue 06_2024 (including this topic)
Read article
Shima Hajinia Leilabadi, Bernd G. Lottermoser, Michael Roach, Emmanouil A. Varouchakis, Evangelos Machairas, Felipe González Barrionuevo, Manuel Toscano Macia, José Miguel Nieto
The IMMERSE Project: Virtual Excursions on Critical Raw Materials for the Clean Energy Transition

Critical raw materials (CRMs) play a pivotal role in the transition to clean energy and the achievement of the European Green Deal, contributing significantly to the realization of the United Nations Sustainable Development Goals (SDGs). A sustainable supply of CRMs is fundamental for all industrial sectors and will determine the destiny of Europe. Strengthening local production and sustainable management of these resources are crucial to reduce dependence on imports and ensure a secure and resilient supply chain. As the focus on sustainable resource practices grows …


Order now Mining Report Issue 06_2024 (including this topic)
Read article
Thorsten Koth
Effective Dust Control in Mining Means Significant Cost Savings

ScrapeTec specialists are continuously working on developing reliable solutions for specific issues at transfer points in conveyor systems where dust and spillage are a problem …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Kai van de Loo
Renewable Energies Instead of Domestic Coal: an Interim Assessment

The planned coal phase-out and the energy transition with their climate policy targets in Germany are linked to the expectation that domestic coal and thus coal mining will be completely replaced by renewable energies. To a considerable extent, this has already happened in this country. However, the consequences for the energy industry have hardly been explicitly considered and analysed from this perspective so far. So it is time to take a sober and fact-based look at the situation and highlight this aspect …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Gregor Dilger
Bodo Lehmann
How Can Deep Geothermal Energy Support the Heating Transition in Germany?

Deep geothermal energy, as a reliable and sustainable source of heat, will play a decisive role in the heat transition in Germany. This technology uses the geothermal energy stored in deep geological layers to heat buildings and support industrial processes. In contrast to fossil fuels, geothermal energy is (virtually) emission-free and is available continuously and virtually everywhere, regardless of weather conditions and fuel imports. A key advantage of deep geothermal energy is its ability to feed large quantities of heat directly into urban district heating networks. This can significantly reduce the need for fossil fuels and lower CO2 emissions …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Bodo Lehmann
Boris Dombrowski
Exploration, a Key Element in the Deep Geothermal Energy Value Chain

The article discusses strategies to optimize and accelerate deep geothermal exploration to reduce costs and risks and increase success rates. Exploration methods such as airborne and ground geophysics, seismic measurements and microseismics are discussed. Seismic exploration includes preparation, measurement and evaluation, with 3D seismic requiring more resources than 2D seismic. Challenges in urban regions and alternative utilization techniques such as petrothermal systems are outlined. All phases of a geothermal project from planning to operation are described …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Carola König
Issuing Mining Licences for the Exploration of Geothermal Energy – a Contribution to the Energy Transition

Due to recent global political events, the importance of a year-round stable and secure energy supply from reliable sources has become unmistakable. The fuels required to secure our national energy supply are imported on a large scale, in some cases from countries that are considered politically unstable. In order to achieve the necessary increase in independence, it is therefore obvious that, in addition to diversifying the sources of supply, every effort should be made to preferably utilise domestic energy sources to cover energy requirements. The utilisation of geothermal potential can have particular advantages over other renewable energy sources. The exploration of the subsurface with regard to its geothermal potential and …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Timm Wunderlich
Lukas Oppelt
Tom Ebel
Fritz Raithel
Willi Krause
Thomas Grab
Tobias Fieback
Status Quo, Potential and Challenges of Using Mine Water for Energy Generation

Restructuring the energy supply has intensified in focus since the recent geopolitical events in conjunction with the concern over the shortage of fossil fuels. In addition, the targets of greenhouse gas neutrality in the transport, electricity and heating sectors must be achieved by 2045, which is reinforced by the Federal Climate Protection Act. In 2023, the German heating sector, the largest single sector, only obtained around 18.8 % of its 1,090 TWh from renewable sources. (1) Heterogeneous and decentralised heat sources will become more important as the share of fossil fuels is reduced …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Denise Strauch
Christian Biermann
Underground Storage of Hydrogen in the Epe Cavern Field

ue to the strong volatility and seasonal dependency of power generation from renewable energies, it is essential to develop storage options with very high capacities in order to realise the energy transition. The aim is to store the energy that can be generated in times of plenty of wind and sun, but is not needed at those times, so that it can be used when demand is high and generation is low. Caverns that have been salted out or used for …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Walter Frenz
The Changing Face of Mining for Electricity

In the past, mining was the backbone of the electricity supply. In the future, this is to be secured entirely by renewable energies. However, this also requires raw materials and thus mining. Therefore, mining must be secured to this extent. The Critical Raw Materials Act has defined important cornerstones for this, which should also be implemented in national mining law …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Kai van de Loo
Just Structural Change for Coal- and CO2-Intensive Regions in the EU? The Just Transition Mechanism (JTM) Between Market-Based Adjustment Aid and Planned-Economy Control Mania

The coal phase-out, which is now being targeted in practically all EU member states, has been accompanied at the European level since 2017 by the European Coal Regions in Transition Initiative. Since 2020, this has been embedded in the Just Transition Initiative, which has been expanded to include regions with CO2-intensive industries, with the establishment of the so-called Just Transition Mechanism. As part of this “mechanism”, these initiatives will not only receive considerable funding from the EU budget, initially until 2027 with a follow-up perspective for the period after that – the new EU Commission will set the guidelines for this …



Order now Mining Report Issue 01_2025 (including this topic)
Read article
Daniel Wagener
Nicole Malz
Monika Wölfl
Fiona Groppe
Risk Mamagement of Old Mining: Developments in 2023 – from Automation to Water-Bearing Tunnels

Since 2011, the NRW mining authority, Dortmund/Germany, has been running a risk management programme for old mining with a focus on surface entrances. Over the past 13 years, 4,542 documented surface entrances located in the area of responsibility of the state of North Rhine-Westphalia have been included in the risk management system for abandoned mines and assessed in terms of potential risk. Of these, 284 surface entrances have already been explored on site and remediated without aftercare. In 2023, the introduction of a special risk management module in the mining information system (BIS) of the NRW mining authority …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Dzianis Iholka
Accelerating Return of Investment: Changing Potash and Polyhalite Mine Development by Rapid Shaft Sinking Technologies

The article examines the global landscape of potash and polyhalite mining projects and highlights key trends in vertical shaft development over the past two decades. It examines the advantages of rapid shaft sinking, including faster project delivery, reduced capital expenditure and improved investment payback periods. Furthermore, we delve into innovative mechanized excavation techniques and case studies demonstrating their impact on modern mine construction. By using advanced methodologies and optimised project execution strategies, the mining industry can significantly improve efficiency, ensure faster time to market and maximise long-term …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Thomas Jenßen
BIM Implementation in Shaft Sinking Projects: Case Example Suedlink Shafts Project

Shaft sinking has a long tradition in Germany. There are hundreds of examples of successful planning and execution both in Germany and abroad. Shafts built for different applications and under a variety of conditions differ technically from one another. Not only the dimensions and the design, but also and especially how the shafts are sunk. There are detailed regulations describing the technical aspects as well as the qualitative and technical requirements for components and structures. The contractors and designers are familiar with the control and approval processes, and it can be assumed that constructability and safety are taken into account in planning and execution …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Tobias Kornblum
Uwe Blei
Challenges Vertical String Konrad 2 Shaft

The Konrad mine is the first final repository for low- and intermediate-level radioactive waste in Germany approved under nuclear law. The approval process started in 1982 and the approval finally became legally binding in 2007. Due to the requirements of the approval situation and the requirement to build according to the current state of science and technology, there are special challenges that need to be met. The article provides a rough overview of the large number of approval-related requirements as well as the additional provisions of the planning approval decision that must be adhered to. After a brief overview of the entire system on Konrad 2 shaft …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Alexander Mölle
Martin Sobczyk
Condition Analysis of Rigid Guidance Systems Using Inertial Sensors

Shafts are the bottleneck of a mine and are essential for smooth and uninterrupted operations. Therefore, their availability is of central importance. Due to the high stresses placed on shafts and their conveyor systems by high humidity, moisture and the transportation of abrasive mining products, the shaft guide rails in particular are subject to intensive wear. (1) According to the Mining Ordinance for Shaft and Inclined Conveyor Systems, rigid guide systems, which include the wooden or steel guide rails installed in the shaft, must undergo an annual inspection in systems with a driving speed of more than 4 m/s and more than 400 trips per day. This inspection is carried out by a certified expert by means of geometric measurement, kinetic (acceleration) measurement or dynamic (force) analysis …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Bahador Khoshabadi
Stephanie Lohmeier
Industrial Prospects of Marble Quarry Waste: an Analysis of Calcium-Carbonate Applications (Shayan Quarry, Fars Province (Iran))

The Shayan marble quarry in the Fars province (Iran) produces high-quality dimension stones, i. e. calcite marble blocks, but faces a significant challenge as about 90 % of its extracted material is discarded as waste because of intense tectonic-induced fracturing. Geochemically composed of almost pure calcium-carbonate with only traces of unwanted impurities (Al, As, Fe, K, Mg, Na, Pb and Si), this study explores alternative industrial applications for the “marble waste material”. In cement production, the material’s compliance with geochemical standards suggests a possible use as primary raw material. Similarly, the marble properties align with specifications for quicklime production, offering opportunities …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Christel Füllenbach
Developments and Challenges in the Field of Digital Maintenance

The ongoing digitalization and automation of maintenance strategies has established itself as a central factor for optimizing operational processes in recent years. Particularly in technically demanding industries such as mining, efficient maintenance is essential to minimize unplanned downtime, high maintenance costs and safety risks …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Swen Aurich
Martin Sobczyk
Matthias Semel
Stefan Wegerer
Kinematics Test with a Cutter Wheel Quick-Change System

In addition to the utilisation of terrestrial deposits, maritime ore deposits can also be explored to secure the supply of raw materials, especially copper. Massive sulphide deposits in the deep sea can make a significant contribution (1), if there is a way to extract these ores economically and safely. The Deep Sea Sampling joint project of the Federal Ministry for Economic Affairs and Climate Action (BMWK) aims to make an important contribution here by adapting a milling process that has been tried and tested on land for many years for use in ore mining on the seabed. In order to realise this ambitious project …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Walter Frenz
Mining 4.0, AI and Law

Artificial intelligence (AI) becomes more and more important in smart mining – like in the European Union. According to its Competition Compass of January 2025, one of the Commission’s priorities is to promote investment in future technol-ogies such as AI. What legal framework is already in place, including for digitalization? What access and protection requirements exist for companies? Which possibilities have enterprises to use the data?


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Peter von Hartlieb
Mining Machinery Markets on the Move: Example China

European and German industry and all commerce will never be self-sufficient in the supply of critical raw materials. We are and will remain dependent on imports from third countries. The EU is now more aware of the importance of international trade and the risks associated with its dependence on a limited number of dominant supplier countries. The EU has identified over a hundred critical raw materials and classified a double-digit number of them as strategic raw materials that are essential for our economic stability. Strategic raw materials include lithium, cobalt, natural graphite and nickel for battery production, metallic silicon for semiconductors and rare earth elements …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Maximilian Weber
Bernd Lottermoser
Samira Khodaei
Mihail Padev
Anders Petruschke
Antonia Markus
Esther Borowski
Ingrid Isenhardt
Interactive Multi-User Hologram Tables for Practical Knowledge Transfer in Mining and Mineral Resource Sciences

The spatial understanding of complex 3D structures is essential in geosciences and mineral resources engineering, but traditional teaching methods are limited. Multi-user hologram tables enable an immersive learning environment through interactive and collaborative 3D visualisations that allow students to analyse geological structures and mineralogical samples together, annotate and intuitively grasp spatial contexts. The Holo-4-Edu research project investigates integrating 3D multi-user hologram tables into mining and raw materials science and (dental) medicine courses. The aim is to promote the spatial understanding of complex geological structures and …


Order now Mining Report Issue 02_2025 (including this topic)
Read article
Wolfgang Dronia
Philipp Hensel
Jürgen Kugel
Jörg Tuschmann
Martin Wissen
Mine Water Management of Hard Coal Mining for Eternity – Development, Current Situation and Outlook for the Implementation of the Mine Water Concept and for the Integral Monitoring of Mine Water Rise

Based on the articles in the 2020 to 2022 annual reports of the Mining and Energy Department in NRW of the Arnsberg District Government, Dortmund/Germany, this article describes the further progress of the work to implement the mine water concept of RAG Aktiengesellschaft (RAG), Essen/Germany, with regard to the operating plans under mining law and the permits under water law, and provides an overview of the progress of the further development of the integral monitoring for the mine water rise.


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Dennis Bastian
Sven-Uwe Schulz
Potential Price and Supply Risks on the Global Commodity Markets

As a globally important importer of non-energy mineral raw materials, Germany is particularly caught between the current supply situation, changes in demand and geopolitical interests. This results in competition at various levels, on the one hand with regard to a secure and sustainable supply itself, and on the other hand with regard to ensuring a competitive cost structure for the products processed from these raw materials in Germany. This article describes the current challenges on the raw materials markets. It also refers to the latest political measures to flank industry activities in order to reduce their potential price and …


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Stefan Müller
No Energy Transition without Financing Raw Material Projects

The sustainable supply of critical raw materials is at the heart of geopolitical and economic power shifts today. Critical raw materials are not only the key to the energy transition – they are also increasingly seen as a strategic investment. While initiatives from the White House serve as free advertising for the strategic importance of raw materials, they also clearly show that politics has long been driven by raw materials, as the world’s leading industrial nations seek to break their dependence on Chinese raw materials. Capital markets and economic cycles are undergoing structural change, while governments worldwide are designating the secure supply of lithium, copper, antimony and other materials a strategic priority. However, Europe faces a structural challenge …


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Michael Seeger
Rethinking Mining Finance – Capital Structures for Germany and Europe

Europe’s energy transition and industrial sovereignty increasingly depend on secure access to critical raw materials. Yet, mining projects within the European Union and especially in Germany face not geological shortages, but a shortage of structured, risk-adjusted capital. This paper explores how mining finance models must evolve to meet European standards of technical quality, ESG integration and industrial policy alignment. It proposes a new capital blueprint for mining projects at pre-feasibility and feasibility stages, particularly in Germany, where public and private capital must be blended intelligently to unlock high-potential resources. Using the development path of a German metals mining project as a case study …


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Tetiana Dzhumurat
For a Greener Future: The EBRD’s Role in Supporting the Mining Sector

As the world transitions toward a low-carbon economy, the demand for critical minerals has surged, reshaping the mining industry’s role in global supply chains. The European Bank for Reconstruction and Development (EBRD), London/UK, has positioned itself as a key player in financing mining projects that prioritize sustainability, resource efficiency and environmental, social and governance (ESG) standards. The EBRD’s Mining Sector Strategy for 2024 to 2028 emphasizes sustainable and responsible mining, supporting the green energy transition and digital economy. To address the financing gap for early-stage mining companies, the EBRD also introduced the Junior Mining Programme (JUMP), which focuses on critical and strategic raw materials …


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Andreas-Peter Sitte
The German Federal Government’s Raw Materials Fund

Ensuring a sustainable supply of raw materials is one of the key foundations for the German economy, the digital transformation and the achievement of climate targets. The German government has therefore set up a raw materials fund in 2024 to strengthen the supply of raw materials to German companies and the resilience of supply chains and the economy as a whole. The Kreditanstalt für Wiederaufbau (KfW) in Frankfurt am Main/Germany serves as the central point of contact for the raw materials fund …


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Peter v. Hartlieb
Essential Services, Public Services and Mining

The term “Daseinsvorsorge” (essential services) refers to basic public services provided by the state, such as water and energy supply, wastewater disposal, healthcare, social facilities or local public transport. It is a rather formal, administrative and legal term that has rarely been used in everyday language. Many people do not realise its actual meaning, it is simply too abstract. The topic of services of general interest is increasingly appearing in political or professional contexts. Compared to other countries, Germany emphasises local autonomy and diversity, which offers advantages in terms of adapting to regional needs, but also leads to inconsistencies. In principle, however, Germany has nothing to hide …


Order now Mining Report Issue 03_2025 (including this topic)
Read article
Max Kersten
Jule Gleba
Jennifer Albrecht
Nachbergbauzeit NRW 2025. Digitalization Meets Tradition

Long gone are the times of mining officials being trained at the Bochum Mining School. As a result of the continuous post-mining transformation, the traditional buildings are now home of the TH Georg Agricola University (THGA), Bochum/Germany, which prepares young engineers for today’s challenges and tackles the numerous tasks of post-mining. Fitting this year’s theme “Digitalization meets tradition”, multiple generations of experts came together at this historic venue of Nachbergbauzeit NRW 2025. On invitation of THGA’s Research Center of Post-Mining (FZN) and the Arnsberg District Government, around 250 participants with backgrounds from business, science and administration came together on campus …


Order now Mining Report Issue 04_2025 (including this topic)
Read article
Bodo Bernsdorf
Drones as a Tool for Post-Mining Environmental and Geomonitoring Applications

This article is a partial transcript of the opening lecture at the conference “Nachbergbauzeit in NRW 2025”, which took place on 20th March 2025 in Bo-chum/Germany (1). It presents a portfolio from the research environment of the Research Center of Post-Mining (FZN) at the TH Georg Agricola University (THGA) in Bochum. The results are a team effort. They are applications and findings from the field of geomonitoring in old and post-mining areas. Therefore, reference is mainly made to publications by the team.


Order now Mining Report Issue 04_2025 (including this topic)
Read article
Benjamin Haske
Vinicius Inojosa
Development and Evaluation of an Interactive Tool for Multi-Hazard Analysis in European Post-Mining Regions

The closure of hard coal and lignite mines has the potential to result in long-term environmental risks and socio-economic issues. The European project “Post-Mining Multi-Hazards evaluation for land-planning” (POMHAZ), funded by the Research Fund for Coal and Steel, aims to enhance methodological knowledge for multi-hazard analyses at the mining region scale and improve hazard assessment and risk management of former mining regions. The present research proposes a novel approach, which implements a multidisciplinary methodology that integrates historic, geological, topographical, environmental and socio-economic data. The purpose of this integration is to support stakeholders at different decision-making levels. To this end, a Spatial Decision Support System (sDSS) was developed …


Order now Mining Report Issue 04_2025 (including this topic)
Read article
Stefan Möllerherm
REMINDNET – Recovery Mining District Network

There are numerous mining legacies both worldwide and in Europe. They can pose risks to people and the environment. Improperly closed, orphan or abandoned mines therefore represent a difficult legacy for governments, communities and mining companies. Both the closure of current mines and former mines require knowledge and methods to ensure successful remediation. However, there is often a lack of appropriate knowledge and practices in dealing with these contaminated sites. Therefore, natural scientists, geologists, engineers, social scientists, humanities scholars and economists from universities and research institutions as well as experts from public authorities, companies and NGOs have joined forces to form the pan-European network REcovery MINing District NETwork (REMINDNET) to promote the international exchange of knowledge and develop …


Order now Mining Report Issue 04_2025 (including this topic)
Read article
Laura Jonas
Bernhard Hoschützky
Recording Historical Sites from the Point of View of Soil Protection Using the Example of the Callerstolln Mining Field

Department 63 of the Mining and Energy Department in NRW of the Arnsberg District Government, Dortmund/Germany, records former, historical mining sites throughout the state in accordance with the State Soil Protection Act of North Rhine-Westphalia (LBodSchG). The industrial history data collected is archived in a cadastre, the so-called Catalogue of Old and Suspected Mining Areas (BAV-Kat). The aim is to determine information on possible soil changes/pollution caused by decommissioned mining sites such as old deposits, e. g. spoil tips (backfills) and dumping or legacy sites, e. g. former coking plant opencast facilities or extraction sites. The procedure for recording a historical site is illustrated below using the example of the Callerstolln mining field …


Order now Mining Report Issue 04_2025 (including this topic)
Read article
Kai van de Loo
Development Potential of Post-Mining Sites from a Socio-Economic Perspective

From a socio-economic perspective, the development potential of post-mining sites is one of the key issues in post-mining research. To date, there have been a number of case studies and empirical investigations, as well as some generalisations derived from these, particularly in the context of the transformation debate. What is lacking, however, is a comprehensive systematisation that clarifies basic concepts and provides theoretically sound explanations in line with general economic findings. This paper attempts to provide such a socio-economic systematisation. At the centre of this is a 5-factor model …


Order now Mining Report Issue 04_2025 (including this topic)
Read article
Roman Preißler
Advanced First Aid: Mine Rescue Services

Under mining law, mining companies maintain mine rescue services to ensure medical care and transport for injured persons in emergencies. However, changes in German mining mean that optimal medical first aid is not always possible. A new course concept is now intended to ensure that rapid assistance can still be provided in an emergency …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Sebastian Westermann
Bastian Reker
Christian Melchers
Experiences and Findings for Sustainable Mine Water Management in Underground Hard Coal Mining

Managing mine water level rebound is a key task in post-mining operations. The focus here is on finding a controlled, sustainable and ecologically and economically viable solution for all parties involved. Intensive research and scientific monitoring of past and ongoing mine water level rebound in recent decades have enabled reliable control and documentation of the monitored processes, as well as a deeper understanding of the “mine water system” and the processes induced by mine water level rebound on the environment …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Sebastian Grimm
Digitalisation, Automation and Networking – a Comparison of the Automotive and Mining Industries

Advancing digitalisation, automation and networking are transforming industries worldwide. Two industries that are particularly affected by these developments are mining and automotive. While both sectors are being revolutionised by technological innovations, there are significant differences in the way these technologies are used …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Silas Beckord
Moritz Ziegler
Elisabeth Clausen
Integration of a Stereo Camera-Based SLAM-Algorithm for Localization and Mapping in Mining

Automation and autonomisation in the mining industry are advancing, with the efficient navigation of mobile equipment in dynamic mining environments posing a key challenge. This article presents the implementation of a stereo camera-based SLAM (Simultaneous Localisation and Mapping) algorithm for continuous mapping and localisation in open-pit mining. The use of stereovision-based approaches enables three-dimensional capture of the environment …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Nikolaus August Sifferlinger
Eric Fimbinger
Katharina Skoff
Shielding and Robotisation: A New Integrated Concept for Enhancing Safety and Efficiency in Drill-and-Blast Operations

Shielding and robotisation are opening up new perspectives for underground drill-and-blast development. By isolating the high-risk area near the face using a mobile, double-barrier shielding system, the presence of personnel in this zone can be entirely avoided. This shielded system is complemented by an integrated buffer storage unit for the mined material and a controlled material transfer through the shields …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Yusuf Jinadu
Alexander Herdt
Tobias Stiel
Werner Siedentopf
Ground Freezing and TBM Interface Management at the HS2 Project: Practical Experience from Tunnelling in London

The construction of the cross passages in the Northolt Tu:nnels West (NTW) section of the HS2 project in London/UK required artificial ground freezing under challenging geological, logistical and construction-related conditions. The freezing works for eleven cross passages were carried out by the RDMI Freezing JV (Redpath Deilmann GmbH, Dortmund/Germany and DMI Injektionstechnik GmbH, Berlin/Germany) and took place …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Stefan Ebert
Digitalisation in Mining – the Backbone of Smart Energy Management

The 28 member companies of the International Council on Mining and Metals (ICMM) have jointly committed to net zero emissions by 2050. The ICMM includes some of the world’s largest mining companies, such as BHP, Rio Tinto and Anglo American, and represents around one third of the global mining industry (1). A key part of this decarbonisation of mining is the challenge of finding answers to how energy will be managed …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Walter Frenz
RWE Climate Liability According to the Higher Regional Court of Hamm Ruling of 28th May 2025

Are energy companies liable for the consequences of CO2 emissions from coal-fired power generation in this country in distant countries? So is there global climate liability? On 28th May 2025, the Higher Regional Court (OLG) Hamm, Hamm/Germany, issued a spectacular ruling on this issue, ultimately dismissing the lawsuit against RWE AG, Essen/Germany, but only because no concrete danger of damage to the plaintiff’s property in Peru could be proven. On the other hand …


Order now Mining Report Issue 05_2025 (including this topic)
Read article
Helmut Ehnes
Joachim Löchte
Harald Wellhäußer
Christian Melchers
Peter Goerke-Mallet
VISION ZERO Sustainable Mining 2025 Conference: Responsible Leadership – Sustainable Partnership: Shaping the Future of Mining

From 13th to 15th October 2025, the VISION ZERO conference “SUSTAINABLE MINING 2025” took place at the TU Georg Agricola University in Bochum/Germany. During this time, Bochum became the centre of an international discourse on occupational safety, prevention, sustainability and transformation as well as a meeting place for global responsibility: not only was the history of mining reflected upon here, but the future was also shaped – safely, healthily, sustainably and responsibly.


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Tobias Heubach
Christine von Kleinsorgen
Markus Roth
Sustainable Mine Water Management as a Perpetual Task – Mine Water Management in Hard Coal Post-Mining

With the end of hard coal mining in Germany in 2018, the operational need for underground water management ceased to exist. Since then, RAG Aktiengesellschaft, Essen/Germany, has been pursuing the goal of optimising mine water management in an ecologically and economically sustainable manner. The focus is particularly on protecting the surface, improving the ecology of the receiving waters and, depending on the region, protecting the groundwater resources used for drinking water production …


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Kai van de Loo
Post-Mining and German Economic Policy

If post-mining in Germany is viewed as a special economic sector, it is, like any other sector, embedded in the respective economic policy framework and measures, but also has specific economic policy concerns arising from its constraints and interests. These are measured here against the current economic policy positions of the German Chamber of Industry and Commerce (DIHK), Berlin, which are appropriately formulated from a location- and region-specific perspective …


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Deutsches Institut für Normung
A Brief Introduction to Standardisation

The German Institute for Standardisation (DIN), Berlin, is the independent platform for standardisation in Germany and worldwide. As a partner for industry, research and society as a whole, DIN plays a major role in helping innovations – also in mining and the raw materials industry – to reach the market in areas such as the digital economy or society, often within the framework of research projects.


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Jörn Lehmann
International Standardisation in Mining – Transitions, Challenges and Future Prospects

International standardisation in mining is undergoing profound change. Historically dominated by dimensional standards, the focus today is on safety standards, digitalisation, automation and cyber security. International cooperations between standardisation organisations and interdisciplinary expertise are crucial to addressing complex requirements such as battery safety and AI integration. New EU regulations – including the Machinery Regulation, Cyber Resilience Act and Battery Regulation – are driving the adaptation of existing standards and the development of new ones. In addition to technological and regulatory challenges, standardisation requires the promotion of young professionals …


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Peter Goerke-Mallet
Corinne Unger
Tania Laurençont
International Standardisation for Abandoned Mine Management and Post-Mining: Current Developments

Abandoned (legacy) mines globally impact the perception and reality of mining as a sustainable extractive industry. It is only when mine landforms are safe, stable and non-polluting that they have the potential to provide the foundation for sustainable post-mining land uses including being returned to earlier uses or being used for new and even multiple uses. However, the starting point for mining legacies is a degraded biophysical state, perhaps dangerous and where land-connected people and communities have been disconnected and had livelihoods disrupted. The ISO 24419 “Managing mining legacies” standard is a relatively new standard which details how to take negative legacies and create beneficial post-mining uses and social reconnections. Developed in two parts, this standard was informed by the United Nations Sustainable Development Goals (UN SDGs). This context ensured the many and varied dimensions of …


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Martin Wedig
Interaction between Business and Science

From 15th to 19th September 2025, the TU Bergakademie Freiberg in Freiberg/Germany held the conference “Future Open-Pit Mining”. The conference program focused on digitalization, robotics/artificial intelligence (AI), economic optimization, ecological and social challenges, public acceptance/recruitment of young professionals, modern education, research/development and internationalization. On the occasion of this event, the author gave a lecture on the topic “Interaction between Economy and Science” …


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Nina M. Küpper
Bernd G. Lottermoser
Matthais Schmidt
Anna S. Hüncke
Sören E. Schuster
Ethics in Mining: Practice Learning for Future Mining Professionals

The mining sector is characterised by complex ethical challenges in which technological, economic, ecological and social aspects are intertwined. As decision-makers, raw material engineers play a central and responsible role. The project “Ethik im Rohstoffsektor” aims to integrate ethical reflection into engineering education in a sustainable way. International, practice-oriented case studies, such as the …


Order now Mining Report Issue 06_2025 (including this topic)
Read article
Oliver Langefeld
Mareike Schubert
Angela Binder
Yichen Jiang
Blue Mining – Proactive Mine Planning

The Blue Mining approach integrates energy, ergonomics, water and circular economy into a sustainable mining concept. The focus is on energy-efficient mines, the intelligent use of existing infrastructure as storage facilities and optimised water management. Human-centred workplaces and automation promote safety and efficiency. The circular economy enables the recycling and sustainable reuse of resources and equipment. Early planning for post-mining use …


Order now Mining Report Issue 01_2026 (including this topic)
Read article
Elke Mugova
Stefan Klein
Florian Hahn
Geothermal Utilisation of Flooded Underground Mines Based on the Example of a Mine Thermal Energy Storage

In recent decades, former mining infrastructure has been perceived primarily as a financial and environmental burden. Geothermal utilisation has so far only been implemented in a few projects. Recently, a paradigm shift has been observed in this regard. Flooded underground mine workings can represent a geothermal resource, under certain circumstances, the mine water can be used for heating or cooling. Currently more than fifty mine water geothermal plants exist worldwide, most of them are located in Europe and North America and are used for heating purposes …


Order now Mining Report Issue 01_2026 (including this topic)
Read article
Bastian Reker
Jule Gleba
Matic Jovičević-Klug
Patricia Jovičević-Klug
Sebastian Westermann
Remining of Mine Water Sludge – an Update on Successful Metal Extraction

As part of the IAW33 research project, which the Research Center of Post-Mining (FZN) at the Georg Agricola University of Applied Sciences (THGA), Bochum/Germany, launched in 2022, a systematic investigation was carried out into the precipitation products of mine water at active water management sites in the Ruhr area, Saarland and Ibbenbüren with regard to the critical and economically valuable elements they contain. As a result of these analyses, the Ibbenbüren site has proven to be promising for the possible extraction of some critical metals …


Order now Mining Report Issue 01_2026 (including this topic)
Read article
Christian Grineisen
Development and Implementation of an Innovative Sealing Concept for Smaller Shafts in Ore Mining

In 2024, as part of exploratory work in the area of near-surface mining at the Meggen mine, a historic ventilation shaft was investigated using drilling techniques. The investigation revealed that the stepped shaft was partially backfilled with loose material in its near-surface section, while remaining open down to a depth of approx. 64 m. As the long-term structural stability of the initial condition could not be verified, a remediation method was developed to underpin the existing column of loose fill and to …


Order now Mining Report Issue 01_2026 (including this topic)
Read article
Paulina Loskot
Jörg Benndorf
Thomas Martienßen
New Possibilities for Mine Surveying Documentation and Visualisation in Historic Mining

The availability of novel, compact multi-sensor scanning technologies – particularly those integrating LiDAR and imaging sensors – enables time-efficient and often sufficiently precise acquisition of underground 3D geometries. Based on this data, colour-augmented point clouds and interconnected 3D models can be generated, opening up a wide range of applications: from geological and engineering-geological mapping to vivid 3D visualisations for exhibitions …


Order now Mining Report Issue 01_2026 (including this topic)
Read article
Walter Frenz
The new CCS Act for Germany

The new Carbon Dioxide Storage and Transport Act (KSpTG) paved the way for CO2 storage in Germany. The current coalition agreement of the current German government already outlines key strategic priorities that differ significantly from those of the previous coalition. Overall, CO2 storage is also to cover the energy sector, but without domestic coal-fired power generation. Strict standards have been set to prevent any future contamination. It is not yet clear when the first pipelines and storage facilities will go into operation, nor what the costs will be.


Order now Mining Report Issue 01_2026 (including this topic)
Read article
Holger Witthaus
Mareike Schubert
Oliver Langefeld
Sebastian Matz
Modular Submersible Robot for Exploring Flooded Infrastructure in Post-Mining Areas – Development, Challenges and Initial Practical Application

The availability of novel, compact multi-sensor scanning technologies – particularly those integrating LiDAR and imaging sensors – enables time-efficient and often sufficiently precise acquisition of underground 3D geometries. Based on this data, colour-augmented point clouds and interconnected 3D models can be generated, opening up a wide range of applications: from geological and engineering-geological mapping to vivid 3D visualisations for exhibitions, such as those in show mines. Modern methods for processing point clouds, such as so-called “Gaussian Splatting”, have led to significant improvements in rendering sharpness and model accuracy. Using selected examples from the field of historic mining, this contribution provides insights into the potential of current sensor and evaluation methods and illustrates how these technologies can be effectively employed in the documentation and presentation of underground structures.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
Stefan Ebert
We Need to Teach AI About Mining

The human factor: How to truly bridge the gap between physical reality and the digital data world. Although the raw materials industry already employs a wide range of mature digital tools, isolated data silos and proprietary systems often prevent a holistic leap in efficiency. Neither purely technical IT integration nor the unstructured deployment of Artificial Intelligence (AI) solves this problem, as generic AI models lack an understanding of the specific physical and geological reality of a mining operation.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
David Ede
Adam Pekarski
Moritz Ziegler
Elisabeth Clausen
Safety Requirements for Mixed-Traffic Operation of Autonomous Haulage Systems in Surface Mining

This article presented ongoing research efforts at the Institute for Advanced Mining Technologies (AMT) at the RWTH Aachen University, Aachen/Germany, with the goal of enabling the safe integration of autonomous machinery in surface mining operations. It has been highlighted that there is a need for clear standardization of the integration of autonomous machines in mining operations. To this end a novel and structured safety concept for mixed traffic operations is currently being developed.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
Sandra Nowosad
Stephan Oehme
Resource Projects in Western Australia and Perspectives for the Supply Industry

Western Australia is one of the world’s most important mining regions, hosting major projects in iron ore, gold, lithium, nickel, and rare earths. These operations demand high-performance conveying and logistics solutions as well as technologies capable of operating reliably under extreme climatic conditions. For the international supply industry, particularly German companies, this creates new opportunities. Expertise in energy-efficient drive systems, automation, wear protection, and digital monitoring technologies is increasingly sought after and can contribute significantly to efficiency, sustainability, and operational safety in large-scale mining projects.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
Patrick Bädke
Self-Propelled Working Platform for Demolition and Dismantling

A self-propelled working platform was developed for the decommissioning work at the Isar 1 nuclear power plant, combining high positioning accuracy for milling work with conventional concrete demolition in a single system. A key feature is its modular design, which can be adapted to different geometries. This made it possible to minimise the volume of milled material requiring final disposal and the associated costs.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
Attila Baki
Collaborative Project: Battery-Electric Trolley Innovations for Underground Haulage Vehicles in a Swedish Mine

The global mining industry is facing a profound transformation: decarbonisation, rising energy costs and stricter environmental regulations are forcing operators to explore new avenues for the electrification of their processes. This poses particularly high technical challenges in underground mining, as extreme environmental conditions, long transport distances and heavy loads must be managed.
A flagship project in this transformation process is the expansion of a mine in Rävliden, Sweden. Together with Epiroc and an energy and automation partner, the mining company in Rävliden is pursuing the ambitious goal of implementing fully battery-electric powered underground haulage supported by trolleys. The aim is to make material transport completely emission-free, efficient and cost-effective.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
Christian Potthoff
Wassili Simon
Mobile Concrete Transport and Shotcrete Solutions for Mining and Tunnelling

Hermann PAUS Maschinenfabrik GmbH (PAUS) in Emsbüren/Germany, develops and manufactures specialised mobile machinery for mining and tunnelling. With over 50 years experience in the development and construction of high-quality, complex machinery for use in challenging environmental conditions, we have managed to adapt to the ever-increasing demands of mining and tunnelling over the decades and establish ourselves in this international market as a leading supplier of specialised machinery and customised solutions.


Order now Mining Report Issue 02_2026 (including this topic)
Read article
Alev Yalcinkaya
Jonas Kiehl
The Use of Virtual Reality in the Construction and Mining Sector

Virtual Reality (VR) is increasingly transforming the construction and mining industries by improving the visualisation of designs, plan-ning, coordination, collaboration and operational efficiency. Immersive 3D environments enable project stakeholders to better un-derstand complex projects such as infrastructure systems, underground tunnels and mining operations even before physical imple-mentation. In the construction sector, VR supports design validation, collision detection and the involvement of stakeholders, leading to improved decision-making and less rework. In mining, it enables the simulation of hazardous environments, the training of operat-ing personnel, and the optimisation of mining and shaft construction processes …


Order now Mining Report Issue 03_2026 (including this topic)
Read article
Franziska Günther
Amarbayasgalan Baasanzorig
Max Friedemann
Evaluation of a Continuously Measuring Point Sensor for Determining Air Velocity

Mine ventilation is of central importance for safety in underground mining. It can account for up to 50 % of total energy consumption. To improve efficiency, optimised control is necessary, which requires continuous measurement of air velocity. One option for data acquisition is cross-sectional-representative ultrasonic systems, which provide precise measurements; however, these are costly and site-specific. In this paper, a continuously measuring ultrasonic point sensor is investigated as an alternative in the Research and Teaching Mine at Tech­nical ­University (TU) Berg­akademie Freiberg, Freiberg/Germany, and compared with a reference system. A correlation between local and cross-section-averaged velocity was derived using regression analysis …


Order now Mining Report Issue 03_2026 (including this topic)
Read article
Volker Spreckels
Development and Establishment of Calibration and Validation Sites for Radar Interferometric Analyses (InSAR) for Monitoring Ground Movement caused by Mine Water Rebound during the Post-Mining Era

For several years now, satellite-based radar interferometry (InSAR) have been establishing themselves in day-to-day operations for the large-scale monitoring of ground movements in areas of both active and decommissioned mineral extraction. The combination of remote sensing techniques, such as satellite navigation (global satellite navigation system, GNSS) and interferometric synthetic aperture radar (InSAR), with traditional terrestrial surveying methods such as levelling and tacheometry holds great potential for reducing the time and labour-intensive terrestrial surveying to the absolute minimum required. During the transitional period required for this system conversion, these new methods must be examined and tested for their suitability, quality and robustness in order to be recognised and approved for use in mining documentation or within the framework of regulatory requirements …


Order now Mining Report Issue 03_2026 (including this topic)
Read article
Tim Kuhne
Joint Storage of Lithium-Ion Batteries and Oxygen Self-Rescuers – Recommendations for Safe Operation

Lithium-ion batteries (LIBs) and oxygen self-rescuers (SSRs) are standard equipment, particularly in the mining industry. Both product groups are frequently made available to staff in lamp rooms, equipment issue points and charging areas in close proximity for collection at the start of a shift. This brings together different hazard mechanisms: in the event of a fault, LIBs can lead to thermal runaway, resulting in fire and the release of hazardous fumes. SSRs release chemically bound oxygen and may therefore support or intensify combustion.


Order now Mining Report Issue 03_2026 (including this topic)
Read article
Ivonne Arenz
CRMA – the “Green-Deal-Paradox”?

The Critical Raw Materials Act (CRMA) represents the European Union’s key legislative framework for securing a resilient, sustainable and competitive supply of critical and strategic raw materials. Its objectives are to strengthen domestic extraction, processing and recycling capacities, diversify supply chains, accelerate permitting procedures for Strategic Projects, and reduce Europe’s strategic dependencies while maintaining high environmental standards. At the same time, the implementation of these objectives reveals a fundamental challenge …


Order now Mining Report Issue 04_2026 (including this topic)
Read article
Blas Urioste
Awareness Alone is not Enough – KSL Kupferschiefer Lausitz Caught Between the Need for Raw Material Security and Reality: “Mining with ESG” within the European Raw Materials Framework

The European Union’s Critical Raw Materials Act (CRMA) has highlighted the strategic importance of domestic raw materials projects. At the same time, a tension is evident in specific projects: whilst Europe calls for more resilient supply chains, strategic autonomy and raw materials security, individual projects on the ground are assessed primarily on the basis of environmental compatibility, energy integration, the circular economy, regional value creation and social acceptance. The Spremberg-Graustein-Schleife copper project by KSL Kupferschiefer Lausitz GmbH, Spremberg/Germany, in Lusatia is a prime example of this new evaluation framework …


Order now Mining Report Issue 04_2026 (including this topic)
Read article
Birgit Linnamäe
Regional Capabilities and the Organization of Global Mining Value Chains – How Smaller Open Economies Contribute to Critical Raw Materials Supply Chains through Digital Intelligence, Certified Engineering, and Knowledge Infrastructure

The article examines the role of smaller open economies in global mining and critical raw materials value chains. Its central argument is that mining value chains may be global in reach, but their actual performance depends on the depth of regional industrial capability. Using Estonian company cases, the article analyses three pathways into mining-related value chains: digital intelligence, certified engineering capability and knowledge infrastructure. The cases show that smaller firms do not need to compete through scale. Instead, they can create significant value at narrow, but strategically critical niche interfaces …


Order now Mining Report Issue 04_2026 (including this topic)
Read article
Arun M. Vijayan
Strategic Pathways to De-Risk and Decarbonize Rare-Earth Supply Chains – A Responsible Supply Lens on Building Resilient, Low-Emission Rare-Earth Value Chains by 2030

Rare-earth supply chains face a triple challenge: geographic concentration, high carbon intensity, and structural bottlenecks in the midstream. While demand from electric vehicles, wind energy, robotics, and defence is projected to reach approximately 100,000 t by 2030, the current supply architecture is not built to support this scale-up at speed. This article argues that rare-earth risk is not primarily a mining problem: the true point of control lies in the midstream: separation, metal and alloy conversion, and magnet manufacturing, where single-country concentration reaches an estimated 90 % or more. Diversification strategies that stop at mining, including popular “China+1” approaches, improve visibility but not control. Drawing on Beroe analysis and data from the United States Geological Survey (USGS), the International Energy Agency (IEA), Argus Media, and other industry sources, the article maps the policy landscape across Europe, the United States, India, and Japan, evaluates cleaner processing and circular feedstock as decarbonization levers, and sets out a 2030 roadmap in which competitiveness is defined jointly by cost, carbon, and resilience …


Order now Mining Report Issue 04_2026 (including this topic)
Read article
Toni Schmidt
Carsten Drebenstedt
Developing Strategies to Reduce the Shortage of Skilled Labour, using Skilled Workers in the Mining Industry as an Example

Supplying the economy with qualified skilled workers is a fundamental prerequisite for maintaining Germany’s position as a business location and ensuring stable economic growth to safeguard prosperity in the coming decades. A shortage of skilled workers has existed for several years, particularly at the level of skilled tradespeople, and this is set to intensify further in the coming years as a result of demographic change. One way of tackling the skills shortage is to minimise mismatches. To this end, a user model has been developed and validated using scientific methods. On the one hand, this model can be used directly by companies to develop strategies for securing their own supply of skilled workers. On the other hand, the model is used to derive recommendations for action for the individual partners in the dual vocational training system …


Order now Mining Report Issue 04_2026 (including this topic)
Read article
Stefan Ebert
From Data to Decisions – where Digital Value is Truly Created

Digital technologies are now widely available in the mining sector. Nevertheless, many digitalisation initiatives fail to deliver the expected economic benefits. The reason often lies not in the technology itself, but in a lack of prioritisation, unclearly defined use cases and disconnects between data, insights, decisions and operational implementation. This paper demonstrates why a use case should always describe a better operational decision, at what point responsibility shifts from the technology provider to the operator, and how breaks in the digital value chain can be systematically identified. Only when insights are translated into changed behaviour does a Proof of Concept become a robust Proof of Value …


Order now Mining Report Issue 04_2026 (including this topic)
Read article
Peter Goerke-Mallet
Tobias Rudolph
Andreas Müterthies
Developing Local, Sustainable and Resilient Solutions for the Challenges in Mining

Mining and subsurface storage of resources are essential for securing mineral and energy resources, but their impacts on the environment and local communities can generate conflicts and challenge the social license to operate. This paper presents an approach for developing local, sustainable and resilient solutions based on the systematic integration of geoinformation, remote sensing, scientific monitoring and public participation. The Gronau-Epe cavern facility in Germany serves as a practical case study. A research collaboration involving the municipality, a local citizens’ initiative, science and industry was established to jointly investigate mining-related processes and their impacts on the surface. The study demonstrates how a comprehensive range of geodata can provide a transparent and scientifically sound basis for monitoring and communication. The analysis shows that observed ground movements cannot always be attributed solely to mining activities; natural processes such as soil swelling and shrinkage related to precipitation and drought may also contribute significantly …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
Eric Pohlmann
Autonomous Underground Loading and Transport Systems – Robust Safety architecture and Practical Implementation

Automation in the mining industry has experienced a significant surge in development thanks to advances in the three areas of sensor technology, artificial intelligence (AI) and software architecture. Autonomous underground loading and transport systems boost productivity, improve safety and enable more efficient use of resources. Robust, cost-effective LIDAR and RADAR sensors from the automotive industry, together with modular software frameworks, form the basis for practical, bespoke automation solutions in mining. The Autonomous Operator System (AOS) developed by Nerospec SK GmbH, Velbert/Germany, enables fully autonomous driving cycles without human supervision. Control is carried out without cameras or broadband networks, enabling the system to operate reliably even in isolated underground environments. An integrated safety architecture, certified to ISO 13849 and IEC 61508, continuously monitors the vehicle’s functions and actively intervenes when necessary to bring the vehicle into a safe state …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
André Zucker
Sebastian Stelter
Project Löwenstern, Sediment-Hosted Copper Exploration

The “Löwenstern” exploration project investigates sediment-hosted copper-silver mineralization of the Kupferschiefer type west of Meiningen in Thuringia/Germany. Geophysical surveys have been conducted since 2021, followed by a drilling program launched in 2023 that has so far included 15 boreholes. The work confirmed indications of a mineralized system in the lowermost Zechstein strata at all investigated locations, including copper sulfides and associated silver, lead, and zinc mineralization. The exploration faced geological uncertainties and technical challenges, which were addressed through adjustments to the drilling plan and interdisciplinary collaboration. The continuity and economic potential of the mineralization have not yet been established; further infill drilling and accompanying environmental, social, and technical studies are planned to support a robust assessment …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
Gregory Abramov
Artificial Intelligence and Digital Twin Technology in Borehole Mining

Borehole Mining (BHM) is a remotely operated, waterjet-based mining method that allows mineral extraction through a borehole without human presence underground. This remoteness is one of BHM’s principal advantages, but it also creates a fundamental operational limitation: the operator has only limited, indirect information about the conditions and geometry of the underground excavation. As a result, important decisions are often reactive and may contribute to ore dilution, under-recovery, premature stope collapse, uncontrolled subsidence, or inefficient use of water and pumping energy. This paper proposes a conceptual approach in which geological characterization, physical-property testing, three-dimensional modeling, and rock-mechanics simulation provide the knowledge base for a BHM Digital Twin (DT). The DT would represent the orebody and hosting rocks together with their relevant physical and geomechanical properties and would provide predicted responses to alternative extraction scenarios. During mining, monitoring data could be compared with these predictions by Artificial Intelligence …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
Sandra Nowosad
Understanding the Historical Development and Recurring Implementation Challenges of Mine Automation

Mine automation has developed through diverse technological, regional and operational pathways, encompassing remote control, computerised machine functions, autonomous equipment and interconnected operations. Drawing on patents, academic publications, technical reports, industry records, guidance and standards, this article examines five overlapping themes in that history: the ambition to remove people from hazardous working areas; the challenge of enabling machines to perceive and respond; commercial adoption; dependencies between automated equipment and wider mine systems; and emerging perspectives on intelligent mining and human-technology collaboration. A focused literature comparison identifies four recurring implementation concerns: communications, sensing and localisation, interoperability, and human participation. Selected regional cases and market inventories illustrate differences in the scale and forms of adoption across surface and underground mining. …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
Marcin Pawlik
Tobias Rudolph
Peter Goerke-Mallet
Stefan Möllerherm
Christian Melchers
Coal-Mining Heaps as Anthropogenic Landforms and Industrial Heritage in Germany

Hard coal heaps represent a long-term anthropogenic landform and form post-mining landmarks in Germany. Using a comparative regional approach, the study analyses the relationship between mining intensity, industrialization pathways, coal heap morphology and post-mining transformation processes in selected German hard coal mining districts. This is part of the scientific project titled “Fire Risk Assessment and Management of European Coal Heaps” (FRAM), which is funded by the European Union’s Research Fund for Coal and Steel (RFCS) under Grant Agreement No. 101216667. Particular attention is given to the Ruhr area, Saarland, Aachen coalfield, Saxon mining districts and smaller coalfields across Germany. Historical analysis, geomorphological interpretation and post-industrial landscape research are combined to evaluate how regional differences in mining development influenced the formation, preservation and contemporary functions of coal heaps. The results demonstrate that coal heap morphology and visibility are closely connected to the scale and duration of industrial extraction, topographic conditions and reclamation strategies …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
Marcus A. Volz
Lithium in Argentina and Chile – Two Market Models and their Significance for Mining Suppliers

Argentina and Chile are among the world’s leading lithium producers, but differ in terms of their market and project structures. Argentina has larger lithium resources, whilst Chile is significantly ahead in terms of recoverable reserves and annual production. In both countries, lithium production is concentrated in the High Andes region along their shared border, with Chile’s focus being on the Salar de Atacama (Figure 1). This article compares the institutional frameworks and project structures of the two countries. It also examines the resulting technical requirements and procurement channels for mining suppliers …


Order now Mining Report Issue 05_2026 (including this topic)
Read article
Stefan Thiem
Saving the Turmhofer Stamp Mill Waterwheel in Freiberg – a Unique Engineering Monument to 19th-Century Ore Mining in Freiberg

The Turmhofer stamp mill waterwheel is the last water wheel from the German ore mining industry that is still largely preserved in its original state and, at the same time, fully functional. From 1846 to 1889, it served as the driving force for a wet crushing mill at the Turmhofer stamp mill and ore dressing plant in Freiberg/Germany. Since May 2025, damage to the wheel shaft has prevented the plant from continuing to operate. To prevent further damage resulting from the shutdown and to preserve this unique technical monument for the long term, a working group from the Förderverein Himmelfahrt Fundgrube Freiberg/Sachsen e.V. is planning a comprehensive restoration. A crowdfunding campaign was launched on 1 October 2026 to finance the project. This article explains the historical significance of the waterwheel, the causes of the damage and the planned repair measures.


Order now Mining Report Issue 05_2026 (including this topic)
Read article

PUBLIC ARCHIVE OF MINING REPORT GLÜCKAUF

In the public archive of Mining Report Glückauf you will find all public content (requires no login).

Switch to public archive
Back to top button